User manual

6 EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Prepare the remote control
Caution

Risk of explosion! Keep batteries away from heat,

 Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
 Perchlorate Material-special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
 The battery contains chemical substances, so it should
be disposed of properly.

Remove the protective tab to activate the
battery.

1 Pull out the battery tray and remove the
old battery.
2 Place a new lithium CR2025 battery into

as indicated.
3 Insert the battery tray back into the slot.
CR2025
CR2025
1
2
3
Connect power
Caution

Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the unit.
 Risk of electric shock! When you unplug the AC

pull the cord.
Connect the AC power adaptor to
 the power socket at the back of the
speaker.
 the wall outlet.
Turn on
Press .
» The Bluetooth indicator
begins to
blink.
Switch to standby mode
Press again to switch the docking speaker to
standby mode.
» The Bluetooth indicator
turns off.