Register your product and get support at AJ3138 User manual
Contents 1 Important Safety Notice 2 2 4 2 Your clock radio 7 Introduction What’s in the box Overview of the main unit 7 7 3 Get started 9 11 Install batteries Connect power Set time and date 11 12 13 4 Listen to radio 14 Tune to a radio station Program radio stations automatically Program radio stations manually Select a preset radio station 14 Stop alarm ring 19 View the alarm settings 19 6 Other features 20 Set the sleep timer 20 Set nap timer 20 Record a piece of sound 20 Adjust the vo
1 Important Safety a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat UHJLVWHUV VWRYHV RU RWKHU DSSDUDWXV LQFOXGLQJ DPSOLÀHUV that produce heat.
l Unplug this apparatus during lightning storms or when unused for long periods of time. m 5HIHU DOO VHUYLFLQJ WR TXDOLÀHG VHUYLFH SHUVRQQHO 6HUYLFLQJ is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Warning Never remove the casing of this apparatus. Never lubricate any part of this apparatus. Never place this apparatus on other electrical equipment. .HHS WKLV DSSDUDWXV DZD\ IURP GLUHFW VXQOLJKW QDNHG ÁDPHV RU heat. Never look into the laser beam inside this apparatus. Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power. Notice This product complies with the radio interference requirements of the European Community. $Q\
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
The making of unauthorized copies of copy-protected material, LQFOXGLQJ FRPSXWHU SURJUDPV ÀOHV EURDGFDVWV DQG VRXQG recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes.
2 Your clock radio Congratulations on your purchase, and welcome to Philips! To fully EHQHÀW IURP WKH VXSSRUW WKDW 3KLOLSV RIIHUV UHJLVWHU \RXU SURGXFW at www.philips.com/welcome. Introduction With this clock radio, you can: Enjoy the FM radio Know the time Wake up to buzz, favorite radio tone, or recorded sound Set two alarms to ring at different time.
User Manual 8 EN
Overview of the main unit a k b c d e j i f l h m n o g a b c d e volume Adjust volume. mic Built-in microphone. repeat alarm/brightness control Repeat the alarm. Adjust the display brightness. tuning Tune to a radio station.
f radio Turn on/off the radio. g Battery compartment Antenna (Inside the battery compartment) h AC IN jack i j k l m n o set/scan Set the clock. Scan radio stations. Program radio stations. +/- Tune to a radio station. Select a preset radio station. Adjust time. Select time format. / Set the alarm timer. View the alarm time. Turn on/off the alarm. rec/play Record a piece of sound. Play the recorded sound. display Display information.
3 Get started Always follow the instructions in this chapter in sequence. Install batteries Caution Risk of explosion! Keep batteries away from heat, sunshine or ÀUH 1HYHU GLVFDUG EDWWHULHV LQ ÀUH Risk of product damage! When the apparatus is not used for long periods, remove the battery. Batteries contain chemical substances, so they should be disposed of properly. 1 2 Open the battery compartment. Insert 3 AAA batteries (not supplied) with correct polarity (+/-) as indicated.
Tip When the unit is powered by battery, the screen lights up for 5 seconds after any operation. Connect power Caution Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the apparatus. Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. Before connecting the AC power cord, ensure you have completed all other connections.
Set time and date 1 In clock mode, press set/scan. » The hour digits begin to blink. 2 3 4 5 6 7 8 Press +/- to set hour. Press set/scan WR FRQÀUP Repeat steps 2-3 to set the minute. Repeat steps 2-3 to select 12 hour or 24 hour format. Repeat steps 2-3 to set the year. Repeat steps 2-3 to set the date. Repeat steps 2-3 to set the month-day display mode.
4 Listen to radio Tune to a radio station 1 2 Press radio to turn on the radio. Rotate tuning clockwise or counter-clockwise to tune to a radio station. Program radio stations automatically Note You can program a maximum of 20 preset radio stations. 1 2 Press radio repeatedly to turn on the radio. Press and hold set/scan for 2 seconds. » All available stations are programmed in the order of waveband reception strength. » 7KH ÀUVW SURJUDPHG UDGLR VWDWLRQ EURDGFDVWV DXWRPDWLFDOO\ Program radio stati
2 3 4 5 6 Rotate tuning clockwise or counter-clockwise to tune to a radio station. Press set/scan. » The number begins to blink. Press +/- repeatedly to select a preset number. Press set/scan WR FRQÀUP Repeat the above steps to program more stations. Tip To overwrite a programmed station, program another station in its place. Select a preset radio station 1 2 Press radio to turn on radio. Press +/- to select a radio station.
5 Set the alarm timer You can set two separate alarms. For the alarm tone, you can select the buzz, the FM radio, or a piece of recorded sound. 1 Before you start, ensure that the time is set correctly. 2 Press / . or is displayed. » 3 Press set/scan. » The hour digits begin to blink. 4 5 Press +/- to set the hour. Press set/scan WR FRQÀUP » The minute digits begin to blink. 6 7 Repeat steps 3-5 to set the minute.
EN 17
Tip / to start alarm setting. You can also press and hold The gentle wake-up function is designed for buzzer/radio source only. 7R DGMXVW YROXPH IRU WKH UDGLR VRXUFH H[LW WKH DODUP PRGH ÀUVW Turn on/off the alarm timer Note Ensure that you already set the alarms successfully. Press or repeatedly to turn on or off the alarm timer. or appears. » If the alarm timer is turned on, » If the alarm timer is turned off, or disappears.
Stop alarm ring 1 When the alarm rings, press the corresponding or » The alarm stops but the alarm settings remain. . View the alarm settings 1 Press / or display.
6 Other features Set the sleep timer You can set the clock radio to turn off automatically after a certain period of time. 1 Press sleeprepeatedly to select time (in minutes). » The apparatus turns off automatically after the set period of time. To turn off the sleep timer: 1 Press sleeprepeatedly until [OFF] (off )appears or press radio. is displayed when sleep timer is on and disappears » when it is off. Set nap timer 1 1 Press nap repeatedly to select the nap time (in minutes).
1 Press and hold rec/play during the whole process of recording. » [ REC] is displayed. » When the sound is recorded, is displayed. Tip Keep the sound source close to mic on the top of the unit. To play the recorded sound, press rec/play. is displayed. » Adjust the volume level 1 Rotate volume to increase/decrease the volume level. Adjust display brightness 1 Press repeat alarm/brightness control repeatedly to turn on/off the backlight of the display.
1 To deactivate the backlight blinking function Press and hold repeat alarm/brightness control for 5 seconds again. Change the decorative ring and knobs Note You can change the decorative ring and knobs with the supplied ring and knobs. 1 To change the decorative ring Rotate the ring counter-clockwise. » The ring separates from the main unit. 2 Place the ring to be installed onto the main unit.
3 1 2 Rotate the ring clockwise. » The ring is installed. To change the knobs Pull the knobs directly out of the socket. Plug the knobs to be installed into the sockets.
7 Product information Note Product information is subject to change without prior notice. 6SHFLÀFDWLRQV 7XQHU )0 Tuning Range 87.
Operation Power Consumption 2W Standby Power Consumption <0.5W Dimensions - Main Unit (W x H x D) 103 x 102 x 103 mm Weight - With Packing - Main Unit 0.6 kg 0.
8 Troubleshooting Caution Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/support). When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available.
Clock/timer setting erased Power has been interrupted or the power plug has been disconnected. Reset the clock/timer.
2013 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product. WOOX Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. AJ3138_05_UM_V1.