Always there to help you Register your product and get support at www.philips.
1 Important Important safety information Notice 2 2 2 2 Your WeCall speaker 4 4 4 5 3 Get started 6 6 6 6 4 Use the WeCall speaker 8 8 Introduction What’s in the box Product overview Charge the WeCall speaker Turn on the WeCall speaker Connect the WeCall speaker Use as a speaker phone Use together with the WeCall App (for iPhone or Android phone) Use as a Bluetooth or PC speaker English Contents 8 9 5 Product information 11 6 Troubleshooting 12 EN 1
1 Important • Do not place any sources of danger on the device (e.g. liquid filled objects, lighted candles). Warning Important safety information The translation of this document is for reference only. In the event of any inconsistency between the English version and the translated version, the English version takes precedence. • Follow all instructions. • Heed all warnings. • Do not use this device near water. • Clean only with dry cloth. • Do not block any ventilation openings.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
2 Your WeCall speaker To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. Introduction This Bluetooth conference speaker (WeCall speaker) allows you to: • connect to a Bluetooth enabled smartphone and make a mobile or VoIP call directly through the WeCall speaker. • connect to a PC/Mac through the supplied USB cable and make a VoIP call directly through the WeCall speaker.
English Product overview a i h g b f c e d f USB/ / a • Adjust volume during a call or music play. b ON/OFF power switch • Power on or off the WeCall speaker. Remove the existing pairing information. Turns red when the battery is running low, or when you charge the WeCall Speaker. e Micro USB socket • Switch between the USB or Bluetooth audio sources. • Answer an incoming mobile call. • End an ongoing mobile call.
3 Get started Turn on the WeCall speaker • Slide the power switch to the ON position. »» In Bluetooth mode, the status indicator turns blue. »» In USB mode, the source indicator turns green. • To turn off the WeCall speaker, slide the power switch to the OFF position. Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence.
Enable Bluetooth on your Bluetoothenabled device. Option 2: Connect through USB 3 Select ‘Philips WeCall speaker‘ on your Bluetooth-enabled device and if necessary input ‘0000’ as the paring password. »» The source indicator starts to flash blue. »» After successful pairing and connection, the source indicator turns solid blue and the WeCall speaker beeps.
4 Use the WeCall speaker If the WeCall speaker has been connected to a PC/Mac through the USB cable: Use as a speaker phone If the WeCall speaker has been connected to a Bluetooth-enabled mobile phone or other devices such as a tablet or PC/Mac: 1 Make sure that you have selected the Bluetooth source on the WeCall speaker. 2 Make a mobile or VoIP call on your mobile phone, or a VoIP call (such as a SkypeTM call) on your tablet or PC/Mac. 3 Use the WeCall speaker as a speaker phone during the call.
Set up Bluetooth connection between the WeCall speaker and your iPhone or Android phone (see ‘Option 1: Connect to a Bluetooth-enabled device’ on page 6). 3 Run Philips WeCall and import meetings from your calendar. • The potential conference calls will be highlighted. Choose one of them. 5 Make a conference call. English 2 Tip •• During a call, you can use / on the WeCall speaker to adjust volume. •• During a call, you can press to mute the WeCall speaker so that the other party cannot hear you.
Tip •• During audio play, you can use speaker to adjust volume. •• During audio play, you can press WeCall speaker.
English 5 Product information Amplifier Rated Output Power Frequency Response 2W RMS 80Hz -16k Hz, ±3dB >75dB Signal to Noise Ratio Bluetooth Bluetooth® version Frequency band Range V2.1 + EDR 2.402-2.480 GHz ISM Band 10m (free space) Speakers Speaker Impedance Speaker Driver Sensitivity 4ohm 1" speaker >84dB/1W/1m General Information DC Power Input Battery Dimensions - Main Unit (w x h x d) Weight - With Packing - Main Unit Input: 5 VDC, 1 A Model No.
6 Troubleshooting Warning •• •• •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
2014 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product. WOOX Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. AECS7000E_00_UM_V2.