operation manual

Note

• Insert the lters in the correct position.

• Make sure you place the lters in the order of

HEPA lter, activated carbon lter, and nally the

pre-lter.

• Make sure that the side with the tag is pointing

towards you.

1 Switch off the purier and unplug it.

2 Place your ngers in the recesses of the side

panels and gently pull the bottom part of

the front panel towards you. Lift the panel

out of the hooks at the top of the purier.

3 Remove the lters using the tag on the lter.

Take the lters by both sides and gently

deposit them into the house hold trash bin.

7 Replace the

filters

The lter replacement light ( ) indicates the

lters have to be replaced.

Note

• If you remove the front panel for lter changing

while the purier is switched on, all lights on the

control panel will be off.

• Once the front panel is placed back to the purier,

all lights ash twice. Then, the purier is off. Press

the



button to switch on the purier again.

Replace the activated carbon

lterandtheHEPAlter

Note

• The activated carbon lter and the HEPA lter are

not washable nor vacuum cleanable.

Replace both the activated carbon lter and

HEPA lter when the

light goes on. This will

last for approximately 2 weeks.

On the last day of the 2 weeks, the purier

beeps every 30 minutes to inform you that the

lter needs to be replaced.

Tip

• When you remove or insert lters, place the

purier against a wall for more stability.