Wireless Speaker 7000 Series S7807 User manual Register your product and get support at: www.philips.
Contents 1 Important Safety 2 2 2 Your wireless speaker Introduction What's in the box Overview of the speaker 3 3 3 3 3 Get started Charge the built-in battery Turn on/off 4 4 4 4 Play from Bluetooth devices Play from Bluetooth devices Multi-point connection Control playback Control phone call Trigger voice assistant of your mobile device Pairing for stereo mode 5 5 6 6 6 5 Product information 7 6 Troubleshooting General Bluetooth 8 8 8 7 9 9 9 10 10 Notice Compliance Care of the environment
1 Important Safety Important safety instructions • Make sure that the power supply voltage corresponds to the voltage on the back or the underside of the unit. • The speaker shall not be exposed to dripping or splashing. • Do not place any source of danger on the speaker (e.g. liquid filled objects, lit candles). • Make sure that there is enough free space around the speaker for ventilation. • Please use the speaker safely in an environment with temperature between 0℃ and 45℃.
2 Your wireless speaker 1 • Turn the speaker on or off. 2 Congratulations on your purchase, and welcome to philips! To fully benefit from the support that philips offers, register your product at www.philips.com/support. • Press and hold to enter stereo pairing mode. 3 • Enter Bluetooth pairing mode. • Clear Bluetooth pairing information. What's in the box Check and identify the contents of your package: • • • • • • 4 • In Bluetooth mode, press to pause or resume play.
3 Get started Always follow the instructions in this chapter in sequence. Power off When the speaker is being charged, Power/Bluetooth LED blinks red slowly. When the speaker is fully charged, Power/Bluetooth LED is off. Charge the built-in battery The speaker is powered by a built-in rechargeable battery. Note • Fully charge the built-in battery before using. • When the speaker is turned on and the battery is low, the Power/Bluetooth LED indicator blinks red.
Caution • Risk of speaker damage! Make sure the power supply voltage corresponds to the voltage printed on the back or the underside of the speaker. • Risk of electric shock! When unplug the USB cable, always pull the plug from the socket. Never pull the cable. • Use only a USB cable specified by the manufacturer or sold with this speaker. 4 Play from Bluetooth devices Play from Bluetooth devices With this speaker, you can enjoy audio from your Bluetooth device. Press to turn the speaker on.
Power/Bluetooth LED indicator Description Blinking white quickly Ready for pairing Blinking white slowly Reconnecting the last connected device Solid white Connected • To disconnect a device, press and hold for 3 seconds until the Power/ Bluetooth LED indicator blinks white quickly. • To clear the pairing information, press and hold for 8 seconds until the Power/Bluetooth LED indicator blinks white slowly for 3 times. Multi-point connection Pairing • Pair the speaker to two devices, e.g.
Pairing for stereo mode Two identical wireless speakers (Philips S7807) can pair with each other for stereo sound. Note • Any speaker can be used as the primary speaker. • The speaker connected to a Bluetooth device can only be used as the primary speaker. • Before stereo pairing, make sure that the secondary speaker is under Bluetooth pairing mode. • Keep a maximum distance of 20 meters (66 feet) between the speaker and your Bluetooth device.
6 Troubleshooting Warning • Never remove the casing of the speaker. To keep the warranty valid, never try to repair the speaker yourself. If you encounter problems when using this speaker, check the following points before requesting service. If the problem remains unsolved, go to the Philips website (www.philips.com/support). When you contact philips, ensure that the speaker is nearby and the model number and serial number are available. General No power • Make sure the speaker is fully charged.
7 Notice Any changes or modifications made to this device that are not expressly approved by MMD Hong Kong Holding Limited may void the user's authority to operate the equipment. Compliance Hereby, TP Vision Europe B.V. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/ 53/EU. You can find the Declaration of Conformity on www.philips.com/support.
FCC and IC statement FCC information The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: This device may not cause harmful interference, and. This device must accept any interference received, including interference that may cause undesired operation. Warning:Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Specifications are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product. TAS7807_00_UM_V1.