8959 Series User Manual 43PUS8959 50PUS8959 55PUS8959 65PUS8959 Register your product and get support at www.philips.
Content 1 Home Screen Overview 2 Get Support 4 5 2.3 TV Diagnose and Self-diagnose 5 2.4 Consumer Care / Repair 3 Quick Guide 5 29 12 5.3 Satellite 12 5.7 Other Device 5.8 Bluetooth® 5.9 Computer 12 12 13 14 15 29 30 31 31 11.3 Eco Settings 47 31 12 Gaming Control Bar 48 13 Smart TV and Apps 49 13.1 Setup Smart TV 49 13.2 Store of Apps 12 29 11.1 Quick Menu and Frequent Settings 11.2 All Settings 10 12 5.6 Mobile Device 11 Open TV Setting Menus 10 5.1 Connectivity guide 5.
20.3 End of Use 57 21 Specifications 58 21.1 Power 58 21.3 Display Resolution 58 21.2 Reception 21.4 Supported Input Resolution 21.5 Sound 21.6 Multimedia 21.7 Connectivity 22 Troubleshooting 58 58 58 58 59 60 22.1 Tips 60 22.3 Remote Control 60 22.2 Switch On 22.4 Channels 22.5 Satellite 22.6 Picture 22.7 Sound 22.8 HDMI - UHD 22.9 USB 22.10 Wi-Fi and Internet 22.11 Wrong Menu Language 23 Safety and Care 60 60 61 61 62 62 63 63 63 64 23.
1. Home Screen Overview Sources Select SOURCES to view and change to available sources in this TV. Note: • If your installed country is Germany or France, there will be additional Public Value tab on home screen to list Featured apps. • If your installed country is UK, there will be additional TV Guide tab on home screen to link the TV Guide of your installed TV channels. To enjoy the benefits of your Smart TV, connect the TV to the Internet.
2. Get Support 2.3. TV Diagnose and Selfdiagnose 2.1. Identify and Register your TV TV diagnose You can run the TV diagnose test to check the condition of your TV. At the end of the diagnose, TV will clear the cache memory and close any unused apps to continue the smooth functioning of your TV. Identify your TV - TV model number and serial number You might be asked to provide the TV product model number and serial number.
2.4. Consumer Care / Repair For support and repair, call the Consumer Care hotline in your country. Our service engineers will take care of a repair, if necessary. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/TVsupport and select your country if needed. TV model number and serial number You might be asked to provide the TV product model number and serial number.
3. Quick Guide the MENU key to show the Gaming control bar when game signal detected and game mode enabled. 6 - Alexa Press and hold to talk to Alexa, interrupt an Alexa response, or stop an Alert. When Alexa is responding to your utterance or playing media, press again to stop or attenuates playback. 3.1. Remote Control Key Overview Middle Top The feature of Hidden keys Hidden keys will be appeared to extend more control functions while pressing the 123 key.
10 - SUBTITLE To open Subtitle page. Long press to open or close Text/Teletext. • Pause , to pause playback • Rewind , to rewind • Fast forward , to go fast forward 11 - TV () / EXIT To switch back to watch TV or to stop an interactive TV application. However, it might not work on some applications; behaviour is dependent on third party TV apps. This key will be changed to Number key 0 after 123 key is pressed. 6- To launch the Amazon prime video App. 7- To launch the Titan Channels App.
control > Remote control info For more information, in Help, select Keywords and look up End of use. Once the remote control is paired, you can check the current remote control software version. (Home) > Settings > Wireless & network > Remote control > Update remote control software Cleaning Your remote control is treated with a scratch-resistant coating. Check available remote control software for updates. To clean the remote control, use a soft damp cloth.
4. Setting Up Wall Mounting 4.1. Read the Safety Instructions The wall mount size may vary depending on different type of back cases; refer to the Quick Start Guide in your product package to see which size is applied to your TV. Your TV is also prepared for the wall mount bracket (sold separately). Use the following wall mount dimension when purchasing the wall mount. Please read the safety instructions before you use the TV.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On Press the small joystick key on the bottom of the TV. Switch to standby To switch the TV to standby, press on the remote control. You can also press the small joystick key on the bottom of the TV.
5. Connections 5.1. Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu. 5.4.
HDMI ARC/eARC Headphones Only HDMI 2 on the TV have HDMI ARC (Audio Return Channel). You can connect a set of headphones to the connection on the side of the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV.
device on TV. The TV will switch back to the last selected programme. Casting App From the TV Casting app is a streaming mobile app on your TV. It will cast the streaming contents from mobile device to your TV via AirServer. To stop watching the screen of the device on TV, you can ... To cast streaming contents to your TV: • press EXIT to watch a TV broadcast • press (Home) to start another activity on TV • press SOURCES to open the Sources menu and select a connected device.
5.7. Other Device CAM with Smart Card - CI+ About CI+ This TV is ready for the CI+ Conditional Access. With CI+ you can watch premium HD programmes, like movies and sports, offered by digital TV operators in your region. These programmes are scrambled by the TV operator and descrambled with a prepaid CI+ module. Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes.
Select a Device 5.8. Bluetooth® To select a wireless device: 1 - Select (Home) > Settings > Wireless & Networks and press OK. 2 - Select Bluetooth > Bluetooth devices and press OK. 3 - In the list, select the wireless device and press OK. 4 - Press (left) repeatedly if necessary, to close the menu. What You Need You can connect a wireless device with Bluetooth® to this TV – a wireless speaker or headphones. To play the TV sound on a wireless speaker, you must pair the wireless speaker with the TV.
6. Switch Source 6.1. Source List • To open the sources menu, press SOURCES. • To switch to a connected device, select the device with the Arrow / navigation keys and press OK. • To view the technical information of the connected device you are watching, press OPTIONS and select Device info. • To close the source menu without switching to a device, press SOURCES again. 6.2.
7. Channels channels. 3 - Select Start and press OK to update channels. This can take a few minutes. 7.1. About Channels and Switch Channels (Home) > Settings > Channels > Antenna/Cable installation > Search for channels Quick reinstall 1 - Select Start now and press OK. 2 - Select Quick reinstall to install all channels again with default settings. 3 - Select Start and press OK to update channels. This can take a few minutes. To watch TV channels • Press .
If you intend to use the fast Quick method in Frequency scan to search for channels, select Automatic. The TV will use 1 of the predefined network frequencies (or HC homing channel) as used by most cable providers in your country. If you received a specific network frequency value to search for channels, select Manual. Digital: Reception Test (Home) > Settings > Channels > Antenna/Cable installation > Digital: reception test The digital frequency is shown for this channel.
channels list but also in the New channels list. Empty channels are removed. If new channels are found or if channels are updated or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels.
Operator Apps Copy a Channel List, Check Channel List Version HD+ OpApp Copy a channel list to USB flash drive To copy a channel list… HD+ OpApp 1 - Switch on the TV. This TV should have channels installed. 2 - Plug in a USB flash drive to USB 2* port. 3 - Select (Home) > Settings > Channels > Channel list copy or Satellite list Copy and press OK. 4 - Select Copy to USB and press OK. 5 - When copying is done, unplug the USB flash drive.
the installation. Select the correct country and skip the channels search. Finish the installation. When done, continue with step 2. 2 - Plug in the USB flash drive that holds the channel list of the other TV. 3 - To start the channel list upload, select (Home) > Settings > Channels > Channel List Copy or Satellite list Copy > Copy to TV and press OK. Enter your PIN code if necessary. 4 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB flash drive.
You can reset your TV unique device identifier. A new identifier will be created. HbbTV on This Channel (Home) > Settings > Channels > HbbTV settings > Clear approved app listing If you want to avoid access to HbbTV pages on a specific channel, you can block the HbbTV pages for this channel only. Allow you to clear the list of HbbTV applications that you have allowed to be launched on the TV. 1 - Tune to the channel of which you want to block the HbbTV pages.
2 - Press Channel list to open the channel list. 3 - Press OPTIONS > Search channel, and press OK to open on-screen keyboard. 4 - Use navigation keys to select a character, then press OK. 5 - Select Enter when complete the input. 6 - Press Back to close the channel list. Rename Channel 1 - Press , to switch to TV. 2 - Press Channel list to open the channel list.. 3 - Select one channel you want to rename. 4 - Press OPTIONS > Rename channel, and press OK to open on-screen keyboard.
Reorder Channels If you select On in the Subtitle menu when watching this analogue channel, subtitles will be shown if available. You can reorder — reposition — channels in the Favourite channel list (only available for certain countries). To know if a channel is analogue or digital, switch to the channel and press INFO. 1 - While watching a TV channel, press OK > OPTIONS > Select channel list. 2 - Select Antenna favourite, Cable Favourite or Satellite favourite*, and press OPTIONS.
• Text 2.5 To activate the Text 2.5 for more colours and better graphics. Streaming channels include a Channel List, Channel / Progamme Info, a TV Guide, Channel / Programme lock and Channel options, just like Antenna, Cable and Satellite channels. Text Setup Change advertising privacy settings Text language Free Streaming channels are advertisement-supported. You can change the advertising privacy settings to enable or disable relevant advertising.
8. TV Guide Update TV Guide You can update the TV guide to get the latest programmes information. 8.1. What You Need To update the TV guide, press OPTIONS and select Update TV guide*. It may take few minutes to complete the update. With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
9. Freeview Play (for UK models) 9.3. TV Guide on Freeview Play When Freeview Play* is activated, press TV GUIDE can open the TV guide, press TV GUIDE again to close. 9.1. About Freeview Play To enjoy Freeview Play*, you need to connect your TV to Internet first. Change day If the TV guide information comes from the broadcaster, you can press Channel up to view the schedule of one of the next days. Press Channel down to go back to the previous day.
10. Videos, Photos and Music View Photos 1 - Press SOURCES, select USB and press OK. 2 - Select USB Flash Drive and then select the USB device you need. 3 - Select Photo, you can press Sort to browse your photos by day, month or year. 4 - Select one of photos, and press OK to view the selected photo. • To view photos, select Photos in the menu bar, select a photo thumbnail and press OK.
Video Options 10.4. Videos When browsing video files, press OPTIONS to… List/Thumbnails View video files with list view or thumbnails view. Play Videos Subtitles Display the subtitles if available, select On, Off, or On during mute. To play a video on TV: Select Videos, and select the file name and press OK. Shuffle off, Shuffle on Play videos in sequential order, or at random. • To pause the video, press OK. Press OK again to continue. • To rewind or go fast forward, press or .
11. Open TV Setting Menus • Update software - Check for TV software update. You can press Customise to enable or disable the items from the list of Frequent settings. All settings menu: 11.1. Quick Menu and Frequent Settings Press (Home) key on the remote control will go back to the Home screen. You can access Settings menu via the settings icon at the top right corner on Home screen.
effect. • Game* - Ideal for playing games. • Monitor** - Ideal for computer application display. Original video is displaying with minimum processing. • Calman - For Calman colour Calibration Picture style option is depending on the availability of (Home) > Settings > Picture > Picture style.
adjust the HDR effect level to More details, Balanced or More brightness for each type of HDR contents. Dark Details Gamma (Home) > Settings > Picture > Contrast > Dark details > Gamma. Colour Settings (Home) > Settings > Picture > Colour. To set a non-linear setting for picture luminance and contrast. Note: Not available on some models when Ambient dark detail optimisation or Dark detail optimisation is set to On. Saturation (Home) > Settings > Picture > Colour > Saturation.
select Reset all to default. Not available for below cases: Sharpness • (Home) > Settings > Picture > AI Picture style / Picture style > Monitor • (Home) > Settings > Picture > AI Picture style / Picture style > Game Enhancement (Home) > Settings > Picture > Sharpness > Enhancement. Smoothness (Home) > Settings > Picture > Motion > Smoothness. To adjust the sharpness value of the picture. To make picture movement smooth by minimizing judder.
Screen Settings Restore Personal settings 1 - Set the sound style to Personal. 2 - Press the colour key Restore Style, and press OK. The style is restored. Picture Format (Home) > Settings > Screen > Picture format If the picture is not filling the whole screen, if black bars are showing on the top or bottom or at both sides, you can adjust the picture to fill the screen completely.
(Home) > Settings > Sound > EasyLink 2.0. channels. • Surround AI - Optimum surround effect using AI analysis. You can adjust the individual sound settings of the HDMI sound system via Frequent settings or Settings > Sound > EasyLink 2.0. This is only applicable with EasyLink 2.0 compliant HDMI sound system. To switch on the control, make sure the EasyLink 2.0 sound control menu item is set to On under General settings > EasyLink > EasyLink 2.0 sound control.
Note: Settings for Multiroom TV Audio are not available when connected to the DTS Play-Fi Headphones app or playing music from the DTS Play-Fi app. setting or select Try again to redo the calibration. 5 - When room calibration setup is successful and applied, TV shall return to the Settings menu. Now go to (Home) > Settings > Sound > Room calibration and select Apply calibration to tune the audio output from TV speakers.
(Home) > Settings > Sound > Advanced > Digital out delay To adjust the volume of TV speakers or headphones, press Volume and press the arrows (right) or (left) to select the output source you want to adjust. Press Volume + or - to adjust the volume level of selected output source. For some Home Theatre Systems you might need to adjust the audio sync delay to synchronise the audio to the video. Select Off if a sound delay is set on your Home Theatre System.
• Lumina - Ideal for watching music video • Disco - Ideal for listening to loud retro music • Rhythm - Ideal for listening to rhythmic music Brightness (Home) > Settings > Ambilight > Ambisleep > Brightness. Set the starting brightness of the Ambisleep. Follow Colour (Home) > Settings > Ambilight > Ambilight style > Follow colour Colour (Home) > Settings > Ambilight > Ambisleep > Colour. Select one of the preset colour styles.
> Duration. Aurora Set the duration (in minutes) of the Lounge light mode. Aurora App is an application that enhances ambience of the TV living space with showpieces and colourful Ambilight. Aurora make use of imageries, animation, audio and Philips signature Ambilight to augment the living area to suit your new lifestyle.
- Weather: settings for local weather forecast. - Preview: you can preview the wake up effect. Make the Connection - Wireless (Home) > Settings > Wireless & networks > Wired or Wi-Fi > Connect to network > Wireless (Wi-Fi) If TV in standby and alarm time is reached, TV shall wake up from standby. Wake-up screen fade-in, Ambilight is On, music fade-in and then show weather information with backdrop. 1 - In the list of found networks, select on your wireless network.
used with Screen Mirroring. Wireless and Network Settings View Network Settings TV network name (Home) > Settings > Wireless & networks > Wired or Wi-Fi > View network settings (Home) > Settings > Wireless & networks > Wired or Wi-Fi > TV network name You can view all current network settings here. The IP and MAC address, signal strength, speed, encryption method, etc. If you have more than one TV in your home network, you can give the TV a unique name.
Set the Switch off timer, the TV switches off automatically to save energy. The setting value Off deactivates the automatic switch off. General Settings Connection Related Settings • TV switches off if receiving a TV signal but you don't press a key on the remote control during a 4 hour period. • TV switches off if not receiving a TV signal nor a remote control command for 10 minutes.
Frequent settings or Settings > Sound > EasyLink 2.0. This is only applicable with EasyLink 2.0 compliant HDMI sound system. Logos and banner (Home) > Settings > General settings > Shop setup > Logos and banner Note: Set to display Feature logos and Promotional banner. - EasyLink might not work with devices from other brands. - The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link.
changes its refresh rate in real time according to the frame rate signal to synchronize with every picture. It is applied to reduce the lag, judder and frame tearing for better gaming experience.
Dialogue enhancement Set audio preference language (Home) > Settings > Universal access > Dialogue enhancement (Home) > Settings > Region and language > Language > Primary audio, Secondary audio Increase the intelligibility of dialogue and commentary. Only available when sound setting Clear dialogue is On and audio stream is AC-4. Digital TV channels can broadcast audio with several spoken languages for a programme. You can set a preferred primary and secondary audio language.
the value. Note: Set timer to switch off automatically when TV has no • If none of the automatic settings display the time correctly, you can set the time manually. • The Auto clock mode setting will be back to Automatic after the TV power is turned off and on again. MENU > Eco settings > No signal timer signal Your TV will switch off automatically if there is no signal available after 10/15/20 minutes.
12. Gaming Control Bar The Gaming control bar is an integrated centre for information display and setting control while playing game. It is applicable for HDMI source as long as the Picture style is set to Game/HDR Game/Dolby Vision Game. When TV auto switch to Game mode (via game detection), the TV will show a message to inform user that Game mode is enabled and the gaming control bar can be enabled via long pressing the MENU key.
13. Smart TV and Apps 13.1. Setup Smart TV The first time you open Smart TV, you need to configure your connection. Read and agree to the terms and conditions to continue. The Smart TV Home screen is your link to the Internet. You can rent movies online, read newspapers, watch videos and listen to music, also shop online, or watch TV programmes when it suits you with On-line TV. TP Vision Europe B.V.
14. Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
15. Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the key to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app. For more information about Amazon Prime Video, please visit www.primevideo.com.
16. YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app. For more information about YouTube, please visit www.youtube.com.
17. Alexa 17.3. Alexa Voice Commands 17.1. About Alexa Here are some things to try: "Alexa, what’s the weather today?" "Alexa, play a song" "Alexa, read my audiobook" "Alexa, show my to-do list" "Alexa, set 5 minutes timer" "Alexa, how big is Earth?" "Alexa, what is the news?" "Alexa, what did I miss?" Your TV supports Amazon Alexa* voice control operations. About Alexa Alexa is a cloud-based voice service available on Alexa Echo devices from Amazon and device manufacturers.
18. Google Assistant Google Assistant is available in selected languages and countries with English-UK and German-DE being supported from the start. Supported language/countries list is going to be expanded overtime. For latest language and countries support list please contact our consumer care. Your TV can work with the Google Assistant. Google Assistant allows you to use your voice to control your TV – e.g. changing volume, channels and more. Services availability depends on region.
19. Software on again. Please wait. Do not . . . • use the remote control • remove the USB memory device from the TV • press twice • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait. 19.1. Update Software Search for Updates The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.
update on the TV.
20. Environmental 20.1. European Energy Label When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes. On the label, you can find the energy efficiency class, the average power consumption of this product in use.
21. Specifications 21.4. Supported Input Resolution 21.1. Power Supported Computer/Video resolution Resolution — Refresh rate Product specifications are subject to change without notice. For more specification details of this product, see www.philips.
21.6. Multimedia Connections • USB 2.0 / USB 3.0 • Ethernet LAN RJ-45 • Wi-Fi 802.11ac, Dual Band • Bluetooth® 5.2 Supported USB file systems • FAT, NTFS Playback formats • Video Codec : AVI, MKV, HEVC, H.264/MPEG-4 AVC, MPEG1, MPEG2, MPEG4, VP9, HEVC (H.
22. Troubleshooting is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. The TV goes back to standby after showing the Philips 22.1. Tips startup screen When the TV is in standby, a Philips startup screen is displayed, then the TV returns to standby mode. This is normal behaviour. When the TV is disconnected and reconnected to the power supply, the startup screen is displayed at the next startup.
use an antenna or common antenna, select DVB-C (cable) if you use a TV cable service. • Redo the installation and check if you select the correct country and system. strength indicator of the first satellite on-screen. • Check if the settings are set to two satellites. Changing the installation settings did not solve my problem No analogue channels found during the installation • Check if the TV was connected with an antenna. Check the cable connections.
• Reset all TV settings, go to (Home) > Settings > General settings > Reinstall TV. • Check the connections of the source/input devices. Make sure that your PC uses the supported resolution and refresh rate. Poor reception If the TV picture is distorted or variable in quality, the input signal might be poor. A weak digital signal is seen as a picture that is breaking up in square blocks and freezes occasionally. Much sooner than a bad analogue signal, a bad digital signal will fall away. 22.7.
up HDMI Ultra HD. • If there are intermittent sound disruptions, make sure that output settings from the HDMI device are correct. DHCP • If the connection fails, you can check the DHCP (Dynamic Host Configuration Protocol) setting of the router. DHCP should be switched on. HDMI eARC is not working well • Make sure the HDMI cable is connected to HDMI 2. • Make sure the Ultra High-speed HDMI cable is used for eARC connection. • Only one eARC device is available at a time. 22.11.
23. Safety and Care back of the TV. Never connect the TV to the power outlet if the voltage is different. Stability Hazards 23.1. Safety This product is designed and intended for consumers and personal use in a domestic home environment, unless agreed otherwise with the manufacturer in writing. Failure to follow this recommendation or the instructions provided in the product user manual and the product supportive documentation can cause damage to the product and will void the warranty for such cases.
incorrect type. • Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types). • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
24. Terms of Use note this is not subjected to repair, exchange or refund within and/or out of the warranty period. Backlight characteristics All Philips TV have gone through stringent tests and checks before shipping to you. You can be rest assured that we place the quality of our TVs the utmost importance so that you do not suffer any viewing displeasure while watching your TV.
25. Copyrights 25.4. DTS Play-Fi 25.1. HDMI For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, Play-Fi, and the DTS Play-Fi logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. ALL RIGHTS RESERVED.
25.7. Wi-Fi Alliance The Wi-Fi CERTIFIED™ Logo is a registered trademark of Wi-Fi Alliance®. 25.8. Other Trademarks All other registered and unregistered trademarks are the property of their respective owners.
26. Open Source regardless of the platform on which their software is built, relieving them of the need to code special-case conditions to work around or take advantage of platform-specific deficiencies or features. Source: https://github.com/apache/apr 26.1. Open Source Software bind ( 9.11.36) BIND (Berkeley Internet Name Domain) is a complete, highly portable implementation of the Domain Name System (DNS) protocol. Source: https://github.
a bus daemon that does things like: - notify applications when other apps exit - start services on demand - support single-instance applications Source: https://github.com/freedesktop/dbus Efficient support for all types of audio interfaces, from consumer sound cards to professional multichannel audio interfaces. Fully modularized sound drivers. SMP and thread-safe design (PLEASE READ THIS). User space library (alsa-lib) to simplify application programming and provide higher level functionality.
below. Source: http://sourceforge.net/projects/libpng/files/ as the kernel for the GNU operating system, which was written to be a free (libre) replacement for UNIX. Source: https://www.kernel.org/ libffi (3.2.1) Compilers for high level languages generate code that follows certain conventions. These conventions are necessary, in part, for separate compilation to work. One such convention is the "calling convention".
procps (ps, top) (3.3.15) procps is the package that has a bunch of small useful utilities that give information about processes using the /proc filesystem. The package includes the programs ps, top, vmstat, w, kill, free, slabtop, and skill. Source: http://procps.sourceforge.net/index.html SQLite3 (3.36.0) SQLite is a in-process library that implements a selfcontained, serverless, zero-configuration, transactional SQL database engine.
27. Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Index A B C D Advanced Ambilight Settings Advanced Sound Settings AI Equalizer Alexa Alexa Ambient Light Level Optimisation Ambilight Ambilight Style Ambilight, Custom Colour Ambisleep App lock Audio Language Audio Out Menu Aurora Auto Clock Mode Auto Film Picture style Automatic software update 40 37 35 53 53 32 38 38 39 39 46 46 37 40 46 32 55 Backlight Contrast Black Level Bluetooth® Bluetooth®, Devices Bluetooth®, Pairing Bluetooth®, Remove device Bluetooth®, Select device 32 33 16 16 16 16 16 C
P Q R S T Network Settings Menu No signal timer 42 43 Pair Your Remote Control Parental Rating Philips Smart TV App Photos, Videos and Music Picture Clean, Artefact Reduction Picture Clean, Noise Reduction Picture Contrast Menu Picture Contrast Mode Picture Format Picture Motion Picture Motion Style Picture Style Picture, Sharpness Power and Energy Power-on behaviour Privacy settings Problems 8 46 14 29 34 34 32 32 35 34 34 31 34 43 43 42 60 Quick menu Quick Picture Settings 31 34 Reception Regist
Powered by TCPDF (www.tcpdf.
