User manual

WAP 75
3. Back to the Edit Homepage menu, press - to
move to the address field and proceed the same
way to change the address.
Select Profile
This menu allows you to select one of the available
profiles, and to then define the connection settings for
each of them: scroll
+ or - to choose the profile
of your choice, then press
< or > to select /
deselect it and press
, to confirm.
All connection settings described below will apply to
the selected profile, which you can then rename for
easier identification.
Connection
Select connection
Allows you to select one of the data profiles you have
defined in
Settings > Access settings (see page 38 for
detailed information on this subject).
In the list that appears, select the connection setting of
your choice and press
, to confirm.
Bearer
Allows you to select the type of network used by the
selected profile when launching a connection.
GSM or GPRS : your mobile will only use the GSM or
the GPRS network for WAP connections.
GPRS first : your mobile will first try to connect to the
GPRS network, then to the GSM network if the
GPRS network isn’t available when connecting.
Selecting this option requires you to have configured
both GSM and GPRS settings. See page 38 for details.
Proxy address
Allows you to specify a proxy gateway address to be
used when launching a WAP connection using the
selected profile. Press
, and enter the address of
your choice, then press
, to confirm.
Press and hold 0 to enter a dot «.»
Proxy port
Allows you to specify a proxy port number, in case the
proxy you are using requires a different port number.
Press
, and enter the number of your choice, then
press
, to confirm.
Security
Certificates
Select this menu and press , to display the list of
installed security certificates. Select one of the items in
the list and press
, to display its details or delete it.