User manual

4Getting started
1. Once the battery and battery cover are clipped
on the phone, plug the charger (supplied with
the phone, in the box) into the right hand socket
at the base of the phone as shown below.
2. Plug the transformer unit into a main AC power
socket with easy access. The battery symbol
indicates the state of charge:
• During charging the 4 charge indicators change;
Each bar represents around 25% of charge and it
takes around 2.15 hours to fully recharge your
mobile phone.
•
When all 4 bars are steady the battery is fully
charged and you can disconnect the charger
.
• When the battery is charged, remove the
connector by pressing the release button on top
of the connector.
• Depending on the network and condition of use,
talk time goes up to 4 hours and standby time up
to 400 hours.
Keeping the charger plugged to the mobile when the
battery is fully charged doesn’t damage the battery.
The only way to turn off the charger is to unplug it, so
use an easily accessible AC power socket. You can
connect the charger to an IT supply (Belgium only).
3. If you don’t intend to use your phone for several
days, we recommend you to disconnect the
battery.
You can use the phone while it is on charge. If the
battery is completely flat, the battery icon will only
reappear after 2 or 3 minutes of charging.