Register your product and get support at www.philips.
Contents 1 2 3 4 5 EN Important 3 Safety Care Legal Sustainability Help and support 3 5 6 8 10 Use your TV 11 TV controls Watch TV View programme guide Watch 3D Play multimedia files Smart TV Interactive TV 11 13 16 18 19 22 24 Use more of your TV 26 Pause TV Record TV shows Use Skype™ Play games View Text Set locks and timers 26 27 30 33 34 35 Change your TV settings 37 Picture and sound Channels Satellite settings Language settings Universal access settings Other settings Update softwa
Safety Precautions Read and understand all instructions before you use your TV. If damage is caused by failure to follow the instructions, the warranty does not apply. Risk of electric shock or fire! Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilled on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Risk of injury to children! Follow these precautions to prevent the TV from toppling over and causing injury to children: Never place the TV on a surface covered by a cloth or other material that can be pulled away. Ensure that no part of the TV hangs over the edge of the surface. Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support. Educate children about the dangers of climbing on furniture to reach the TV.
Screen Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object. Unplug the TV before cleaning. Clean the TV and frame with a soft damp cloth and wipe gently. Never use substances such as alcohol, chemicals or household cleaners on the TV. To avoid deformations and colour fading, wipe off water drops as soon as possible. Avoid stationary images as much as possible. Stationary images are images that remain onscreen for extended periods of time.
Legal Notice 2013 © TP Vision Netherlands B.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
This product contains software licensed under an open-source licence. For acknowledgments and licence texts, please refer to the electronic in-product user manual. TP Vision Netherlands B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences.
PlayReady Final Products Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content.
Power management: An advanced power management helps save the energy consumed by this TV. To view how your personalised TV settings affect the TV's relative power consumption, press , then select [Setup] > [Watch demos] > [Active Control demo]. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste.
Help and support Use Help To access the onscreen [Help] menu, press the Blue button. To exit from the [Help] menu, press . Visit the Philips website If you can't find what you need in the onscreen [Help], visit the Philips support website at www.philips.com/support.
TV controls Rear controls 1. Standby indicator LED and remote control sensor The standby LED indicates when your TV is in standby. Point the remote control at the sensor. Make sure that the line of sight between the remote control and the TV is not blocked. Remote control 1. (Standby): Switch the TV on or off. 2. CH +/-: Switch to the next or previous channel. 3. (SOURCE): Watch a connected device. 4. +/- (Volume): Increase or decrease volume. 1. (Standby): Switch the TV on or to standby. 2.
EasyLink controls If you connect your TV to HDMI-CEC enabled devices, such as a Blu-ray player or home theatre, you can control them at the same time with one remote control. Simply switch on EasyLink after connection. Read more about Easylink in Connect your TV > Set up Easylink devices > Control devices (Page 59). 10. LIST: Access the TV channel list. 11. FORMAT: Change the picture format to suit the video source. 12. INFO: Display information about current activity. 13.
Switch TV on or off Automatic switch off You can save energy with this TV's energy efficiency settings, which are enabled by default. If there is no user interaction (such as pressing a remote control button or a control on the TV) for four hours, the TV will automatically switch to standby. To disable automatic switch off 1. While you watch TV, press the Green button on the remote control. 2. Select [Auto switch off], then press OK. 3. Use the Navigation buttons to make a selection, then press OK.
Switch TV channels Press CH +/- on the remote control or TV. Press the Numeric buttons on the remote control to enter a channel number. Manage favourite channels You can view all channels or only a list of your favourite channels. Create a list of your favourite channels 1. Press LIST. The channel list is displayed. 2. Select the channel to mark as favourite, then press OPTIONS. 3. Select [Add/remove favourites], then press OK. The selected channel is marked with an asterisk.
4. Select the channel to reorder, then press OK. 5. Press the Navigation buttons to move the highlighted channel to another location, then press OK. 6. Once complete, press OPTIONS. 7. Select [Exit reorder], then press OK. Note: The reordering options may vary according to your broadcaster. Lock a channel You can prevent unauthorised access to channels by locking them. 1. While you watch TV, press LIST. The channel list is displayed. 2. Select the channel to lock, then press OPTIONS. 3.
Select your preferred sound settings 1. While you watch TV, press OPTIONS. 2. Select [Picture and sound] > [Sound style], then press OK. 3. Select an option, then press OK: [Personal]: Apply your personalised sound settings. [Original]: Settings that suit most environments and types of audio. [Movie]: Ideal settings for movies. [Music]: Ideal settings for listening to music. [Game]: Ideal settings for games. [News]: Ideal settings for spoken audio, such as the news.
From the Internet Make sure that your TV is connected to the Internet through a high-speed broadband connection. See Connect your TV > Connect to a network and the Internet (Page 61). Select Internet programme guide Before you use the programme guide, check the following settings: 1. Press . 2. Select [Setup] > [TV settings] > [General settings] > [TV guide]. 3. Select [From the Internet], then press OK. Access Internet programme guide 1. Press . 2. Select [TV guide], then press OK.
Watch 3D What you need Your TV is a 3D TV. Before you watch 3D, read the health warning information in Important > Safety > 3D health warning (Page 4). To watch 3D on this TV, use the Philips Easy 3D passive glasses supplied with your TV. Note: If you need additional glasses, purchase the Philips Easy 3D glasses, PTA417. 3D glasses from other brands may reduce or lose the 3D effect. Some 3D formats are not supported.
Convert 2D to 3D You can convert any 2D programme to watch it in 3D. 1. Press OPTIONS. 2. Select [Picture and sound] > [3D settings] > [2D to 3D conversion]. To adjust the 3D depth: 1. Press OPTIONS. 2. Select [Picture and sound] > [3D effect]. 3. Select an option, then press OK. To switch off 2D to 3D conversion: 1. Press OPTIONS. 2. Select [Picture and sound] > [3D settings] > [2D], then press OK. Note: If you switch to another activity, the conversion stops.
Play files 1. Press SOURCE. 2. Select [Browse network], then press OK. 3. Select a file from the content browser, then press OK to start play. 4. Press the Play buttons to control play. 5. Optional: To select a different media server, select [Media server]. Tips: Select the top bar to filter your files by type. Select [Sort] to arrange the files by album name, artist or other fields. To clear the list of offline media servers, press OPTIONS, then select [Clear offline servers] and press OK.
Slideshow options While you play a slideshow, press OPTIONS, then press OK to select an option: [Shuffle off] / [Shuffle on]: Enable or disable random display of pictures in the slideshow. [Repeat]: Select [Repeat] to watch a slideshow repeatedly or [Play once] to watch once. [Slideshow time]: Select the display time for each photo in the slideshow. [Slideshow transitions]: Select the transition from one photo to the next.
Play DivX® VOD (Video On Demand) Smart TV This TV is DivX Certified(R) and plays high-quality DivX Video-On-Demand videos. To play DivX VOD videos from a video store or from your computer, you must first activate DivX VOD on the TV. The DivX VOD activation of your TV is free of charge. Register the TV If the TV is not yet activated when you start the playback of a rental DivX video, the TV displays the DivX registration code to activate this TV. What you can do To register, follow these steps. 1.
Access Smart TV apps 1. On your home network, connect the TV to the Internet. 2. On your TV, configure Smart TV. 3. Optional: On your PC, register with Philips to enjoy exclusive benefits and receive updates on product information. You can register at any time. You can access apps through the Smart TV home page. The icons on this page represent the apps installed on your TV. To access an app, select the app, then press OK to confirm. Add apps 1. Select [App Gallery], then press OK. 2.
View security info To view security information about a page, press OPTIONS, then select [Security info]. Interactive TV Smart TV options With interactive TV, you can view additional information or entertainment pages provided by digital TV broadcasters. You can experience true interactivity by responding directly to the digital content. Note: You cannot download files to your TV with this feature.
Access interactive TV English You can identify channels that offer interactive services by a message that invites you to press the Red button or OK to access an interactive programme. 1. Switch to a digital channel with interactive services. While the application is loading, a blinking symbol is displayed. When the application has loaded, an icon is displayed. 2. Press the Red button or OK to launch the interactive application. 3.
3 Use more of your TV Pause TV What you can do While you watch a digital channel, you can pause a programme to answer a phone call or to have a break. The broadcast is stored on a USB hard drive that is connected to the TV. You can resume playback of the programme at any time. Note: You can pause a programme for a maximum of 90 minutes. The USB hard drive is formatted exclusively for this TV. Keep it permanently connected to the TV.
Record TV shows English Pause a live TV broadcast What you can do If your TV can receive programme guides, you can record TV programmes onto a USB hard drive. You can record both current TV programmes as well as future TV programmes. Note: Recording is only supported in countries with programme guides. In Nordic countries, the TV provides limited support for subtitles while recording TV programmes. What you need 1. On a digital channel, press to pause a TV programme. 2. Press to continue watching.
Do not overload the USB port. If you connect a USB hard drive device that consumes more than 500mA power, make sure that it is connected to its own external power supply. Note: Make sure that the TV and the USB hard drive are switched off. While you are formatting the USB hard drive, do not connect other USB devices to the TV. 1. Connect the USB hard drive directly to the TV, or if you intend to connect other USB devices in future, connect the USB hard drive through a USB hub. 2.
Watch recordings 1. Press . 2. Select [Recordings], then press OK. A list of recordings is displayed. 3. Select a recording from the list, then press OK. The recording starts to play. Sort recordings 1. Press . 2. Select [Recordings], then press OK. A list of recordings is displayed. 3. Press OPTIONS. 4. Select an option to sort by name, date, expiry date or type, then press OK.
Use Skype™ What you can do Talk to anyone else on Skype, anywhere in the world, for free. Make low-cost calls to phones and mobiles. A Skype subscription is required. Visit www.skype.com. Participate in conference calls. Send and receive voicemails. Forward a call. Manage your online status, 'mood' message and profile information. Note: No emergency calls with Skype. Skype is not a replacement for your telephone and cannot be used for emergency calls.
You can add and view contacts that are online or offline. You can also block or unblock a selected contact. Add a contact 1. In the Skype menu, select [Contacts], then press OK. 2. Press OPTIONS, then select [Add Skype contact] or [Add SkypeOut Contact]. 3. Press OK to display the onscreen keyboard. 4. Follow the on-screen instructions to enter the details. A list of profiles is displayed. 5. Select a contact, then press OK. An invitation request is sent to the contact.
Full-screen view If your contact has a camera connected and accepts the call, you can see the person on your TV, in full screen. To check what your contact can see, view the display in the small screen on your TV. 1. During the call, press OPTIONS. 2. Select [Full view], then press OK. Zoom and pan your video 1. In [Full view], select [Zoom]+/- to zoom in or zoom out. A zoom and pan icon appears above the video display. 2. Use the Navigation buttons on the remote control to pan or tilt the camera.
If someone calls you on Skype and you are offline, they can leave a voice message in your Skype voicemail. Before you can receive voicemail, you need to activate voicemail in your Skype account – this can only be done on your computer. Play voicemail 1. In the Skype menu, select [History] and press OK. 2. Select [Voicemails], then press OK. 3. Select the voicemail, then press OK to play it. Delete voicemails 1. Select the voicemail from the list and press OPTIONS. 2.
5. Press OPTIONS on the TV remote control. 6. Select [Picture and sound] > [Two-player gaming]. 7. Select [Top / bottom] or [Side by side], then press OK. 8. Switch on the two-player glasses, press the player selection switch, and then put them on. (See the user manual for the two-player gaming glasses). Tips: To view game menus or scores, press OK to switch viewing mode. Game settings Picture setting for games You can optimise the TV display for gaming without picture lag. 1. Press . 2.
For digital TV channels where the broadcasters provide different text languages, you can select your preferred primary and secondary languages. 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings]. 3. Select [Languages] > [Primary Text] or [Secondary Text]. 4. Select a language, then press OK. Subpages If the text page contains several subpages, you can view each subpage in succession. These subpages are shown on a bar next to the main page number. Press or to select them.
Set the clock manually You can set the date and time manually. Before you start, set the clock mode to [Manual]. 1. In the [Clock] menu, select [Date] or [Time], then press OK. 2. Set the time or date with the Navigation buttons. 3. Select [Done], then press OK. Sleep timer You can switch the TV to standby after a specified time. During the countdown to the specified time, you can switch off your TV earlier or reset the sleep timer. 1. Press . 2.
Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound settings], then press OK. 3. Select [Continue], then press OK. 4. Follow the onscreen instructions to choose your preferred settings. More picture settings You can change the settings in the Picture menu. 1. Press . 2.
[Format and edges]: Access advanced settings to control the display format of the picture. - [Picture format]: Change the picture format. - [Screen edges]: Change the picture size. - [Picture shift]: If available, move the position of the picture. More sound settings You can change the settings in the Sound menu. 1. Press . 2. Select [Setup] > [TV settings] > [Sound], then press OK. 3. Select a setting to change, then press OK. [Sound style]: Access predefined sound settings.
Install analogue channels You can restore the default picture and sound settings, while the channel installation settings remain the same. 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > [General settings] > [Factory settings], then press OK. 3. Select [Reset], then press OK. You can search and store analogue TV channels one by one. Step 1: Select your system Note: Skip this step if your system settings are correct. 1. While you watch TV, press . 2.
Fine-tune analogue channels If the reception of an analogue TV channel is poor, you can fine-tune the TV channel. 1. Press . 2. Select [Setup] > [Channel settings] > [Channel installation]. 3. Select [Analogue: Manual installation] > [Fine tune], then press OK. 4. Press or to fine-tune the channel. 5. When you have selected the correct channel frequency, select [Done], then press OK. 6. Select an option, then press OK. [Store current channel]: Store the channel under the current channel number.
9. Press . 10. Select [Setup] > [Channel settings] or [Satellite settings]. 11. Select [Channel installation] > [Copy channel list] > [Copy to TV], then press OK. The channel list is copied to the second TV. 12. Disconnect the USB storage device. Step 3: Copy channels to a TV with no channels installed 1. Switch on the second TV, on which you want to copy the channel list. Initial installation starts. 2.
[3 or 4 satellites (DiSEqC 1.0)]: Select for 3 or 4 LNBs. [Unicable for 1 satellite]: Select if you have a Unicable setup with 1 satellite. [Unicable for 2 satellites]: Select if you have a Unicable setup with 2 satellite. Manual installation If a transponder is skipped during installation, you can test the signal strength of a transponder or add a new transponder. 1. While you watch TV, press . 2. Select [Setup] > [Search for satellite] > [Manual installation], then press OK. 3. Select the LNB. 4.
Menu language 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > [General settings] > [Menu language]. 3. Select a menu language from the list, then press OK. Audio language If the TV channel broadcasts multiple or dual audio languages, you can select your preferred audio language. 1. While you watch TV, press OPTIONS. 2. For digital channels, select [Audio language]. For analogue channels, select [Dual I-II]. Press OK to confirm your selection. 3.
Universal access settings Switch on Some digital TV broadcasters provide special audio and subtitle features for people who are hearing or visually impaired. You can switch these features on or off. 1. Press . 2. Select [Setup] > [TV settings] > [General settings]. 3. Select [Universal access] > [On] or [Off], then press OK. Set audio feedback When you press a button on the remote control or TV, you can set the TV to play a beep. 1. While you watch TV, press OPTIONS. 2.
TV demo You can watch a demo to find out more about the features on this TV. 1. While you watch TV, press . 2. Select [Setup] > [Watch demos], then press OK. 3. Select a demo, then press OK. Home mode Some TV settings may not be available in Shop mode. To make sure that the correct TV settings are applied, set the TV to Home mode. 1. While you watch TV, press . 2. Select [Setup], then press OK. 3. Select [TV settings] > [General settings] > [Location]. 4. Select [Home] or [Shop], then press OK. 5.
Upgrade the TV software Caution: Do not switch off the TV or remove the USB flash drive during the software upgrade. If a power failure occurs during the upgrade, do not remove the USB flash drive from the TV. The TV continues the upgrade as soon as power is restored. If an error occurs during the upgrade, retry the upgrade from the beginning. If the error reoccurs, contact Philips Consumer Care. 1. Remove all USB devices such as a Wi-Fi adapter from the TV, then switch on the TV. 2.
About cables Cable quality Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality connectors transfer picture and sound better. The connections shown in this user manual are recommendations only. Other solutions are possible. For more examples, visit http://www.connectivityguide.philips.com.
Connect antenna Connect the antenna to the TV. Connect devices Blu-ray or DVD disc player Connect the disc player to the TV with an HDMI cable. Connect the disc player to the TV with a component video cable (Y Pb Pr) and an audio L/R cable.
TV receiver English Connect the satellite* or digital TV receiver to the TV with an antenna cable. *For certain models only. Connect the satellite or digital TV receiver to the TV with an HDMI cable. Connect the digital TV receiver to the TV with a component video cable (Y Pb Pr) and an audio L/R cable.
Connect the digital TV receiver to the TV with a SCART cable. Video recorder Connect the recorder to the TV with an antenna cable. Connect the recorder to the TV with an HDMI cable.
English Connect the recorder to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the recorder to the TV with a SCART cable. Game console Connect the game console to the TV with an HDMI cable.
Connect the game console to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Home theatre Connect an HDMI-ARC compliant home theatre to the TV with an HDMI cable. Connect the home theatre to the TV with an HDMI cable and a coaxial audio cable.
English Connect the home theatre to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the home theatre to the TV with a SCART cable. Digital camera Connect the digital camera to the TV with a USB cable.
Digital camcorder Connect the digital camcorder to the TV with an HDMI cable. Connect the digital camcorder to the TV with a component video cable (Y Pb Pr) and an audio L/R cable.
English Connect more devices USB storage device Connect the USB hard drive to the TV with a USB cable. Connect the USB flash drive with a USB cable to the TV.
Computer Connect the computer to the TV with an HDMI cable. Connect the computer to the TV with a DVI-HDMI cable and an audio cable. Video call camera Connect the Philips TV video camera - PTA317 (sold separately) with a USB cable to the TV.
USB keyboard You can connect a USB keyboard to enter text such as device names on the TV or text for Smart TV apps. USB mouse You can connect a USB mouse to navigate pages on the Internet and click on links. Note: If you need extra USB connectors, use a USB hub. You can also connect the USB mouse to a connected USB keyboard. Connect the keyboard and mouse to the TV with a USB cable. When the TV detects the keyboard, you can select the keyboard layout and test your selection.
Watch connected devices Select a device Before you can watch a device, connect the device to the TV. See Connect your TV > Connect devices (Page 48). Select a device with SOURCE 1. Press SOURCE. 2. Select a device, then press OK. Select a device from Home menu 1. Press . 2. Select [Source], then press OK. 3. Select a device, then press OK. Update the source list If you add or remove a device, update the source list. 1. Press SOURCE. 2. Press OPTIONS. 3. Select [Scan connections], then press OK. 4.
What you need Connect an HDMI-CEC compliant device to the TV. You can connect more than one HDMI-CEC device. See Connect your TV > Connect devices (Page 48). Configure each HDMI-CEC compliant device properly. Switch on EasyLink. Switch on EasyLink 1. Press . 2. Select [Setup] > [TV settings] > [General settings] > [EasyLink]. 3. Select [EasyLink] > [On], then press OK.
Select speaker output If a connected device is HDMI Audio Return Channel (HDMI ARC) compliant, you can output TV audio through an HDMI cable. Additional audio cables are not required. Make sure you connect the device to the HDMI ARC connector on the TV. See Connect your TV > About cables > HDMI (Page 47). Switch on HDMI ARC 1. Press . 2. Select [Setup] > [TV settings] > [Sound] > [Advanced] > [HDMI 1 - ARC]. 3. Select one of the following, then press OK.
Connect English Connect to a network and the Internet What you can do View Media If you connect the TV to a home network, you can play photos, music and videos from your computer. See Use your TV > Play multimedia files (Page 19). Smart TV If you connect the TV to a home network with an Internet connection, you can browse Smart TV. Smart TV offers Internet services and websites tailored to your TV. Play music and videos, consult infotainment, rent movies and much more. See Use your TV > Smart TV (Page 22).
WiFi integrated This section is only applicable for WiFi-integrated TVs. You can connect your TV to your home network wirelessly. Note: The wireless network operates in the same 2.4 GHz frequency spectrum as common household devices, such as Dect phones, microwave ovens or Bluetooth devices, which can cause WiFi interference. Move these devices away from the TV. For optimum WiFi performance, place the TV at a distance of less than 10 m from the wireless router.
Network settings TV network name If you have more than one TV in your home network, you can rename this TV to give it a unique name. 1. Press . 2. Select [Setup] > [Network settings] > [TV network name], then press OK. 3. Use the onscreen keyboard or the remote control keypad to enter the name. Switch on Miracast This TV is a Miracast-certified TV. To seamlessly display content from a Wi-Fi device on your TV, switch on Miracast. Note: Miracast only works with certain mobile devices. 1. Press . 2.
Connect a CAM (Conditional Access Module) What you can do You can watch scrambled digital TV channels with a Conditional Access Module (CAM). Once you have inserted the CAM and paid the subscription fees, you can watch the programmes. This TV supports CI (Common Interface) as well as CI+. CI+ supports premium HD digital programmes with a high level of copy protection. Note: The applications, functions, content and onscreen messages depend on the CAM service provider.
General issues The TV does not switch on: Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. Make sure that the power cable is securely connected. When you are turning the TV on, off or to standby, you hear a creaking sound from the TV chassis: No action is required. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance.
Channel issues You want to install TV channels: See Change your TV settings > Automatic installation (Page 39) for instructions on installing analogue or digital channels. If you want to install satellite TV channels, see Change your TV settings > Satellite settings (Page 41). No digital channels were found during the installation: See the technical specifications to make sure that your TV supports DVB-T, DVB-C or DVB-S in your country.
Connection issues There is a picture but sound quality is poor: If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. Make sure that all cables are properly connected. Make sure that the volume is not muted or set to zero. Make sure that the TV speaker setting is selected. Press OPTIONS, select [Picture and sound] > [Speakers], then select [TV].
Network issues Contact Philips You want to establish a wireless connection between your TV and home network: Refer to Connect your TV > Connect to a network and the Internet > Wi-Fi integrated (Page 62) for instructions on how to connect your TV to your home network wirelessly. Smart TV does not work: Check that the router is properly connected to the TV and that your router has open access to the Internet.
Power and reception Product specifications are subject to change without notice. Power Mains power: AC 220-240 V (50-60 Hz) Standby power consumption: < 0.3 W Ambient temperature: 5 to 40 degree Celsius For power consumption, see the product specifications at www.philips.com/support. The power rating stated on the product typeplate is the power consumption for this product during normal household use (IEC 62087 Ed.2).
Multimedia Note: Multimedia file names must not exceed 128 characters. Supported multimedia connections USB: Connect only those USB devices that consume 500 mA of power or less. - NTFS, FAT 16 (Read only) - FAT 32 Ethernet LAN RJ-45 Supported audio/video formats Supported audio/video formats Supported audio/video formats EN 70 Supported image files JPEG: *.jpg, *.jpeg, *.mpo GIF (87a, 89a): *.gif PNG: *.png BMP: *.bmp, *.dib JPS: *.jps PNS: *.pns BMS: *.
English Supported audio/video formats Supported audio/video formats Supported audio/video formats Supported audio formats EN 71
Supported audio formats Supported subtitle formats Character encoding Windows-1250 (CP-1250): Central Europe and Eastern Europe Latin (Czech, Hungarian, Polish, Slovak, Slovenian, Croatian, Romanian, Serbian) Windows-1251 (CP-1251): Cyrillic Windows-1252 (CP-1252): Western Europe Latin Windows-1253 (CP-1253): Greek Windows-1254 (CP-1254): Turkish UTF-8: Multi-byte character encoding for Unicode Supported DLNA-compliant media server software Windows Media Player (Microsoft Windows) Twonky M
8 Index channels, rename - 14 3 channels, switch - 14 3D - 18 3D glasses, care - 5 3D, 2D to 3D - 19 3D, change format - 18 3D, health warning - 4 3D, start - 18 3D, switch off - 18 A amplifier, select output - 60 analogue channels, fine-tune - 40 analogue channels, install - 39 analogue channels, subtitles - 43 audio language - 43 auto subtitle shift - 60 Auto switch off, devices - 59 English channels, sort - 14 channels, update - 40 child lock - 36 CI - 64 clock - 35 codecs, supported - 70 Common I
D H demo - 45 HbbTV - 24 devices, watch - 58 HDMI - 47 digital camcorder - 54 HDMI ARC - 47 digital camera - 53 hearing-impaired access - 44 digital channels, install - 39 help, onscreen - 10 digital channels, subtitles - 43 Help, version - 72 digital radio - 14 home mode - 45 disc player, connect - 48 home network - 61 display resolutions - 69 home theatre, connect - 52 display specifications - 69 DivX VOD - 22 I DLNA - 19 install channels, automatic - 39 DTVi - 24 Interactive TV -
online forum - 10 online video, rent - 24 P parental rating - 36 pause TV - 26 pause TV, USB hard drive - 26 PC, display resolutions - 69 Philips video camera - 56 picture format - 16 picture settings - 37 picture settings, reset - 39 Pixel Plus link - 60 placement, stand or wall - 5 placement, tips - 5 play, computer files - 19 play, USB files - 20 power specifications - 69 presets, picture and sound - 15 product support - 10 programme guide - 16 programme guide, broadcaster - 16 programme guide, Internet
software, check version - 45 software, digital update - 46 software, Internet update - 46 software, USB update - 45 sound settings - 38 sound settings, reset - 39 sound specifications - 69 source, select - 15 source, update - 58 U universal access, enable - 44 universal access, hearing impaired - 44 universal access, visually impaired - 44 update, source list - 58 USB keyboard - 57 USB mouse - 57 USB, play files - 20 standby - 13 V standby LED - 11 video call camera - 56 subtitles, analog - 43 video
All registered and unregistered trademarks are the property of their respective owners. Specifications are subject to change without notice. Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. 2013 © TP Vision Netherlands B.V. All rights reserved. www.philips.
