8558 Series Användarhandbok 43PUS8558 50PUS8558 55PUS8558 65PUS8558 Register your product and get support at www.philips.
Innehåll 8.11 Fotokamera 32 8.13 Dator 32 1 Startsida 4 1.1 Inledning 4 1.3 Google TV-läge och Basläge 4 9 Ansluta TV:n 34 9.1 Nätverk och internet 34 2 Installation 6 9.2 Google-konto 2.1 Läs säkerhetsinstruktionerna 6 10 Internet 36 2.3 Tips om placering 6 10.1 Starta internet 36 11 Källor 37 11.1 Växla till en enhet 37 12 Snabbmeny och Vanliga inställningar 38 13 Bildskärm och ljud 39 13.1 Bild 39 13.3 Ljud 42 1.2 Kontrollpanel och inställningar 1.
17.7 Spela upp din musik 63 18 Smarttelefoner och surfplattor 65 18.1 Philips TV Remote App 65 19 Spel 66 19.1 Vad du behöver 66 19.3 Spela ett spel från spelkonsol eller dator 66 19.2 Spelplattor 66 19.4 Spelkontrollfält 66 20 Netflix 67 21 Alexa 68 21.1 Om Alexa 68 22 Specifikationer 69 22.1 Miljö 69 22.3 Operativsystem 69 21.2 Använda Alexa 22.2 Effekt 22.4 Mottagning 22.5 Bildskärmstyp 22.6 Ingångsupplösning för skärm 22.7 Anslutningar 22.8 Ljud 22.
1 1.2 Startsida Kontrollpanel och inställningar 1.1 Inledning Kontrollpanel Kontrollpanelen är en sidopanel i Google TV som ger åtkomst till inställningar, enhetskontroller, aviseringar med mera. Om du vill dra nytta av fördelarna med Google-TV ansluter du TV:n till internet. Tryck på HOME på fjärrkontrollen för att visa startskärmen. Precis som på din Android-smarttelefon eller -surfplatta är startsidan TV:ns centrum.
Skillnad på startskärmen Startskärmen i basläget har bara två rader och inga flikar. Den första raden på startsidan innehåller ikonerna Titta på TV, TV-guide, Källor och Kontrollpanel för TV-funktioner. Den andra appraden innehåller alla förinstallerade appar. Kontrollpanelen i basläget innehåller inte personlig profil och kan endast utföra inställningsändringar och visa systemmeddelanden. På startskärmen i Google TV finns flera flikar, t.ex. Start, Appar, Bibliotek och Sök.
kompetens och bör endast utföras av kvalificerad personal. Väggmonteringen ska uppfylla alla säkerhetskrav som gäller för TV-apparatens vikt. Läs även igenom säkerhetsföreskrifterna innan du monterar TV:n. TP Vision Europe B.V. påtar sig inget ansvar för felaktig montering eller montering som resulterar i olyckor eller skador. 2 Installation 2.1 Läs säkerhetsinstruktionerna Läs säkerhetsinstruktionerna innan du använder TV:n.
Trots att TV:ns energiförbrukning är låg i standbyläget kan du spara energi genom att dra ur nätkabeln om du inte använder TV:n under en längre tid. Tryck på färgknappen Sökord i Hjälp och leta upp Slå på för mer information om hur du slår på eller stänger av TV:n. 2.5 Antennkabel Sätt i antennkontakten ordentligt i antennuttaget på baksidan av TV:n. Du kan ansluta din egen antenn eller en antennsignal från ett antenndistributionssystem. Använd en IEC Coax 75 Ohm RF-antennkontakt.
Gå tillbaka till att titta på TV eller avsluta ett interaktivt TV-program. Det kan dock hända att det inte fungerar på vissa appar. Beteendet beror på TV-apparna från tredje part. 3 Fjärrkontroll 3.1 Knappöversikt Övre (typ 2) Övre (typ 1) 1 – (Standby/På) Slå på TV:n eller sätt den i standbyläge. Tryck ned i tre sekunder för att starta om TV:n. 1 – (Standby/På) Slå på TV:n eller sätt den i standbyläge. Tryck ned i tre sekunder för att starta om TV:n. 2– 2– 3– Välja Ambilight-stil.
Mitten Undersida 1 – (TV-guide) /(LIST) Öppna eller stäng TV-guiden. Håll intryckt för att öppna kanallistan. 2 – (Volym) Tryck på + eller − för att justera volymnivån. 1 – OK-knapp Bekräfta ett val eller inställning. Öppna kanallistan när du tittar på TV. 3 – Sifferknappar Välja kanal direkt. 2 – (Bakåt) Gå tillbaka till föregående kanal. Återgå till föregående meny. Gå tillbaka till föregående app/webbsida. 4 – TEXT Öppna eller stänga Text/Text-TV.
Obs! röstinmatningen är klar släpper du för att starta sökningen. Det kan ta en liten stund innan resultatet visas. 3 - I listan med sökresultat kan du välja önskat alternativ. 1 - När fjärrkontrollen har gått in i ihopparningsläge börjar lysdiodringen runt mikrofonen på fjärrkontrollens framsida att blinka. 2 - Fjärrkontrollen måste hållas nära TV:n (inom 1 m) under ihopparning för att det ska fungera. 3 - Om TV:n inte startar röstsökning när du trycker på , misslyckades ihopparningen.
1 - Med TV:n påslagen trycker du på styrspaksknappen längst ner på TV:n för att ta upp den grundläggande menyn. 2 - Tryck på vänster eller höger för att välja Volym, Kanal eller Källor. Välj Demo om du vill starta en demofilm. 3 - Tryck upp eller ned för att justera volymen eller ställa in nästa eller föregående kanal. Tryck upp eller ned för att gå genom listan över källor, inklusive val av mottagare. Tryck på styrspaksknappen när du vill starta en demofilm. 4 - Menyn försvinner automatiskt.
Fullständig installation för tillgängliga kanaler, välj det ena eller det andra. TV:n installerar satellitkanalerna och radiostationerna. 9 - Om du vill lagra satellitkonfigurationen och installerade kanaler och radiostationer väljer du Avsluta. 5 Kanalinstallation 5.1 Satellitinstallation Om att installera satelliter Inställningar för satellitinstallation Upp till 4 satelliter Inställningarna för satellitinstallationen är förinställda för ditt land.
Kanalpaket Användarfrekvensband Satelliter kan erbjuda kanalpaket med kostnadsfria kanaler (free-to-air) och erbjuda ett sortiment för ett visst land. Vissa satelliter har abonnemangspaket – en samling kanaler som du betalar för. Förutom det unika användarbandnumret behöver den inbyggda satellitmottagaren frekvensen för det valda användarbandnumret. Frekvenserna står oftast bredvid användarbandnumret på en Unicableomkopplingsdosa.
8 - Tryck på (vänster) flera gånger om det behövs, för att stänga menyn. samma användarbandnummer. Vissa satellitkanaler verkar ha försvunnit från kanallistan • Om kanaler verkar ha försvunnit eller bytt plats kan det hända att sändaren har ändrat transponderplatsen för de kanalerna. Om du vill återställa kanalernas plats i kanallistan kan du prova med att uppdatera kanalpaketet. Hemtransponder och LNB I en del länder kan du justera vissa expertinställningar för hemtransponder och varje LNB.
OK. 4 - Välj Av och tryck på OK. 5 - Tryck på (vänster) för att gå tillbaka ett steg eller tryck på Bakåt för att stänga menyn. digitalkanalerna. Det kan ta några minuter. 13 - Tryck på (vänster) för att gå tillbaka ett steg eller tryck på Bakåt för att stänga menyn. I vissa länder sker den automatiska kanaluppdateringen när du tittar på TV eller när som helst när TV-apparaten är i standby.
Nätverksfrekvens Mottagningskvalitet När Nätverksfrekvensläge är inställt på Manuell kan du ange det värde för nätverksfrekvensen som du har fått från din kabel-TV-operatör. Ange värdet med hjälp av sifferknapparna. Du kan kontrollera kvaliteten och signalstyrkan för en digital kanal. Om du använder en egen antenn kan du rikta om antennen för att försöka förbättra mottagningen. Så här kontrollerar du mottagningskvaliteten på en digital kanal: Frekvenssökning 1 - Ställ in kanalen.
eller som ett nytt kanalnummer. Välj Lagra denna kanal eller Lagra som ny kanal och tryck på OK. Det nya kanalnumret visas en kort stund. 4 - Välj Kopiera till USB och tryck på OK. Du kanske blir ombedd att ange PIN-kod för Låsfunktion för att kunna kopiera kanallistan. 5 - Ta bort USB-flashminnet när kopieringen är klar. 6 - Tryck på (vänster) flera gånger om det behövs, för att stänga menyn. Du kan upprepa stegen tills du hittat alla tillgängliga analoga TV-kanaler.
2 - Anslut USB-flashminnet som innehåller kanallistan till den andra TV:n. 3 - Om du vill börja ladda upp kanallistan väljer du Inställningar > Kanaler och ingångar > Kanaler > Kopiera kanallista > Kopiera till TV och trycker på OK. Ange PIN-koden om det behövs. 4 - Ett meddelande på TV:n visar när kanallistan har kopierats till TV:n. Ta bort USB-flashminnet.
2 - Tryck på OK för att öppna den aktuella kanallistan. 3 - Håll TV-guiden intryckt för att öppna kanallistan. 4 - Tryck på Bakåt för att stänga kanallistan. 6 Kanaler 6.1 Så här väljer du en av kanallistorna: Installera kanaler Mer information finns i Hjälp. Tryck på färgknappen Sökord och leta reda på Kanal, antenninstallation eller Kanal, installation. 1 - Med en kanallista öppen på skärmen trycker du på OPTIONS. 2 - Välj Välj kanallista och tryck på OK.
1 - Tryck på . 2 - Tryck på OK för att öppna den aktuella kanallistan. 3 - Tryck på OPTIONS. 4 - Välj Välj kanallista och tryck på OK. 5 - Välj Filtrera antennkanaler eller Filtrera kabelkanaler enligt den lista du vill filtrera och tryck på OK. 6 - I menyn Alternativ väljer du det filter du vill ha och trycker på OK för att aktivera. Namnet på filtret visas som en del av kanallistans namn längst upp i kanallistan.
Kanalalternativ Undertextspråk Öppna Alternativ Föredragna undertextspråk En digital sändning kan innehålla flera undertextspråk för ett program. Du kan ställa in ett önskat primärt och sekundärt textningsspråk. Om det finns undertext på ett av de här språken visar TV:n det som du har valt. När du tittar på en kanal kan du ange några alternativ. Beroende på vilken typ av kanal du tittar på (analog eller digital) eller beroende på TV-inställningarna du har gjort, är vissa alternativ tillgängliga.
1 - Tryck på OPTIONS. 2 - Klicka på Ljudspråk och välj ett språk som tillfälligt ljud. Inställningar > Kanaler och ingångar > Kanaler > Inställningar för HbbTV och operatörsappar > HbbTV. Om du vill begränsa åtkomsten till HbbTV-sidorna för en viss kanal kan du blockera HbbTV-sidorna för den specifika kanalen. Universell åtkomst Inställningar > Kanaler och ingångar > Kanaler > Universell åtkomst.
på OK. Följande skärmar kommer från TVoperatören. eller tryck på Bakåt för att stänga menyn. 6.5 Favoritkanaler CAM-inställningar Ställ in profilnamn för installerad CI+/CAM Om favoritkanaler Inställningar > Kanaler och ingångar > Kanaler > CAM-inställningar > CAM-profilnamn. I en favoritkanallista kan du samla de kanaler du gillar. Du kan skapa 8 olika listor med favoritkanaler för enkel kanalbläddring. Du kan namnge varje favoritlista individuellt.
du kanalen dit du vill ha den. 5 - Tryck på OK för att bekräfta den nya platsen. 6 - Du kan ändra kanalernas ordning med samma metod tills du stänger Favoritlistan med knappen Bakåt. Redigera favoriter Om du vill lägga till ett sammanhängande urval kanaler i en Favoritlista på en gång kan du använda Redigera favoriter. Lägga till ett kanalurval: 6.6 1 - Öppna den favoritlista där du vill lägga till kanalurvalet. 2 - Tryck på OPTIONS , välj Redigera favoriter och tryck på OK.
Text-TV-alternativ Vad du behöver I Text/Text-TV trycker du på OPTIONS för att välja följande: Interaktiv TV är endast tillgänglig på digitala TVkanaler. För att utnyttja alla fördelar med interaktiv TV måste TV:n ha en höghastighetsanslutning (bredband) till internet. • Frys sida/Avbryt frysning av sida Starta eller stoppa den automatiska visningen av delsidor. • Dubbla bilder/Hel skärmbild Visa TV-kanalen och text-TV-sidan bredvid varandra. • T.O.P. översikt Öppna T.O.P.-text-TV.
7 Sök efter genre TV-guide 7.1 Om informationen finns tillgänglig kan du hitta schemalagda program efter genre, exempelvis filmer och sport. TV-guidedata Söka efter program per genre: 1 - Tryck på TV GUIDE. 2 - Tryck på OPTIONS. 3 - Välj Sök efter genre och tryck på OK. 4 - Välj genre och tryck på OK. En lista visas med programmen som hittas. 5 - Tryck på Bakåt för att stänga menyn. Med TV-guide kan du se en lista med aktuella och planerade TV-program på dina kanaler.
8 HDMI ARC och eARC Ansluta enheter Endast HDMI 2 på TV:n har HDMI ARC (Audio Return Channel) och HDMI eARC. 8.1 Om enheten (vanligtvis ett hemmabiosystem), en soundbar eller en AV-mottagare också har HDMI ARCanslutningen ansluter du den till HDMI 2 på TV:n. Med HDMI ARC-anslutningen behöver du inte ansluta en extra ljudkabel som överför TV-ljudet till hemmabiosystemet. HDMI ARC-anslutningen kombinerar båda signalerna.
EasyLink > EasyLink-fjärrkontroll > På. HDMI Ultra HD Slå på eller stänga av funktionen EasyLinkfjärrkontroll. Observera att du alltid kan styra volymen på anslutna HDMI CEC-kompatibla enheter oberoende av den här inställningen. Den här TV:n kan visa Ultra HD-signaler. Vissa enheter – anslutna med HDMI – känner inte igen en TV med Ultra HD och fungerar eventuellt inte eller har förvrängda bilder eller ljud.
1080 p. Vi rekommenderar att du använder en ny speldator eller konsol. Problem med HTS-ljud * Med stöd för variabel HDMI-uppdateringsfrekvens och FreeSync Premium ändrar TV:n uppdateringsfrekvensen i realtid enligt bildhastighetssignalen, utöver alla funktioner som stöds i Optimalt (automatiskt för spel), för att synkronisera med varje bild. Den används för att minska fördröjning, hackiga rörelser och screen tearing för ge en bättre spelupplevelse.
8.4 CI+ CAM med Smart Card – CI+ CI+ Den här TV:n är förberedd för CI+ Conditional Access. Med CI+ kan du titta på förstklassiga HD-program, som filmer och sportsändningar, som tillhandahålls av digital-TV-operatörer i din region. Programmen är kodade av TV-operatören och avkodas med en förbetald CI+-modul. Digital-TV-operatörerna tillhandahåller en CI+-modul (Conditional Access Module - CAM) och ett tillhörande Smart Card när du abonnerar på deras premiumprogram.
letar upp EasyLink HDMI CEC om du vill ha mer information. 8.9 8.7 Anslut USB-tangentbord Hörlurar Anslut ett USB-tangentbord (USB-HID-typ) om du vill mata in text på din TV. Du kan ansluta hörlurar till -anslutningen på baksidan av TV:n. Anslutningen är ett miniuttag på 3,5 mm. Du kan justera hörlurarnas ljudnivå separat. Använd någon av USB-anslutningarna för att ansluta. Justera volymen: Konfigurera 1 - Tryck på Volym och välj hörlursikonen med pilarna (vänster) eller (höger).
ansluten USB-enhet eller flashenhet. TV:n konverterar upplösningen till Ultra HD om fotots upplösning är högre. Du kan inte spela upp en video med högre originalupplösning än Ultra HD på någon av USBanslutningarna. TV:n identifierar enheten och öppnar en lista med dess innehåll. Om innehållslistan inte visas automatiskt trycker du på SOURCES och väljer USB. Sluta visa innehållet på USB-lagringsenheten genom att trycka på EXIT eller välja någon annan aktivitet.
stänga av VRR-funktionen på grafikkortet innan du ändrar TV:ns HDMI Ultra HD till Optimal eller Standard. TV:ns gränssnittsval Optimal eller Standard stänger av VRR-stödet i TV:n. * Användare av AMD-grafikkort bör observera följande: Om du ansluter datorn till TV:n via HDMI ska du se till att använda följande inställningar på grafikkortet för att få bästa prestanda.
upprättats. 9 Ansluta TV:n Problem 9.1 Trådlöst nätverk hittades inte eller är förvrängt • Mikrovågsugnar, DECT-telefoner och andra WiFi 802.11b/g/n/ac-enheter i närheten kan störa det trådlösa nätverket. • Se till att brandväggarna i nätverket ger åtkomst till den trådlösa TV-anslutningen. • Om det trådlösa nätverket inte fungerar ordentligt kan du försöka med den trådbundna nätverksinstallationen.
på Google på din TV. Ett Google-konto består av en epostadress och ett lösenord. Om du inte har ett Google-konto ännu kan du använda din dator eller surfplatta för att skapa ett (accounts.google.com). Om du inte loggade in vid den första TV-installationen, kan du alltid logga in senare. Nätverks- och Internet-inställningar Visa nätverksinställningar Inställningar > Nätverk och Internet > Visa nätverksinställningar.
10 Internet 10.1 Starta internet Du kan surfa på internet på din TV. Du kan visa alla internetwebbplatser på TV:n, men de flesta är inte anpassade för en TV-skärm. • Vissa insticksprogram (till exempel för att visa sidor eller video) går inte att använda för TV:n. • Det går inte att skicka eller hämta filer. • Internetsidor visas en sida i taget och i helskärmsläge. Så här startar du webbläsaren: 1 - Tryck på HOME. 2 - Välj Dina appar > WEB BROWSER (andra raden med ikoner i basläget) och tryck på OK.
11 Källor 11.1 Växla till en enhet I listan med källor kan du växla till någon av de anslutna enheterna. Du kan växla till en mottagare för att titta på TV eller öppna innehållet på en ansluten USB-lagringsenhet. Du kan växla över till dina anslutna enheter för att se program, en digital mottagare eller en Blu-ray Disc-spelare. Växla till en ansluten enhet: 1 - Tryck på SOURCES för att öppna källmenyn. 2 - Välj ett av objekten i källistan och tryck på OK. TV:n visar enhetens program eller innehåll.
12 Snabbmeny och Vanliga inställningar I Snabbmeny och Vanliga inställningar hittar du ett snabbt sätt att komma åt TV-funktioner eller inställningsmenyer. Öppna Snabbmeny/Vanliga inställningar och ett objekt: 1 - Tryck på Snabbmeny/MENU för att öppna Snabbmeny. 2 - Tryck på pilarna (vänster) eller (höger) för att växla mellan Snabbmeny och Vanliga inställningar. 3 - Välj ett objekt och tryck på OK för att öppna eller starta det.
hemmabioupplevelse. • ECO – Den mest energimedvetna inställningen. • Film – Passar utmärkt för att titta på film med ursprunglig studioeffekt. • Spel* – Passar utmärkt för att spela spel. • Bildskärm** – Perfekt för att visa datorappar. Originalvideo visas med minsta bearbetning. • Calman – För Calman–färgkalibrering. 13 Bildskärm och ljud 13.1 Bild Bildinställningar * Bildstil – spel är endast tillgängligt i HDMI-video och strömning av videoappar.
Inställningar > Skärm och ljud > Bild > Automatiskt bildstil för film > Automatisk bildstil för film. mörka omgivningsdetaljer eller Optimera mörka detaljer är inställt på På. Slå på eller av för att automatiskt identifiera filminnehåll och ange dina inställningar i Inställningar > Skärm och ljud > Bild > Automatisk bildstil för film > Föredragen bildstil för film. Nivå på svärta Inställningar > Skärm och ljud > Bild > Kontrast > Mörka detaljer > Nivå på svärta. Justera bildens nivå på svärta.
Färg Skärpa Inställningar > Skärm och ljud > Bild > Färg. Förbättring Inställningar > Skärm och ljud > Bild > Skärpa > Förbättring. Mättnad Om du vill justera skärpevärdet för bilden. Inställningar > Skärm och ljud > Bild > Färg > Mättnad. Justerar värdet för färgmättnad. Strukturförbättring Obs! Inte tillgängligt när bildstilen är Bildskärm eller HDR-bildskärm. Inställningar > Skärm och ljud > Bild > Skärpa > Strukturförbättring.
skärmen med originalformatet. Inget förlorat innehåll syns. Jämnhet Inställningar > Skärm och ljud > Bild > Rörelse > Jämnhet. Formatera bilden manuellt: 1 - Tryck på Inställningar > Skärm och ljud > Skärm > Bildformat > Avancerat, och tryck sedan på OK. 2 - Använd Flytta, Zoom och Sträck ut för att justera bilden. 3 - Eller så kan du välja Ångra för att återgå till den inställning bilden hade när du öppnade Bildformat. • Flytta – Välj på pilarna för att flytta bilden.
Ljudstil Anpassad AI-equalizer Välja en stil Inställningar > Skärm och ljud > Ljud > Ljudstil. Inställningar > Skärm och ljud > Ljud > Personliga inställningar > Anpassad AI-equalizer. Du ställer enkelt in ljudet genom att välja en förinställd inställning med ljudstil. Tryck på pil-/navigeringsknapparna för att justera nivån för AI-equalizer. • AI-läge – Det är ett perfekt format för att se på film, lyssna på musik eller spela spel.
till att DTS Play-Fi-enheten är ansluten till samma WiFi-nätverk som din TV. 3 - På Philips-TV:n öppnar du den förinstallerade DTS Play-Fi-appen och väljer Connect Speakers för att söka efter DTS Play-Fi-kompatibla enheter. 4 - När DTS Play-Fi-enheter har anslutits till din TV kan du välja dem från enhetslistan och ställa in volymen. 5 - Nu kan du börja strömma ljud från TV:n till flera DTS Play-Fi-enheter.
Växla mellan förinställda ljudstilar. Det finns perfekta format för att se på film, lyssna på musik eller annat ljudinnehåll. • Automatiskt – justera det dynamiska omfånget automatiskt. • På – optimera det dynamiska omfånget. • Av – stäng av justeringen av dynamiskt omfång. • Film – det bästa ljudformatet för att titta på film. • Musik – optimerat för att lyssna på musik. • Röst – bättre röst i dialoger. • Stadium – ljud som får det att kännas som om du befinner dig på en stor utomhusarena.
den mot TV:n under inställningsprocessen. 2 - Välj Kalibrera nu eller Kalibrera igen för att starta kalibreringen. 3 - Ett testljud spelas upp och mäts via fjärrkontrollen. Håll fjärrkontrollen och rikta den mot TV:n. Detta kan ta flera sekunder. 4 - När TV-högtalarna har kalibrerats väljer du Test för att lyssna på ljudet före och efter att TVhögtalarna har kalibrerats. Välj Verkställ för att godkänna inställningen eller välj Försök igen för att göra om kalibreringen.
Ambilight-stil Digital ljudutgångsutjämning Följ video Inställningar > Skärm och ljud > Ljudutgång > Digital ljudutgångsutjämning. Du kan ställa in Ambilight till att följa bild- eller ljuddynamiken i ett TV-program. Du kan också ställa in Ambilight så att det visar en förinställd färgstil, eller också kan du stänga av Ambilight. Justera ljudnivån för HDMI-ljudsystemet. • Välj Mer för att få starkare volym. • Välj Mindre för att få mjukare volym.
färgstil. Ambisleep Ställa in Ambilight-stil: Ambisleep simulerar solnedgång för att hjälpa dig att varva ner innan du somnar. I slutet av simuleringen ställs TV:n automatiskt i standbyläge. 1 - Tryck på AMBILIGHT. 2 - Bläddra till Följ färg. 3 - Välj stilen du vill använda och tryck på OK. 4 - Tryck på (vänster) för att gå tillbaka ett steg eller tryck på Bakåt för att stänga menyn.
Inställningar > Skärm och ljud > Ambilight > Lounge light > Aktivera i standbyläge. Justering av varm vit Aktivera så att Lounge Light-läget aktiveras när TV:n är i standbyläge. Inställningar > Skärm och ljud > Ambilight > Avancerat > Varm vit toning. Justering av varm vit ställer in och låser önskad färg för Ambilight. När Ambilight-stil > Följ färg > Varm vit är upplåst kan du ställa in och låsa vita färgvariationer för Ambilight.
Home Speakers, nätverket och högtalarlysdioderna. ska fungera på rätt sätt. Soluppgångsalarm fungerar inte när TV-klockan är inställd på manuell. Gå till inställningsmenyn och ändra klockläget till automatiskt. Larmet fungerar inte om platsen ställts in på Butik. Återställ konfiguration Inställningar > Skärm och ljud > Ambilight > Philips Wireless Home Speakers > Återställ konfiguration. Aurora Återställ aktuell konfiguration för Philips Wireless Home Speakers.
fjärrkontrollen. 5 - Om du vill stoppa appen Movies & TV trycker du på Bakåt flera gånger eller på EXIT. 14 Program * Obs: Om Google TV inte finns på raden Dina appar kan du söka i sökfältet för att Öppna eller Installera den. 14.1 Om appar Du hittar dina favoritappar på raden Dina appar på startmenyn. Mer information finns på www.support.google.com/googletv Precis som appar på smarttelefonen eller surfplattan innehåller apparna på TV-apparaten specifika funktioner för en bättre TV-upplevelse.
Ett meddelande visas om du behöver en spelplatta till ett visst spel för att kunna spela det. Betalningar Om du ska göra en betalning i Google Play på TV:n måste du lägga till en betalningsmetod – ett kreditkort (utanför USA) – till ditt Google-konto. När du köper en film eller ett TV-program kommer kreditkortet att debiteras. Så här startar eller stoppar du ett Google Play-spel: 1 - Tryck på HOME och välj fliken Appar. 2 - Välj appen Google Play Games och öppna den.
Mer information finns på www.support.google.
15 Du kan också leta efter en programuppdatering själv. System Tillgänglighet Under programuppdateringen visas ingen bild och TV:n kommer att stängas av och sättas på igen. Detta kan inträffa flera gånger. Uppdateringen kan ta några minuter. Vänta tills TV-bilden är tillbaka. Tryck inte på strömknappen på TV:n eller fjärrkontrollen under programuppdateringen. Inställningar > System > Tillgänglighet.
Om det skulle bli strömavbrott under uppdateringen får du inte ta bort USB-flashminnet från TV:n. Uppdateringen fortsätter när strömmen kommer tillbaka. Status Visa statusinformation för TV Inställningar > System > Om > Status. För att undvika en oavsiktlig uppdatering av TVprogramvaran ska du ta bort filen autorun.upg från USB-flashminnet. Så här visar du TV-status för IP-adress, enhet, MACadress, Bluetooth®-adress, serienummer med mera.
Systeminformation 15.4 Visa aktuell TV-programvaruversion: Språk 1 - Välj Inställningar > System > Om > Modell, Android TV OS-version, Säkerhetspatchnivå för Android, Kernel-version, Android TV OS-build, SWversion, Netflix ESN, Nagra enhets-ID. 2 - Versionen, versionsinformationen och det datum den skapades visas. Dessutom visas Netflix ESNnummer och annan information om det finns tillgängligt. 3 - Tryck på (vänster) flera gånger om det behövs, för att stänga menyn.
Inställningar > System > Ström och energi > Strömbeteende. • TV:n stängs av om den inte tar emot en TV-signal eller fjärrkontrollsignal på 10 minuter. • Om du använder TV:n som bildskärm eller har en digitalmottagare för att titta på TV (digitaldekoder) och inte använder TV:ns fjärrkontroll, ska du stänga av den automatiska avstängningen genom att ställa in värdet på 0. Ställ in så att TV:n står på Startskärm eller på Senaste inmatning när du slår på TV:n. 15.9 15.
ljudinställningar. 15.11 Barnlås Ställ in logotyper och banderoll Ställ in kod och Ändra kod Ställ in en ny kod eller återställ den ändrade koden Inställningar > System > Inställningar för detaljhandelsläge > Butiksinställning > Logotyper och banderoll. Inställningar > kod/Ändra kod. Ställ in för att visa Funktion för logotyper eller Kampanjbanderoll eller Av för att stänga av. System > Barnlås > Ställ in Koden för Låsfunktion används för att låsa eller låsa upp kanaler och program.
Du kan ansluta eller koppla från en trådlös Bluetooth®-enhet. Du kan också ta bort en trådlös Bluetooth®-enhet ytterligare. Om du tar bort en Bluetooth®-enhet, tas ihopparningen bort. 16 Fjärrkontroll och tillbehör Så här tar du bort Bluetooth®-enheten: 1 - Välj Inställningar > Fjärrkontroll och tillbehör. 2 - I listan väljer du en Bluetooth®-enhet. 3 - Välj Glöm om du vill ta bort Bluetooth®-enheten. 4 - Tryck på (vänster) flera gånger om det behövs, för att stänga menyn. 16.
Uppdatera programvara till fjärrkontroll Uppdatera programvara till fjärrkontroll Inställningar > Fjärrkontroll och tillbehör > Inställningar för fjärrkontroll > Uppdatera programvara för fjärrkontroll. Kontrollera tillgängliga programuppdateringar för fjärrkontrollen. Om det finns en ny programvaruuppdatering för fjärrkontrollen kan du starta programvaruuppdateringen. Sätt i nya batterier eller ladda batteriet helt och placera fjärrkontrollen inom en meter från TV:n för att uppdatera programvara.
17 17.3 Videor, foton och musik Populärast-menyn och Senast spelad-menyn Visa mest populära filer eller radera lista 1 - Tryck på SOURCES, välj USB och tryck på OK. 2 - Välj USB-enheter och välj Populärast. 3 - Välj ett filnamn och tryck på OK för att visa filer eller tryck på Radera allt för att radera listan. 17.1 Från en dator eller NAS Du kan visa dina foton eller spela upp musik och videor från en dator eller NAS (Network Attached Storage) i hemnätverket.
favorit • Inställningar för undertext – Ställ in teckenstorlek, färg, placering med mera för undertext. Spela upp en video 1 - Tryck på SOURCES, välj USB och tryck på OK. 2 - Välj USB-enheter och tryck på (höger) för att välja den USB-enhet du vill ha. 3 - När du väljer Videor och en video kan du trycka på Spela upp alla om du vill spela upp alla filer i en mapp eller tryck på Markera som favorit om du vill lägga till den valda videon i favoritmenyn – Favoriter. 17.
5 - Blanda: spela upp filer i slumpmässig ordning 6 - Repetera: spelar upp alla foton i den här mappen en gång eller kontinuerligt 7 - Stoppa musiken som spelas i bakgrunden. 8 - Ställer in hur snabbt bilderna ska växla.
17.7 Musikalternativ Spela upp din musik Bläddra bland musikfiler: Spela musik • Lista/miniatyrer – Lista eller miniatyrvy • Blanda – Spela upp filer i slumpmässig ordning. Öppna musikmappen 1 - Tryck på SOURCES, välj USB och tryck på OK. 2 - Välj USB-enheter och tryck på (höger) för att välja den USB-enhet du vill ha. 3 - När du väljer Musik kan du trycka på Mark. fav. om du vill lägga till musikmappen i favoritmenyn – Favoriter.
18 Smarttelefoner och surfplattor 18.1 Philips TV Remote App Philips TV Remote App på din smarttelefon eller surfplatta är din nya TV-kompis. Med appen kan du byta kanal och justera volymen precis som med en fjärrkontroll. Ladda ned Philips TV Remote App från din favoritappbutik i dag. Philips TV Remote App är tillgänglig för iOS och Android och är gratis. Alternativt kan du gå till Inställningar > Nätverk och internet > QR-kod för Remote-appen och trycka på OK. En QR-kod visas på TV-skärmen.
19 19.4 Spel Spelkontrollfält Spelkontrollfältet är ett integrerat centrum för informationsvisning och inställningsstyrning när du spelar spel. Den gäller för HDMI-källan så länge som Bildstil är inställd på Spel/HDR-spel/Dolby Visionspel/Bildskärm/HDR-bildskärm. 19.
20 Netflix Om du har en Netflix-prenumeration kan du använda den på TV:n. Din TV måste vara ansluten till internet. I ditt området kan det hända att Netflix bara är tillgängligt med framtida programuppdateringar. Öppna Netflix genom att trycka på för att öppna appen. Du kan öppna Netflix direkt från TV:n i standbyläge. www.netflix.com Observera för Netflix Spatial Audio En del av Netflix innehåll har en ljudeffekt för rumsligt ljud.
Avancerat > TV-styrning med Amazon Alexa för att starta konfigurationsprocessen. 2 - Du behöver en Amazon Echo-enhet och en medföljande Alexa-app (på en mobil enhet eller som webbversion) för att starta installationen. 3 - Följ instruktionerna på skärmen för att acceptera sekretesspolicyn, namnge din TV och logga in på ditt Google-konto. Google-kontot behövs för att para ihop det med Alexa-enheten. 4 - På din mobila enhet loggar du in med samma Google-konto i den medföljande appen Amazon Alexa.
22 Specifikationer 22.1 Ta reda på var du kan hitta närmaste återvinningsstation för elektriska och elektroniska produkter. Miljö Europeisk energimärkning Följ de lokala reglerna och släng inte dina gamla produkter i det vanliga hushållsavfallet. Genom att kassera dina gamla produkter på rätt sätt kan du bidra till att minska eventuella negativa effekter på miljö och hälsa. EU-energimärkningen informerar om produktens klassificering avseende energieffektivitet.
• 3840 x 2160 p - 24Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz, 120 Hz* 22.
22.8 Ljud Uteffekt (RMS): 20W Dolby MS12 V2.6 • Dolby Atmos • DTS Play-Fi • DTS:X • Virtualisering av surroundljud + virtualisering av höjd • Dolby Bass Enhancement • Dolby Dialogue Enhancement • Dolby Volume (AVL/Night Mode) • AI Sound • AI EQ • Mimi Health Hearing 22.9 Multimedia Anslutningar • USB 2.0 – USB 3.0 • Ethernet LAN RJ-45 • Wi-Fi 802.11a/b/g/n/ac, Dual Band • Bluetooth® 5.
nätverk och andra inställningar fungerar som de ska. • Uppdatera program – Sök efter tillgängliga programuppdateringar. • Användarhandbok – Läs användarhandboken för att få information om TV:n. • Kopiera inställningslista – Kopiera TVinställningarna på en USB-enhet. • Felsökning – Hitta svar på vanliga frågor. • Fabriksinställning – Återställ alla inställningar till fabriksinställningarna. • Installera om TV – Installera om och gör om hela TVinstallationen.
2 - Välj följande alternativ för att kontrollera konfigurationerna. • Kontrollera TV:n – Du kan kontrollera om bild, ljud och andra inställningar fungerar som de ska. • Kontrollera nätverket – Kontrollera nätverksanslutningen. • Kontrollera fjärrkontrollen – Utför testet för att kontrollera fjärkontrollfunktionen som ingår i TV:n. • Visa historik över svag signal – Visa listan över kanalnummer som automatiskt har sparats när signalstyrkan var svag.
Se till att din dator använder en upplösning och uppdateringsfrekvens som kan användas. Ingen volymsymbol visas • Om en HDMI-CEC-ljudenhet är ansluten och du använder TV:ns fjärrkontroll för att ändra ljudnivån från enheten, är det här beteendet normalt. Foton, videor och musik från en USB-enhet visas Ljud inte • Kontrollera att USB-lagringsenheten är inställd för att vara kompatibel med masslagringsklass, enligt beskrivningen i dokumentationen för lagringsenheten.
23.5 Bluetooth® Onlinehjälp Det går inte att para ihop • Kontrollera att enheten är i ihopparningsläge. Läs användarhandboken för enheten. • Se till att den trådlösa högtalaren är så nära TV:n som möjligt. • Det kan hända att det inte går att para ihop flera enheter med TV:n samtidigt. Om du får problem med din Philips-TV kan du besöka vår onlinesupport. Där kan du välja språk och ange produktmodellnummer. Besök www.philips.
Hantera dem med försiktighet så att personskada eller skada på TV:n undviks. 24 Säkerhet och skötsel Risk för skada på TV:n! Kontrollera att spänningen stämmer överens med värdet som anges på TV:ns baksida innan du ansluter den till elnätet. Anslut aldrig TV:n till elnätet om spänningen skiljer sig åt. 24.1 Säkerhet Stabilitetsrisker Viktigt En Tv-apparat kan falla ned och orsaka allvarliga personskador eller dödsfall.
• Om du byter batterierna mot batterier av fel typ innebär det att en säkerhetsfunktion kan åsidosättas (till exempel för vissa litiumbatterityper). • Om du kasserar batterier genom att kasta dem i en eld, stoppa in dem i en varm ugn eller krossa eller skära dem kan det leda till en explosion. • Om du lämnar batterier i extremt hög temperatur kan det leda till en explosion och till att lättantändlig vätska eller gas läcker ut.
kan svarta punkter eller starka ljusskällor (rött, grönt eller blått) visas kontinuerligt på skärmen. Detta är en strukturegenskap för skärmen (enligt vanlig branschstandard) och är inte något tekniskt fel. Du har inte rätt till reparation, byte eller återbetalning under eller efter garantiperioden på grund av detta. 25 Användningsvillkor 25.1 Användningsvillkor – TV Bakgrundsbelysningens egenskaper Philips TV-apparater har alla genomgått stränga tester och kontroller innan de skickas till dig.
1 - Tryck på HOME för att öppna startmenyn. 2 - Välj Apps för att öppna Apps.
26 Copyrights 26.1 Google TV Google TV är namnet på den här enhetens programvaruupplevelse och ett varumärke som tillhör Google LLC. Google, YouTube och andra märken är varumärken som tillhör Google LLC. 26.5 Dolby Vision och Dolby Atmos. 26.2 Dolby, Dolby Vision, Dolby Atmos och double-Dsymbolen är varumärken som tillhör Dolby Laboratories Licensing Corporation. Tillverkat med licens från Dolby Laboratories. Konfidentiella opublicerade arbeten. Copyright © 2012–2022 Dolby Laboratories. Med ensamrätt.
26.8 Wi-Fi Alliance Wi-Fi CERTIFIED™-logotypen är ett registrerat varumärke som tillhör Wi-Fi Alliance®. 26.9 Kensington (om tillgänglig) Kensington och Micro Saver är varumärken som registrerats i USA och tillhör ACCO World Corporation med utfärdade registreringar och pågående ansökningar i andra länder runt om i världen. 26.10 Andra varumärken Alla andra registrerade och oregistrerade varumärken tillhör respektive ägare.
27 Friskrivning angående tjänster och/eller programvara som erbjuds av tredje part Tjänster och/eller programvara som erbjuds av tredje parter kan ändras, upphävas eller avslutas utan föregående meddelande. TP Vision tar inget ansvar vid om sådana situationer uppstår.
Index A Alexa Alternativ i en kanal Ambient-läge Ambilight, Anpassad färg Ambilight, inställningar Ambilight-stil Ambisleep Anslutningsguide Antenn, manuell installation Användningsvillkor Aurora Automatisk bildstil för film Automatisk kanaluppdatering Avancerad färginställning Avstängningstimer Å Åldersgräns Återställ B Bakgrundsbelysningskontrast Barnlås Bild, bildformat Bild, snabbinställningar Bildskärm och ljud Bildstilar Blu-ray Disc-spelare, anslut Bluetooth®, ta bort enhet Bluetooth®, välj enhe
Menyn Bildinställningar Mottagningskvalitet MPEG-artefaktreducering N Nätkabel Nätverk, ansluta Nätverk, inställningar Nätverk, trådbundet Nätverk, trådlöst Nätverksfrekvens Nätverksfrekvensläge Nätverksinstallation Nivå för dynamisk förbättring Nivå på svärta O Onlinesupport Optimalt (automatiskt för spel) Optimering av omgivningsljusnivå P Personligt läge, Clear dialogue Personligt läge, Equalizer Philips Wireless Home Speakers med Ambilight Play-Fi trådlös hemmabio Problem, anslutning, internet Pro
Powered by TCPDF (www.tcpdf.