7009 Series User Manual 43PUS7009 50PUS7009 55PUS7009 65PUS7009 75PUS7009 Register your product and get support at www.philips.
1. Home Screen Overview to view and change to available Select sources in this TV. : If your installed country is Germany, there will be additional tab on home screen to list apps. To enjoy the bene�ts of your Smart TV, connect the TV to the Internet. Press on your remote control to get your Home screen. Like on your smartphone or tablet, the Home screen is the centre of your TV. From the Home screen you can decide what to watch by browsing entertainment options from apps.
2. Get Support You can run the TV diagnose test to check the condition of your TV. At the end of the diagnose, TV will clear the cache memory and close any unused apps to continue the smooth functioning of your TV. You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV. To run the TV diagnose test: > > and 1 - Select press . 2 - Select to run a series of diagnostic tests.
Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/TVsupport and select your country if needed. You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV. Do not attempt to repair the TV yourself. This may cause severe injury, irreparable damage to your TV or void your warranty.
3. Quick Guide Hidden keys will be appeared to extend more control functions while pressing the . The is on middle of remote control, which is used to turn on/off hidden keys mode. When hidden key mode is turned on, the 0 to 9 and will appear with backlight and trigger the functions. When hidden key mode is turned off by pressing again or automatically turned off, the remote control will work with normal keys. - To open or close the TV Guide. To con�rm a selection or setting.
is pressed. Press the quick key to launch app or streaming media directly. The actual quick keys are varied between regions or countries. To open the Home menu. Move down or up to switch to the next or previous channel in the channel list. To open the next or previous page in Text/Teletext. Press the middle of key to open the channel list. The TV can receive commands from a remote control that uses IR (infrared) to send commands.
Your remote control is treated with a scratch-resistant coating. To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.
4. Setting Up Your TV is also prepared for the wall mount bracket (sold separately). The wall mount size may vary depending on different in your type of back cases; refer to the product package to see which size is applied to your TV. Use the following wall mount dimension when purchasing the wall mount. Please read the safety instructions before you use the TV. > To read the instructions, in the colour key and look up . , press • 43PUS7009 200x200 mm, M6 (min.:6 mm, max.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. Before you switch on the TV, make sure you plugged in the mains power in the connector on the back of the TV. Press the small joystick key on the bottom of the TV. To switch the TV to standby, press on the remote control. You can also press the small joystick key on the bottom of the TV.
5. Connections Attach the satellite F-type connector to the satellite connection at the back of the TV. Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. SAT SAT TV ANTENNA 5.0V USB 1 USB 2 500mA When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish.
HDMI ports support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Management). Audio Out - Optical is a high quality sound connection. (Audio Return AUDIO OUT DIGITAL AUDIO OUT If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV.
You can stop sharing a screen from the TV or from the mobile device. The normal delay when sharing a screen with Screen Mirroring is about 1 second. The delay might be longer if you are using older devices with less processing power. With the application you use to start Screen Mirroring, you can disconnect and stop watching the screen of the device on TV. The TV will switch back to the last selected programme. The on your smartphone or tablet is your new TV buddy.
operator and descrambled with a prepaid CI+ module. Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes. These programmes have a high level of copy protection. For some CAMs, you must enter a PIN code to watch its channels. When you set the PIN code for the CAM, we recommend you to use the same code you are using to unlock the TV. Contact a digital TV operator for more information on terms & conditions.
If you connect your computer to TV via HDMI, Nvidia card may automatically output Variable Refresh Rate (VRR) video to TV when TV’s setting is or . Please always ensure to turn off VRR function in graphics card before you change TV’s to or , the TV UI selection or will turn off VRR support in TV. * Note for AMD Graphics card users: If you connect your computer to TV via HDMI, please ensure following settings in graphics card used to have proper performance.
6. Switch Source • To open the sources menu, press . • To switch to a connected device, select the device with the keys and press . • To view the technical information of the connected device you are watching, press • To close the source menu without switching to a device, press again. > > > > 1 - Select one of the device icons, the preset name appears in the typing �eld and select. 2 - Select to open on-screen keyboard. 3 - Use navigation keys to select characters.
7. Channels channels. 3 - Select and press take a few minutes. > > > to update channels. This can > 1 - Select and press . 2 - Select to install all channels again with default settings. 3 - Select and press to update channels. This can take a few minutes. • Press . The TV tunes to the TV channel you last watched. • Press > and press . • Press or to switch channels. • If you know the channel number, type in the number with the number keys. Press after you entered the number to switch channels.
If you intend to use the fast method in to search for channels, select . The TV will use 1 of the prede�ned network frequencies (or HC homing channel) as used by most cable providers in your country. If you received a speci�c network frequency value to search for channels, select . > > > > The digital frequency is shown for this channel. If the reception is poor, you can reposition your antenna. To check the signal quality of this frequency again, select and press .
> > > > channels list but also in the New channels list. Empty channels are removed. If new channels are found or if channels are updated or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels. > is set to * Only available when > • Select the group of channels you want to install. • Satellite operators can offer channel packages that bundle free channels (free-to-air) and offer a sorting that suits a country.
To copy a channel list… 1 - Switch on the TV. This TV should have channels installed. * port. 2 - Plug in a USB �ash drive to 3 - Select > > > or and press . 4 - Select and press . 5 - When copying is done, unplug the USB �ash drive. HD+ OpApp* is an app provided by HD+ for Germany users that can run a virtual set-top box on TV. The app has the applications and features that you previously needed a physical set-top box to access.
the installation. Select the correct country and skip the channels search. Finish the installation. When done, continue with step 2. 2 - Plug in the USB �ash drive that holds the channel list of the other TV. 3 - To start the channel list upload, select > > > or > and press . Enter your PIN code if necessary. 4 - The TV noti�es you if the channel list is copied to the TV successfully. Unplug the USB �ash drive.
You can reset your TV unique device identi�er. A new identi�er will be created. > If you want to avoid access to HbbTV pages on a speci�c channel, you can block the HbbTV pages for this channel only. > > > > . > > > > Only available when > > When CAM pro�le installation is done, select to enable or disable CAM Operator pro�le UI pop up message. To block HbbTV on TV completely: > > Allow you to clear the list of HbbTV applications that you have allowed to be launched on the TV.
to open the channel list. 2 - Press 3 - Press > , and press open on-screen keyboard. 4 - Use navigation keys to select a character, then press . 5 - Select when complete the input. 6 - Press to close the channel list. 1 - Press , to switch to TV. 2 - Press to open the channel list.. 3 - Select one channel you want to rename. 4 - Press > , and press to open on-screen keyboard. 5 - Use navigation keys to select characters. 6 - Select when complete the editing. 7 - Press to close the channel list.
To select a page . . . 1 - Enter the page number with the number keys. 2 - Use the arrow keys to navigate. 3 - Press a colour key to select a colour-coded subject at the bottom of the screen. You can reorder — reposition — channels in the Favourite channel list (only available for certain countries). 1 - While watching a TV channel, press > > . 2 - Select , or , and press . 3 - Select , select the channel you want to reorder, and press .
If available, Text 2.5 offers more colours and better graphics. Text 2.5 is activated as a standard factory setting. To switch off Text 2.5… 1 - Press or press and then select . 2 - With Text/Teletext open on screen, press . 3 - Select > . 4 - Press (left) repeatedly if necessary, to close the menu.
8. TV Guide You can update the TV guide to get the latest programmes information. and select To update the TV guide, press *. It may take few minutes to complete the update. With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown. Not all channels offer TV guide information. * Note: Not available when UK Freeview Play is activated.
9. Freeview Play (for UK models) To enjoy Internet �rst. When * is activated, press can open the TV guide, press to close. , you need to connect your TV to If the TV guide information comes from the broadcaster, to view the schedule of one of you can press the next days. Press to go back to the previous day. Freeview Play offers: • Watch TV programmes you missed from the last seven days.
10. Videos, Photos and Music 1 - Press , select and press . 2 - Select and then select the USB device you need. 3 - Select , you can press to browse your photos by day, month or year. 4 - Select one of photos, and press to view the selected photo. • To view photos, select in the menu bar, select a photo thumbnail and press . • If there are several photos in the same folder, select a photo and press to start a slide show of all photos in this folder.
When browsing video �les, press to… View video �les with list view or thumbnails view. To play a video on TV: Select , and select the �le name and press Display the subtitles if available, select . . • To pause the video, press . Press again to continue. • To rewind or go fast forward, press or . Press the keys several times to speed up - 2x, 4x, 8x, 16x, 32x. • To jump to the next video in a folder, press to pause and select on screen and press . • To go back to the folder, press .
11. Open TV Setting Menus Press to �nd the �nd the to the Home screen. You can access menu via the settings icon at the top right corner on Home screen. * Ambilight setting is only for models which support Ambilight function. key on the remote control , then press the arrows (Left) to . • - Diagnose and get more information about your TV. • - View all settings menu. • - To open the Sources menu. • - To launch the . • - To switch back to watch TV. • - To open the TV Guide. • - To open the channel list.
• • • • Not available on some models when or set to . To restore the style to its original setting, go > > > to press . > > > > . , then > > . > > > . > > To set the black level of picture. : Setting of black level much away from reference value (50) may result lower contrast (dark detail disappear or black picture become grey). > > Switch on to automatically reduce eye strain under different ambient light conditions. > > is > > > > .
. or to set the Select level of the colour intensity and the details in bright colours. not available when picture style is > > > . > or Select temperature for your preference. > > > > > > > • During the �rst installation, you did some picture settings in a few easy steps. You can redo these steps with menu. • Select the picture setting you prefer and go to the next setting. • To do these steps, make sure the TV can tune to a TV channel or can show a programme from a connected device.
> > > The available sound styles are: > - Select AI mode for intelligent switching of • sound style based on audio content. • - Most neutral sound setting • - Ideal for watching movies • - Ideal for listening to music • - Ideal for gaming • - Ideal for speech • - Select to adjust your preferred sound settings > > > > > , and > > > > > Press the settings. * Note: To restore the setting, select back to . > > Press the bass. > > > Press the treble. > > > .
adjust the level of AI Equaliser. The setting is only available when connected device is compatible with TV for the feature. > . > > > > • Upmix - Upmix to take full advantage of all speakers. • Standard - Speakers output follow the original channels. • Surround AI - Optimum surround effect using AI analysis. > > > > • Auto - Dynamic range is automatically adjusted. • On - Optimize the dynamic range. • Off - Turn off dynamic range adjustment.
5.1 and 7.1, and 32-channel uncompressed audio. is only available on necessary for the Home Theatre System to process the sound of the TV picture. • You can set the value in steps of 5ms. Maximum setting is 60ms. . Digital output settings are available for SPDIF output (optical) and HDMI ARC sound signals. > > > > > > Switch or the Dolby Atmos noti�cation when Dolby Atmos content begins to play on your TV.
successful. > > > > > HDMI 1 (eARC) > DIGITAL AUDIO OUT NETWORK > > > > **To ful�ll EMC regulations, use a shielded FTP Cat. 5E Ethernet cable. > > > > and con�gure the , or . > > > > > > > You can switch on or off Wi-Fi connection on your TV. If the connection fails, you can check the DHCP setting of the router. DHCP should be switched on. > > . If your media �les do not play on your TV, make sure that the Digital Media Renderer is switched on.
> > > > connect the USB keyboard to one of the USB connections on the TV. When the TV detects the keyboard for the �rst time, you can select your keyboard lay-out and test your selection. You can view the contents of Terms of use, which is displayed when you �rst time to connect your TV to the Internet. > > > > > > > > > > > > > > > > > > > screen or on > Select , the TV screen is switched off, to switch the TV screen back on, press any key (except *, or keys) on the remote control.
• If you use the TV as a monitor or use a digital receiver to watch TV (a Set-Top Box - STB) and you do not use the remote control of the TV, you should deactivate this automatic switch off, to set the value to . > > > brands. - The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink.
> > > �rst time. HDR10+ content is supported only when is set to or . > Turn On/Off the Demo Me autostart > > > > > Set to , if you want TV to automatically set to whenever it is informed by the HDMI device connected to TV. > This TV can display Ultra HD signals. Some devices connected with HDMI - do not recognise a TV with Ultra HD and might not work correctly or show distorted picture or sound.
or preference, > > > > . > > Increase the intelligibility of dialogue and commentary. Only available when sound setting is and audio stream is AC-4. > > > Enter PIN code and select , the TV will reinstall completely. All settings will be reset and installed channels will be replaced. The installation can take a few minutes. > > > > . > > > > > > > > > , > > > > > > You can lock apps unsuited for children.
• When select for , > > > > > > , or > > > > > > > > > Go to previous menu, and select the value. > , you can set the time . and to adjust : > > > • If none of the automatic settings display the time correctly, you can set the time manually. • The Auto clock mode setting will be back to Automatic after the TV power is turned off and on again. > Digital TV channels can broadcast audio with several spoken languages for a programme.
> > . Set the TV to switch to Standby automatically after a preset time. You can set the time to up to 180 minutes in , the sleep increments of 10 or 30 minutes. If set to timer is switched off. You can always switch off your TV earlier or reset the time during the countdown. > > Set the Switch off timer, the TV switches off automatically to save energy. The setting value deactivates the automatic switch off.
12. Gaming Control Bar The Gaming control bar is an integrated centre for information display and setting control while playing game. It is applicable for HDMI source as long as the is set to . When TV auto switch to Game mode (via game detection), the TV will show a message to inform user that Game mode is enabled and the gaming control bar key. can be enabled via long pressing the key to launch the gaming control Long press the bar while in mode.
13. Smart TV and Apps The �rst time you open Smart TV, you need to con�gure your connection. Read and agree to the terms and conditions to continue. The Smart TV Home screen is your link to the Internet. You can rent movies online, read newspapers, watch videos and listen to music, also shop online, or watch TV programmes when it suits you with On-line TV. TP Vision Europe B.V. bears no responsibility regarding the content and the quality of the content provided by the content service providers.
14. Net�ix If you have a Net�ix membership subscription, you can enjoy Net�ix on this TV. Your TV must be connected to the Internet. To open Net�ix, press to open the Net�ix App. You can open Net�ix immediately from a TV in standby. www.net�ix.
15. Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the key to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app. For more information about Amazon Prime Video, please visit www.primevideo.com.
16. YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app. For more information about YouTube, please visit www.youtube.com.
17. Google Assistant Google Assistant is available in selected languages and countries with English-UK and German-DE being supported from the start. Supported language/countries list is going to be expanded overtime. For latest language and countries support list please contact our consumer care. Your TV can work with the Google Assistant. Google Assistant allows you to use your voice to control your TV – e.g. changing volume, channels and more. Services availability depends on region.
18. Software > > > on again. Please wait. • use the remote control • remove the USB memory device from the TV • press twice • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait. The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg �le from the USB memory device. > Look for a software update yourself.
update on the TV.
19. Environmental Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. The informs you on the energy efficiency class of this product.
20. Speci�cations Resolution — Refresh rate Product speci�cations are subject to change without notice. For more speci�cation details of this product, see www.philips.
• Wi-Fi 802.11n, Single Band • FAT, NTFS • Video Codec : AVI, MKV, HEVC, H.264/MPEG-4 AVC, MPEG1, MPEG2, MPEG4, VP9, HEVC (H.265), AV1 • Audio Codec : MP3, WAV, AAC, FLAC • Subtitles : - Format : SRT, SMI, SSA, SUB, ASS, TXT - Character encodings : Western Europe, Turkish, Central Europe, Cyrillic, Greek, UTF-8 (Unicode), Hebrew, Arabic, Baltic • Maximum Supported Data Rate : – MPEG-4 AVC (H.264) is supported up to High Pro�le @ L5.1. 30Mbps – H.
21. Troubleshooting is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. If you can't �nd a solution for your TV problem in , you can use in > to �nd the information you are looking for. Select a keyword to go the most relevant page in the User manual. When the TV is in standby, a Philips startup screen is displayed, then the TV returns to standby mode. This is normal behaviour.
strength indicator of the �rst satellite on-screen. • Check if the settings are set to two satellites. use an antenna or common antenna, select DVB-C (cable) if you use a TV cable service. • Redo the installation and check if you select the correct country and system. All settings, satellites and channels are only stored at the end of the installation when you �nish. • Check if the TV was connected with an antenna. Check the cable connections.
• Reset all TV settings, go to > > > . • Check the connections of the source/input devices. Make sure that your PC uses the supported resolution and refresh rate. If the TV picture is distorted or variable in quality, the input signal might be poor. A weak digital signal is seen as a picture that is breaking up in square blocks and freezes occasionally. Much sooner than a bad analogue signal, a bad digital signal will fall away.
up . • If there are intermittent sound disruptions, make sure that output settings from the HDMI device are correct. • If the connection fails, you can check the DHCP (Dynamic Host Con�guration Protocol) setting of the router. DHCP should be switched on. • Check if your HDMI devices are HDMI-CEC compatible. EasyLink features only work with devices that are HDMICEC compatible. • Make sure the HDMI cable is connected to • Make sure the for eARC connection. • Only one eARC device is available at a time. .
22. Safety and Care back of the TV. Never connect the TV to the power outlet if the voltage is different. Read and understand all safety instructions before you use the TV. If damage is caused by failure to follow instructions, the warranty does not apply. This product is designed and intended for consumers and personal use in a domestic home environment, unless agreed otherwise with the manufacturer in writing.
incorrect type. • Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types). • Disposal of a battery into �re or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of �ammable liquid or gas.
23. Terms of Use note this is not subjected to repair, exchange or refund within and/or out of the warranty period. Backlight characteristics All Philips TV have gone through stringent tests and checks before shipping to you. You can be rest assured that we place the quality of our TVs the utmost importance so that you do not suffer any viewing displeasure while watching your TV.
24. Copyrights Dolby, Dolby ATMOS, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Con�dential unpublished works. Copyright © 2012–2022 Dolby Laboratories. All rights reserved. The terms HDMI, HDMI High-De�nition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
25. Open Source regardless of the platform on which their software is built, relieving them of the need to code special-case conditions to work around or take advantage of platform-speci�c de�ciencies or features. Source: https://github.com/apache/apr This television contains open source software. TP Vision Europe B.V.
a bus daemon that does things like: - notify applications when other apps exit - start services on demand - support single-instance applications Source: https://github.com/freedesktop/dbus Efficient support for all types of audio interfaces, from consumer sound cards to professional multichannel audio interfaces. Fully modularized sound drivers. SMP and thread-safe design (PLEASE READ THIS). User space library (alsa-lib) to simplify application programming and provide higher level functionality.
below. Source: http://sourceforge.net/projects/libpng/�les/ as the kernel for the GNU operating system, which was written to be a free (libre) replacement for UNIX. Source: https://www.kernel.org/ libffi (3.2.1) Compilers for high level languages generate code that follows certain conventions. These conventions are necessary, in part, for separate compilation to work. One such convention is the "calling convention".
procps (ps, top) (3.3.15) procps is the package that has a bunch of small useful utilities that give information about processes using the /proc �lesystem. The package includes the programs ps, top, vmstat, w, kill, free, slabtop, and skill. Source: http://procps.sourceforge.net/index.html SQLite3 (3.36.0) SQLite is a in-process library that implements a selfcontained, serverless, zero-con�guration, transactional SQL database engine.
26. Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
A B C D E F Advanced Sound Settings AI Equalizer Ambient Light Level Optimisation Antenna App lock Audio Language Audio Out Menu Auto Clock Mode Auto movie mode Automatic software update 35 34 32 12 41 42 35 42 40 50 Backlight Contrast Black Level 32 32 CAM PIN Channel List Channel List Copy Channel Options Channel, Channel Filter Channel, Rename Channel Channels Child Lock Child Lock, Change Code Child Lock, Set Code CI Card Clear dialogue Clear Internet Memory Clock Colour Temperature Connect Dev
R S T U V Reception Register TV Remote Control - IR Sensor Rename or replace device icon Repair Reset Settings 53 5 8 17 5 41 Safety and Care Satellite Screen Mirroring Screen Mirroring Connection Screen Off Screensaver settings Self-diagnose Shop Setup Sleep timer Smart TV Software Version Sound Menu Sound Style Sound, Auto Volume Levelling Sound, Delta Volume Source List Standby Mode Static IP Store Subtitle Language Switch Off Timer Switch On with Wi-Fi Switching On 59 12 13 13 38 39 5 39 38 45 50