6808 Series User Manual 43PFS6808 Register your product and get support at www.philips.
Contents 1 Home Screen Overview 2 Get Support 4 5 11.2 All Settings 31 12 Wireless and Networks 41 41 2.2 TV Help and User Manual 12.1 Home Network 5 12.2 Connect to Network 41 2.1 Identify and Register your TV 2.3 TV Diagnose and Self-diagnose 5 5 2.4 Consumer Care / Repair 5 3.1 Remote Control 7 3 Quick Guide 7 3.2 IR sensor 9 3.3 Batteries and Cleaning 9 3.4 Joystick - Local Control 9 4.1 Read Safety 10 4 Setting Up 10 4.2 TV Placement 10 4.3 Turn on TV 10 5.
26 Copyrights 62 26.2 HEVC Advance 62 26.1 HDMI 26.3 Dolby Audio 26.4 Wi-Fi Alliance 62 62 62 26.5 Other Trademarks 62 27.1 Open Source Software 63 27 Open Source 63 27.
1 Sources Home Screen Overview Select SOURCES to view and change to available sources in this TV. Note: If your installed country is Germany, there will be additional Public Value tab on home screen to list Featured apps. To enjoy the benefits of your Smart TV, connect the TV to the Internet. Press (Home) on your remote control to get your Home screen. Like on your smartphone or tablet, the Home screen is the centre of your TV.
** Ambilight setting is only for models which support Ambilight function. 2 Get Support 2.3 2.1 TV Diagnose and Selfdiagnose Identify and Register your TV Identify your TV - TV model number and serial number TV diagnose You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV. You can run the TV diagnose test to check the condition of your TV.
2.4 Consumer Care / Repair For support and repair, call the Consumer Care hotline in your country. Our service engineers will take care of a repair, if necessary. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/TVsupport and select your country if needed. TV model number and serial number You might be asked to provide the TV product model number and serial number.
TV application. 3 Quick Guide Top (for UK models) 3.1 Remote Control Key Overview Top 1 - Standby / On To switch the TV on or back to Standby. 2 - TV Guide To open or close the TV Guide. 3- To launch the Amazon prime video App. 1 - Standby / On To switch the TV on or back to Standby. 4- To open the Netflix App directly. With the TV switched on or from standby. 2 - TV Guide To open or close the TV Guide. • If you have a Netflix membership subscription, you can enjoy Netflix on this TV.
Middle 1 - Channel list To open the channel list. 2 - Volume Press + or - to adjust the volume level. 3 - Number keys To select a channel directly. 1 - OK key To confirm a selection or setting. To open the channel list while watching TV. 4 - INFO To open or close programme info. 2 - Back To switch back to the previous channel you selected. To return to previous menu. To go back to the previous App/Internet page.
4 - INFO To open or close programme info. control for a long time. • Safely dispose of your old batteries according to the end of use directions. 5 - Channel Press + or - to switch to the next or previous channel in the channel list. To open the next or previous page in Text/Teletext. For more information, in Help, select Keywords and look up End of use. 6 - Mute To mute the sound or to restore it. Cleaning 7 - Apps To open the Apps tab for Apps on Home screen.
4 Wall Mounting Setting Up Your TV is also prepared for the wall mount bracket (sold separately). 4.1 The wall mount size may vary depending on different type of back cases; refer to the Quick Start Guide in your product package to see which size is applied to your TV. Read Safety Read the safety instructions first before you use the TV. Use the following wall mount dimension when purchasing the wall mount.
Turn on TV To switch the TV to standby, press on the remote control. You can also press the small joystick key on the bottom of the TV. Connect Power Cable In standby mode, the TV is still connected to the mains power but consumes very little energy. 4.3 To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
5 Connections 5.1 Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu. 5.2 5.
5.5 Audio Device HDMI ARC Only HDMI 1 on the TV have Return Channel). HDMI ARC (Audio If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals. Headphones You can connect a set of headphones to the connection on the side of the TV.
connections list first. If you clear this list, you will have to confirm or block the connection for every device again. Using Screen Mirroring Switch on Screen Mirroring Press SOURCES > Screen Mirroring Share a Screen on TV Reset Screen Mirroring connections 1 - Activate Screen mirroring on your mobile device. 2 - On your mobile device, select the TV. (This TV will be displayed as TV model name) 3 - Select the TV name on your mobile device, after connection, you can enjoy using Screen Mirroring.
Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes. These programmes have a high level of copy protection. Set Passwords and PIN Codes For some CAMs, you must enter a PIN code to watch its channels. When you set the PIN code for the CAM, we recommend you to use the same code you are using to unlock the TV. Contact a digital TV operator for more information on terms & conditions.
5.8 Computer You can connect your computer to the TV and use the TV as a PC monitor. Use an HDMI cable to connect the computer to the TV.
6 Switch Source 6.1 Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the Arrow / navigation keys and press OK. • To view the technical information of the connected device you are watching, press OPTIONS and select Device info. • To close the source menu without switching to a device, press SOURCES again. 6.
7 for channels Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. This can take a few minutes. 7.1 About Channels and Switch Channels Quick reinstall (Home) > Settings > Install Channels > Antenna/Cable installation > for channels To watch TV channels • Press . The TV tunes to the TV channel you last watched. • Press (Home) > TV > Channels and press OK. • Press + or - to switch channels.
select Advanced. or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels. Frequency step size The TV searches for channels in steps of 8MHz. If this results in having no channels installed or if some channels are missing, you can search in smaller steps of 1MHz. Using the 1MHz steps will take more time to search for and install channels.
To fine tune a channel, select Fine tune and press OK. You can fine tune the channel with or . If you want to store the channel found, select Done and press OK. • Low LO Frequency / High LO Frequency - The local oscillator frequencies are set to standard values. Adjust the values only in case of exceptional equipment that needs different values. • 22 kHz Tone - By default, the Tone is set to Automatic. • LNB Power - By default, LNB Power is set to Automatic.
1 - Switch on the TV. This TV should have channels installed. 2 - Plug in a USB flash drive to USB 2* port. 3 - Select (Home) > Settings > Channels > Channel list copy or Satellite list Copy and press OK. 4 - Select Copy to USB and press OK. 5 - When copying is done, unplug the USB flash drive. Manual Installation (Home) > Settings > Install Channels > Satellite installation > installation Manual Manually install satellite. • LNB - Select the LNB for which you want to add new channels.
2 - Plug in the USB flash drive that holds the channel list of the other TV. 3 - To start the channel list upload, select (Home) > Settings > Channels > Channel List Copy or Satellite list Copy > Copy to TV and press OK. Enter your PIN code if necessary. 4 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB flash drive. Subtitles Language If none of the preferred subtitle languages are available, you can select another subtitle language if available.
Channel List Options Open Option Menu HbbTV on This Channel To open the channel list option menu: If you want to avoid access to HbbTV pages on a specific channel, you can block the HbbTV pages for this channel only. • Press , to switch to TV. • Press Channel list to open the channel list. • Press OPTIONS , and select one of options. • Press Back to close the channel list. 1 - Tune to the channel of which you want to block the HbbTV pages.
Select Channel List > OK > OPTIONS > Create a Favourites List Select channel list 1 - While watching a TV channel, press Channel list to open the channel list. 2 - Select the channel, and press Mark as favourites to mark as favourite. 3 - The selected channel is marked with a . 4 - To finish, press Back . The channels are added to the Favourites list. Select one of channel lists that sorted by different kinds of channels.
On each page of TV Guide, there is a "Did you know" grid inserted on your favourite channel list. The "Did you know"-channel provides useful tips to improve the way you use your TV. Text Options In Text/Teletext, press OPTIONS to select the following… * Satellite channel only can be searched on xxPxSxxxx TV models. • Freeze page To stop the automatic rotation of subpages. • Dual screen / Full screen To show the TV channel and Text alongside each other. • T.O.P. overview To open T.O.P. Text.
8 Update TV Guide TV Guide You can update the TV guide to get the latest programmes information. 8.1 To update the TV guide, press OPTIONS and select Update TV guide*. It may take few times to complete the update. What You Need With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown. Not all channels offer TV guide information.
9 9.3 Freeview Play (for UK models) TV Guide on Freeview Play When Freeview Play* is activated, press TV GUIDE can open the TV guide, press TV GUIDE again to close. 9.1 About Freeview Play Change day If the TV guide information comes from the broadcaster, you can press Channel up to view the schedule of one of the next days. Press Channel down to go back to the previous day. To enjoy Freeview Play*, you need to connect your TV to Internet first.
10 View Photos Videos, Photos and Music 1 - Press SOURCES, select USB and press OK. 2 - Select USB Flash Drive and then select the USB device you need. 3 - Select Photo, you can press Sort to browse your photos by day, month or year. 4 - Select one of photos, and press OK to view the selected photo. • To view photos, select Photos in the menu bar, select a photo thumbnail and press OK.
10.4 360° Photo Options 360° Photo When browsing 360° photo files, press OPTIONS to… View 360° Photos List/Thumbnails View 360° photos with list view or thumbnails view. 1 - Press SOURCES, select USB and press OK. 2 - Select USB Flash Drive and then select the USB device you need. 3 - Select 360° Photos, you can press Sort to browse your 360° photos by date, month, year or alphabetically by name. 4 - Select one of 360° photos, and press OK to view the selected 360° photo.
Character set Select the character set if external subtitle is available. Music Options Audio language Select audio language if available. When browsing music files, press OPTIONS to… Shuffle off, Shuffle on Play songs in sequential order, or at random. Status Display the information of the video file. Repeat, Play once Play songs repeatedly or once. Repeat, Play once Play videos repeatedly or once.
11 11.2 Open TV Setting Menus All Settings Picture Settings Picture Style 11.1 Qucik Menu and Frequent Settings Select a style Press Quick Menu/MENU key on the remote control to find the Quick Menu, then press the arrows (Left) to find the Frequent settings. (Home) > Settings > Picture > Picture style, press OK to change to next available option. Quick menu: • Help - Diagnose and get more information about your TV.
press Reset to reset the value. (Home) > Settings > Picture > Sharpness Press the arrows (Right) or (Left) to adjust the sharpness value of the picture. Contrast Settings Contrast Modes (Home) > Settings > Picture > settings > Contrast mode Adjust the black level of the picture (Home) > Settings > Picture > Black level Expert mode Note: setting of black level much away from reference value (50) may result lower contrast.
• Shift – select on the arrows to shift the picture. You can only shift the picture when it is zoomed in. • Zoom – select on the arrows to zoom in. • Stretch – select on the arrows to stretch the picture vertically or horizontally. • Undo – select to return to the picture format you started with. Super Resolution (Home) > Settings > Picture > settings > Super resolution Expert mode Select On to have a superior sharpness in line edges and details.
• Movie - Ideal sound style for watching movie. • Music - Optimised for listening to music. • Voice - Enhanced the dialog in the vocals. • Stadium - Gives a feel of a large open-air stadium. • Custom - Personalised sound mode. The setting is only available when connected device is compatible with TV for the feature. Personal Sound Settings Clear dialogue (Home) > Settings > Sound > settings > Clear dialogue Personal Select On to improve the sound for speech. Ideal for news programmes.
source is set to HDMI or Analogue sources and the Audio out is set to TV speakers or HDMI sound system. Height speakers (Home) > Settings > 2.0 > Height speakers. Sound > EasyLink Select the preferred height speakers movement. The setting is only available when connected device is compatible with TV for the feature. Audio Out Settings (Home) > Settings > Sound > Advanced > • Auto - Dynamic movement follow contents. • On - Always elevated. • Off - Flat position.
- SPDIF output (DIGITAL AUDIO OUT) will be disabled when streaming Dolby Digital Plus content. (Home) > Settings > Channels > settings > HbbTV cookies Digital out levelling Switch the storage of third-party cookies, site data and cache from HbbTV services on or off. (Home) > Settings > Sound > Advanced > Digital out levelling (Home) > Settings > Channels > settings > HbbTV Device ID reset Adjust the loudness level from device which is connected to digital audio output (SPDIF) or HDMI.
HDMI-CEC Connection - EasyLink Screensaver Settings Connect HDMI CEC-compatible devices to your TV, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched on on the TV and the connected device. (Home) > Settings > General settings > Screensaver settings > Screensaver Select Backdrop to enable the Screensaver. Select Off to disable the Screensaver.
Select Switch off timer, the TV switches off automatically to save energy. Manage Demos (Home) > • TV switches off if receiving a TV signal but you don't press a key on the remote control during a 4 hour period. • TV switches off if not receiving a TV signal nor a remote control command for 10 minutes.
completely. All settings will be reset and installed channels will be replaced. The installation can take a few minutes. Text magnification (Home) > Settings > Universal access > Text magnification Turn on to magnify selected texts and display on the upper screen. Universal Access Settings (Home) > Settings > Universal access Lock Settings With Universal Access switched on, the TV is prepared for use for the deaf, hard of hearing, blind or partially sighted people.
spoken languages for a programme. You can set a preferred primary and secondary audio language. If audio in one of these languages is available, the TV will switch to this audio. • The Auto clock mode setting will be back to Automatic after the TV power is turned off and on again.
12 networks > Wired or Wi-Fi > Wireless and Networks Wired Connection Wi-Fi On/Off What You Need 12.1 To connect the TV to the Internet, you need a network router with a connection to the Internet. Use a high-speed (broadband) connection to the Internet. Home Network To enjoy the full capabilities of your Philips Smart TV, your TV must be connected to the Internet. Connect the TV to a home network with a high-speed Internet connection.
(Home) > Settings > Wireless & networks > Wired or Wi-Fi > Network Configuration > Static IP If you have more than one TV in your home network, you can give the TV a unique name. If you are an advanced user and want to install your network with Static IP addressing, set the TV to Static IP. Netflix settings Network Configuration - Static IP Configuration With Netflix settings, you can view ESN number or deactive Netflix device.
13 Smart TV and Apps 13.1 Setup Smart TV The first time you open Smart TV, you need to configure your connection. Read and agree to the terms and conditions to continue. The Smart TV Home screen is your link to the Internet. You can rent movies online, read newspapers, watch videos and listen to music, also shop online, or watch TV programmes when it suits you with On-line TV. TP Vision Europe B.V.
14 Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
15 Rakuten TV Watch the latest new releases on your Smart TV. The biggest blockbusters, award winning classics and TV series available instantly. Press the key on your remote control or the app icon to open the Rakuten TV app. Your TV must be connected to the Internet to use the app. For more information about Rakuten TV, please visit www.rakuten.tv.
16 Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the key to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app. For more information about Amazon Prime Video, please visit www.primevideo.com.
17 YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app. For more information about YouTube, please visit www.youtube.com.
- Return to this skill in the Alexa App on your phone to enable it, link accounts, and discover your devices. - Return to your TV to complete setup. 18 Alexa Setup on TV for Alexa 1 - Press Home and open "Amazon Alexa" app. 2 - You need Alexa app (on mobile device or web version) be ready to start the setup. 3 - Follow the instructions on screen to accept Privacy Policy terms, name your TV and sign in your Amazon account. The Amazon account is needed to pair with Alexa on TV.
Google Assistant is available on Philips Android TVs running on Android O (8) or higher OS version. GA is available in selected languages and countries with English-UK and German-DE and French-FR being supported from the start. Supported language/countries list is going to be expanded overtime. For latest language and countries support list please contact our consumer care. 19 Google Assistant Your TV can work with the Google Assistant. Google Assistant allows you to use your voice to control your TV – e.
20 back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait. 20.1 Update Software Search for Updates The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.
successfully update on the TV.
European Directive 2006/66/EC, which cannot be disposed with normal household waste. 21 Environmental 21.1 European Energy Label The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes. On the label, you can find the energy efficiency class, the average power consumption of this product in use.
• 1080i - 50 Hz, 60 Hz 22 Specifications Supported Computer/Video resolution 22.1 Resolution — Refresh rate Power • 640 x 480 - 60Hz • 576p - 50Hz • 720p - 50 Hz, 60 Hz • 1920 x 1080p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/TVsupport Power • Mains power : AC 220-240V +/-10% • Ambient temperature : 5°C to 35°C 22.
22.7 Connectivity TV Side • USB 1 - USB 2.0 • USB 2 - USB 2.0 • Common Interface slot: CI+/CAM • HDMI 3 in • HDMI 2 in • HDMI 1 in - ARC • Antenna (75 ohm) • Satellite tuner TV Rear • Headphones - Stereo mini-jack 3.
contraction of the TV as it cools and warms up. This does not affect performance. 23 Troubleshooting The TV goes back to standby after showing the Philips startup screen 23.1 When the TV is in standby, a Philips startup screen is displayed, then the TV returns to standby mode. This is normal behaviour. When the TV is disconnected and reconnected to the power supply, the startup screen is displayed at the next startup.
correct country and system. • Check if the settings are set to two satellites. Changing the installation settings did not solve my No analogue channels found during the installation • Check if the TV was connected with an antenna. Check the cable connections. • Check if you selected the correct DVB (Digital Video Broadcast) system. Select DVB-T (terrestrial) when you use an antenna or common antenna. • Redo the installation and select Digital and analogue channels during the installation.
• Restore picture style, select back to Picture style, then press Restore style. • Reset all TV settings, go to (Home) > Settings > General settings > Reinstall TV. • Check the connections of the source/input devices. Picture Format > Fit to screen. • If the position of the picture is incorrect on the screen, try to check the signal resolution and output type of the connected device, press (Home) > Settings > Picture > Picture Format > Original.
item Menu language and press OK. 4 - Select your language and press OK. No volume icon shown • When an HDMI-CEC audio device is connected and you use the TV Remote Control to adjust the volume level from the device, this behaviour is normal. 23.9 USB Photos, videos and music from a USB device do not show • Check if the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation. • Check if the USB storage device is compatible with the TV.
ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 24 Safety and Care 24.1 Stability Hazards Safety A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Important Read and understand all safety instructions before you use the TV.
some lithium battery types). • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. 24.
Therefore, please note this is not subjected to repair, exchange or refund within and/or out of the warranty period. 25 Terms of Use Backlight characteristics All Philips TV have gone through stringent tests and checks before shipping to you. You can be rest assured that we place the quality of our TVs the utmost importance so that you do not suffer any viewing displeasure while watching your TV.
26 26.4 Copyrights Wi-Fi Alliance 26.1 The Wi-Fi CERTIFIED® Logo is a registered trademark of Wi-Fi Alliance®. HDMI The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. 26.5 Other Trademarks All other registered and unregistered trademarks are the property of their respective owners. 26.2 HEVC Advance Covered by one or more claims of the HEVC patents listed at patentlist.
regardless of the platform on which their software is built, relieving them of the need to code special-case conditions to work around or take advantage of platform-specific deficiencies or features. Source: https://github.com/apache/apr 27 Open Source 27.1 Open Source Software This television contains open source software. TP Vision Europe B.V.
The "and coordination" part is important; D-Bus provides a bus daemon that does things like: - notify applications when other apps exit - start services on demand - support single-instance applications Source: https://github.com/freedesktop/dbus operating system. ALSA has the following significant features: Efficient support for all types of audio interfaces, from consumer sound cards to professional multichannel audio interfaces. Fully modularized sound drivers.
libpng (1.0.1) libpng -THE reference library for reading, displaying, writing and examining png Image Network Graphics. This piece of software is made available under the terms and conditions of the libpng license, which can be found below. Source: http://sourceforge.net/projects/libpng/files/ developed for the GNOME software suite and is available under a "MIT" license. Source: http://www.xmlsoft.org linux_kernel (4.
library in a variety of computer languages are available. Source: http://www.openssl.org/ pcre (8.45) The PCRE library is a set of functions that implement regular expression pattern matching using the same syntax and semantics as Perl 5. PCRE has its own native API, as well as a set of wrapper functions that correspond to the POSIX regular expression API. The PCRE library is free, even for building proprietary software. https://www.pcre.org/ procps (ps, top) (3.3.
28 Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Index 3 360° Photo G 29 Gamma General Settings Get Support Google Assistant A Advanced Picture Settings Advanced Sound Settings Alexa Antenna App lock Audio Language Audio Out Menu Auto Clock Mode Automatic software update 32 35 48 12 39 39 35 40 50 H C Channel List Channel List Copy Channel Options Channel, Channel Filter Channel, Rename Channel Channels Child Lock Child Lock, Change Code Child Lock, Set Code CI Card Clear Internet Memory Clock Colour Enhancement Colour Settings Colour Temperature Co
Remote Control - IR Sensor Rename or replace device icon Repair Reset Settings 9 17 6 38 Wi-Fi S Safety and Care Satellite Screen Mirroring Screen Mirroring Connection Screen Off Screensaver settings Self-diagnose Shop Setup Sleep Timer Smart TV Software Version Sound Menu Sound Styles Sound, Auto Volume Levelling Sound, Delta Volume Source List Standby Mode Static IP Store Subtitle Language Super resolution Switch Off Timer Switch On with Wi-Fi Switching On 59 12 13 14 37 37 5 38 40 43 50 33 33 35 35 1
Powered by TCPDF (www.tcpdf.