436M6 www.philips.
Table of Contents 1. Important �������������������������������������� 1 1.1 Safety precautions and maintenance ��������������������������������1 1.2 Notational Descriptions ����������� 3 1.3 Disposal of product and packing material ������������������������� 3 2. Setting up the Display ��������������� 5 2.1 Installation ����������������������������������� 5 2.2 Operating the Display ���������������8 2.3 Remove the Base Assembly for VESA Mounting ��������������������������12 2.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips Display. Take time to read this user manual before you use your Display. It contains important information and notes regarding operating your Display.
1. Important • If foreign substance or water gets in your Display, please turn the power off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center. • Do not store or use the Display in locations exposed to heat, direct sunlight or extreme cold.
1. Important 1.3 Disposal of product and packing material 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Waste Electrical and Electronic Equipment-WEEE Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings.
1. Important Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the Display Connecting to your PC 2. Setting up the Display 436M6VBPA 2.1 Installation Package contents 10 436M6 1 Quick Start Register your product and get support at www.philips.com/welcome 6 Batteries Remote Control Unit 5 7 9 11 9 2 3 Display User’s Manual 使用产品前请阅读使用说明 Contents: User’s Manual Monitor drivers ©2 rsi o n 保留备用 k nin Ko hi n a. V e 018 This product was manufactured and brought to the market by or on behalf of Top Victory Investments Ltd.
2. Setting up the Display USB hub Note USB 2.4Ghz wireless devices, such as, wireless mouse, keyboard, and headphones, maybe have interference by the high-speed signal of USB 3.0 devices, which may result in a decreased efficiency of the radio transmission. Should this happen, please try the following methods to help reduce the effects of interference.
2. Setting up the Display USB charging The remote control is powered by two 1.5V AAA batteries. This display has USB ports capable of standard power output including some with USB Charging function (identifiable with power icon ). You can use these ports to charge your Smart phone or power your external HDD, for example. The display must be powered ON at all times to be able to use this function. To install or replace batteries: 1. Press and then slide the cover to open it. 2.
2. Setting up the Display Description of the remote control buttons 2.2 Operating the Display Description of the control buttons 1 2 4 5 3 7 6 8 Press to switch power on. Press more than 3 seconds to switch power off. Access the OSD menu. Confirm the OSD adjustment. 9 10 11 12 13 14 15 Adjust the speaker volume. Adjust the OSD menu. Change the signal input source. Adjust the OSD menu. SmartImage.
2. Setting up the Display 1 Press to switch power on and off. 2 Change the signal input source. 3 Access the OSD menu. 4 Adjust the OSD menu/ Turn up the values. 5 Return to previous OSD level. 6 Confirm the OSD adjustment. 7 Access the OSD menu. Confirm the OSD adjustment. 8 Adjust the OSD menu / Turn down the values. EasyLink (CEC)(436M6VBPA) What is it? HDMI is a single cable to carry both picture and audio signals from your devices to your monitor, saving you from cable clutter.
2. Setting up the Display Description of the On Screen Display Note 1. The EasyLink-compliant device must be switched on and selected as the source. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD Displays. It allows an end user to adjust screen performance or select functions of the Displays directly through an on-screen instruction window. A user friendly on screen display interface is shown as below: 2.
2. Setting up the Display The OSD Menu 436M6VBRA Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. Main menu Main menu Ambiglow Off Ambiglow Auto Mode User Define On Off Input HDMI 2.
2. Setting up the Display Resolution notification 2.3 Remove the Base Assembly for VESA Mounting This Display is designed for optimal performance at its native resolution, 3840 x 2160 @ 60 Hz. When the Display is powered on at a different resolution, an alert is displayed on screen: Use 3840 x 2160 @ 60 Hz for best results. Before you start disassembling the Display base, please follow the instructions below to avoid any possible damage or injury. 1. Place the Display face down on a smooth surface.
2. Setting up the Display How to enable MultiView by OSD menu? 2.4 MultiView 436M6VBRA What is it? Multiview enables active variety connect and view so that you can work with multiple devices like PC and Notebook side-by-side simultaneously, making complex multi-tasking work a breeze. 1.
2. Setting up the Display 436M6VBPA MultiView in OSD menu • 436M6VBRA PIP / PBP Mode: There are 4 modes for MultiView: [Off], [PIP], [PBP 2Win], and [PBP 4Win]. 436M6VBPA PIP / PBP Mode: There are 3 modes for MultiView: [Off], [PIP], [PBP]. [PIP]: Picture in Picture B Open up a sub-window side-by-side of other signal source. 1. Toggle to the right to enter OSD Menu Screen. 2.
2. Setting up the Display B Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode. If you expect to see full screen side by side, adjust your devices resolutions as pop up attention resolution, you will able to see 2 devices source screen project to this display side by side without black strips. Note the analog signal is not support this full screen in PBP mode.
3. Image Optimization 2. Toggle to the up or down to select between FPS, Racing, RTS, Gamer 1, Gamer 2, LowBlue Mode, SmartUniformity and Off. 3. Image Optimization 3.1 SmartImage 3. The SmartImage on screen display will remain on screen for 5 seconds or you can also toggle to the left to make confirmation. There are 8 modes to select: FPS, Racing, RTS, Gamer 1, Gamer 2, LowBlue Mode, SmartUniformity and Off.
3. Image Optimization rays from LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. • • 3.
3. Image Optimization 3.3 HDR It is compatible with input signals in HDR10 format. The display may automatically activate the HDR function if the player and content are compatible. Please contact the device manufacturer and the content provider for information on the compatibility of your device and content. Please select “OFF” for the HDR function when you have no need for automatical activation function.
4. Technical Specifications 4. Technical Specifications Picture/Display Display Panel Type Backlight Panel Size Aspect Ratio SmartContrast (typ.) Response Time (typ.) SmartResponse (typ.) Optimum Resolution Viewing Angle Picture Enhancement Display Colors Vertical Refresh Rate Horizontal Frequency sRGB Color Gamut HDR MVA W-LED 42.51" (108 cm) 16:9 50,000,000:1 8 ms (GtG) 4 ms (GtG) VGA: 1920x1080@60Hz (436M6VBRA) HDMI/DisplayPort: 3840x2160@60Hz 178° (H) / 178° (V) @ C/R > 10 SmartImage 1.
4.
4. Technical Specifications Dimensions Product with stand (WxHxD) Product without stand (WxHxD) Product with packaging (WxHxD) Weight Product with stand Product without stand Product with packaging Operating Condition Temperature range (operation) Relative humidity (operation) Atmospheric pressure (operation) Temperature range (Non-operation) Relative humidity (Non-operation) Atmospheric pressure (Non-operation) 976x661x264 mm 976x574x63 mm 1090x764x338 mm 436M6VBRA: 12.72 kg 436M6VBPA: 14.
4. Technical Specifications Video Timing 4.1 Resolution & Preset Modes Maximum Resolution 1920 x 1080 @ 60 Hz (analog input) 3840 x 2160 @ 60 Hz (digital input) Recommended Resolution 3840 x 2160 @ 60 Hz (digital input) Resolution V. freq (Hz) 640 x 480p 60Hz 4:3 720x 480p 60Hz 4:3 720 x 480p 60Hz 16:9 1280x 720p 60Hz 1920x 1080i 60Hz H. freq (kHz) Resolution V. freq (Hz) 1920x 1080p 60Hz 31.47 720 x 400 70.09 720 x 576p 50Hz 4:3 31.47 640 x 480 59.94 720 x 576p 50Hz 16:9 35.
4. Technical Specifications 2. If you feel the texts in your display is a little fade away, you can adjust your fonts setting in your PC/Notebook as following steps.
5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the Display can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the Display will 'wake up' automatically.
6. Regulatory Infomation Pixels and Sub pixels 6. Customer care and warranty A pixel, or picture element, is composed of three sub pixels in the primary colors of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 6.
6. Regulatory Infomation - Red + Green = Yellow Green + Blue = Cyan (Light Blue) Proximity of Pixel Defects Three adjacent lit sub pixels (one white pixel). Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
6.
6. Regulatory Infomation 6.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
7. Customer care and warranty • 7. Troubleshooting & FAQs AUTO button doesn't function • 7.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Visible signs of smoke or sparks No Picture (Power LED not lit) Make sure the power cord is plugged into the power outlet and into the back of the Display.
7. Customer care and warranty Horizontal flicker appears • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode. disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. Image appears distorted. Text is fuzzy or blurred.
7. Customer care and warranty in your user manual to install the drivers. Your computer may ask you for Display drivers (.inf and .icm files) or a driver disk when you first install your Display. 7.2 General FAQs Q1: When I install my Display what should I do if the screen shows 'Cannot display this video mode'? Q4: How do I adjust the resolution? Ans.: Recommended resolution for this Display: 3840 x 2160 @ 60 Hz. • Unplug all cables, then connect your PC to the Display that you used previously.
7. Customer care and warranty • Press "OK" to show the OSD (On Screen Display) menu Q10: Are Philips LCD Displays Plugand- Play? • Press "Down Arrow" to select the option "Color" then press "OK" to enter color setting, there are three settings as below. 1. Color Temperature: The 7 settings are Native, 5000K, 6500K, 7500K, 8200K, 9300K and 11500K. With settings in the 5000K range the panel appears "warm, with a redwhite color tone", while a 11500K temperature yields "cool, bluewhite toning". Ans.
7. Customer care and warranty Q13: How to unlock/lock my hot key? devices are capable of being charged from USB type C port. Please check if your notebook/ device is capable of power charging function. You may have a USB type C port, but it may be limited to only data transmission function. If your notebook/device supports charging function through USB type C port, please make sure that this function is enabled from your system’s bios or other software combination, if required.
7. Customer care and warranty 7.3 Multiview FAQs Q1: Can I enlarge the PIP sub window? Ans.: Yes, there are 3 sizes to select: [Small], [Middle], [Large]. You can press to enter OSD menu. Select your preferred [PIP Size] option from the [PIP / PBP] main menu. Q2: How to listen to Audio, independent of video? Ans.: Normally the audio source is linked to the main picture source.
© 2018 Koninklijke Philips N.V. All rights reserved. This product was manufactured and brought to the market by or on behalf of Top Victory Investments Ltd. or one of its affiliates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. Specifications are subject to change without notice.
