Operation Manual
Table Of Contents
- Contents
- 1. Notice
- 2. Important
- 3. Get started
- 4. Use your TV
- 5. Use more of your TV
- 6. Set up your TV
- Introduction
- Benefits of specific Hotel TVs
- Professional Setup Remote control (22AV8573 optional)
- Professional mode options
- Setup settings
- PBS Setup
- TV Setup
- Change picture and sound settings (with PBS setup RC)
- More Channel Settings
- Change channel settings
- Source Selection
- Store Settings
- Smart Clone
- Welcome Logo / Hotel Information
- RF Download
- Start Download
- 7. Connect your TV
- 8. Troubleshooting
- 9. Product specifications
- 10. Index
MediaSuite xxHFL5573D/10 Page 31
English
[Enable Subtitles]
Enables or disables the use of subtitles in a
DVB broadcast channel:
[Off]: No subtitles services available
(Prison Mode)
[On]: Subtitles services available
[Enable Channel Map]
Select Channel Map to be viewed:
[Native]: Show standard default channel
map
[BDS]: To be used only if a STB is
connected
[Installation]
This setting allows selecting which RF signal
will be scanned during channel installation.
Each entry [DVB-T/T2 – DVB-C - Analog] is
can be set on (enabled) or off (disabled).
[Jointspace]
This feature is not supported for hotel mode.
Always set it to off.
[Freeze on no signal]
When this feature is enabled TV will keep on
screen the last receive frame in case of
signal loss on DVB signals.
[Power settings]
[Power on]
The power on function allows the TV to enter
a specific mode ([On], [Standby]) of operation
when the mains power is activated (cold
start):
[On]: The TV will always turn on (show
startup channel) after the mains
power is activated.
[Standby]: When set, the TV will always
turn to standby (status as defined
in Low power standby option) after
the mains power is activated.
[Low power standby]
The Low power standby option defines the
TV to enter a specific standby mode after
pressing the On/Off button on the remote
control. To wake-up the TV both On/Off
button on the RC or TV can be pressed:
[Fast]: The TV will quickly turn on (show
startup channel. (This mode is
having more power consumption
then the Green mode).
[Green]: The TV will slower turn on (show
startup channel) then the Fast.
(This mode is having less power
consumption then the Fast mode).
[Smart power]
The power consumption for the Smart power
mode is defined by the Smart Picture setting
in the TV Setup part.
[Off]: The TV will start with Standard
Smart Picture setting, but the
setting can be changed in the
guest setup mode.
[On]: The TV will start with “Energy
Saving” Smart Picture setting and
Smart Picture setup and is not
selectable in the guest setup
mode.(with this the power
consumption mode is predictable).
[Auto switch off]
Enables or disables the use of automatic
switch off the TV if no RC action is noticed
after 240 minutes:
[Off]: TV will not switch off after 240
minutes
[On]: TV will switch of after 240 minutes