Gaming Monitor Momentum 3000 27M1N3500L 27M1N3500LS EN User manual Customer care and warranty Troubleshooting and FAQs Register your product and get support at www.philips.
Table of Contents 1. Important ����������������������������������� 1 1.1 Safety precautions and maintenance ��������������������������������� 1 1.2 Notational Descriptions ������������ 3 1.3 Disposal of product and packing material ������������������������������������������ 4 2. Setting up the monitor �������������� 5 2.1 Installation ������������������������������������ 5 2.2 Operating the monitor ���������������7 2.3 Remove the Base Assembly for VESA Mounting ��������������������������� 9 3.
1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
tilt angle maximum is exceeded, the monitor damage will not be covered under warranty. • Oil-based cleaning solutions may damage the plastic parts and void the warranty. • Do not knock or drop the monitor during operation or transportation.
Important information for Burn-in/ Ghost image • • Note Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor 2 Install the base 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2.1 Installation 1 Package contents Gaming Monitor Momentum 3000 2. Hold the stand with both hands. (1) Gently attach the base to the stand. 27M1N3500L 27M1N3500LS Quick start Register your product and get support at www.philips.com/welcome (2) Use your fingers to tighten the screw located at the bottom of the base.
3 Connecting to your PC 27M1N3500LS 27M1N3500L 2 3 4 5 6 1 Fast Charger 2 3 4 5 6 7 8 9 1 Earphone-Hang USB hub 2 1 1 Kensington anti-theft lock USB A-B 2 HDMI 1 input Earphone-Hang 3 HDMI 2 input 4 DisplayPort input 5 Audio out 6 AC power input Connect to PC 1. Connect the power cord to the back of the monitor firmly. 1 Kensington anti-theft lock 2. Turn off your computer and unplug its power cable. 2 HDMI 1 input 3 HDMI 2 input 3.
2.2 Operating the monitor 1 2 Description of the On Screen Display What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below: Press to switch power on. Press more than 3 seconds to switch power off.
Main menu 3 Resolution notification Sub menu Game Setting Adaptive Sync This monitor is designed for optimal performance at its native resolution, 2560 x 1440. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 2560 x 1440 for best results. MPRT MPRT Level 0 ~20 Crosshair Low Input Lag SmartResponse SmartFrame Size (1,2,3,4,5,6,7) Brightness (0~100) Contrast(0~100) H. position V. position LowBlue Mode On Input 1 HDMI 2.0 2 HDMI 2.
2.3 Remove the Base Assembly for VESA Mounting Height adjustment (27M1N3500L) Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 130mm Pivot (27M1N3500L) 27M1N3500L 27M1N3500LS 0° 0° -90° 90° 2. While keeping the release button pressed, tilt the stand and slide it out.
Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 100mm 100mm 0° 90° -5° * Display design may differ from those illustrated. Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees. • Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
3. Image Optimization 2. Toggle to the up or down to select among FPS, Racing, RTS, Gamer 1, Gamer 2, LowBlue Mode, EasyRead and Off. 3.1 SmartImage 1 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also toggle to the left to make confirmation. There are multiple selections: FPS, Racing, RTS, Gamer 1, Gamer 2, LowBlue Mode, EasyRead and Off.
• Gamer 2: User’s preference settings saved as Gamer 2. • LowBlue Mode: LowBlue Mode for easy on-the-eyes productivity Studies have shown that just as ultra-violet rays can cause eye damage, shortwave length blue light rays from LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. • EasyRead: Helps improve reading of text based application like PDF ebooks.
3.2 SmartContrast 1 What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a Monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. 2 Why do I need it? You want the very best visual clarity and viewing comfort for every type of content.
4. Adaptive Sync • AMD Radeon R9 285 • AMD Radeon R7 260X • AMD Radeon R7 260 ■■ Processor A-Series Desktop and Mobility APUs Adaptive Sync • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
5. HDR HDR Settings in Windows10 system. Steps 1. Right click on the desktop, enter to Display settings. 2. Select the display/monitor. 3. Select an HDR-capable display under Rearrange your displays. 4. Select Windows HD Color settings. 5. Adjust Brightness for SDR content. Note Windows10 edition is required; always upgrade to the most updated version. Below linkage is for the further more information from mircrosoft official website. https://support.microsoft.
6. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast Ratio (typ.
Height adjustment Pivot 130 mm (27M1N3500L) -90 / +90 degree (27M1N3500L) Power Consumption Normal Operation Sleep (Standby mode) Off mode Heat Dissipation* Normal Operation Sleep (Standby mode) Off mode Power LED indicator Power Supply Dimensions Product with stand (WxHxD) Product without stand (WxHxD) Product with packaging (WxHxD) Weight Product with stand Product without stand Product with packaging Operating Condition Temperature range (operation) Relative humidity (operation) Atmospheric pressure (o
Atmospheric pressure (Non-operation) Environmental and energy ROHS Packaging Specific Substances Cabinet Color Finish 500 to 1060hPa YES 100% recyclable 100% PVC BFR free housing Black Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
6.1 Resolution & Preset Modes 1 Note Please notice that your display works best at native resolution of 2560 x 1440. Maximum Resolution 2560 x 1440 @ 144Hz For best output performance, please always ensure that your graphic card is capable of achieving the maximum resolution and refresh rate of this Philips display. 2 Recommended Resolution 2560 x 1440 @ 60 Hz H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.00 31.47 640 x 480 60.00 35.00 640 x 480 67.00 37.86 640 x 480 72.
7. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: Power Management Definition VESA Mode Video H-sync V-sync Power Used LED Color Active ON Yes Yes 33.0 W (typ.
8. Customer care and warranty of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 8.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
BRIGHT DOT DEFECTS 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* Total bright dot defects of all types ACCEPTABLE LEVEL 2 1 0 >15mm 2 BLACK DOT DEFECTS 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two black dot defects* Total black dot defects of all types ACCEPTABLE LEVEL 5 or fewer 2 or fewer 0 >15mm 5 or fewer TOTAL DOT DEFECTS Total bright or black dot defects of all types ACCEPTABL
8.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
9. Troubleshooting & FAQs • Visible signs of smoke or sparks • Do not perform any troubleshooting steps • Disconnect the monitor from mains power source immediately for safety • Contact with Philips customer service representative immediately. 9.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
9.2 General FAQs may result in severe “burn-in” or “after-imaging” or “ghost imaging” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Image appears distorted. Text is fuzzy or blurred. Ans.: R ecommended resolution for this monitor: 2560 x 1440.
install your monitor. Follow the instructions in your user manual, monitor drivers (.inf and .icm files) will be installed automatically. Q4: How do I adjust the resolution? Ans.: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". Q5: What if I get lost when I am making monitor adjustments via OSD? Ans.
Q10: Are Philips LCD monitors Plugand- Play? 1440. For best display, please use this resolution. Ans.: Yes, the monitors are Plug-andPlay compatible with Windows 10/8.1/8/7, Mac OSX. Q13: How to unlock/lock my hot key? Ans.: Please press for 10 seconds to unlock/lock the hot key, by doing so, your display pops out “Attention” to show the unlock/ lock status as shown below illustrators. Q11: What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in LCD panels? Ans.
2021 © TOP Victory Investments Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.