Business Monitor 5000 Series 27B1U5601H EN User manual Customer care and warranty Troubleshooting and FAQs Register your product and get support at www.philips.
Table of Contents 1. Important �����������������������������������������1 1.1 Safety precautions and maintenance �������������������������������������1 1.2 Notational Descriptions �����������������3 1.3 Disposal of product and packing material ����������������������������������������������4 2. Setting up the monitor ����������������5 2.1 Installation ����������������������������������������5 2.2 Operating the monitor ������������������8 2.
1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will not be covered under warranty. • To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel. • Oil-based cleaning solutions may damage the plastic parts and void the warranty.
• Temperature: 0-40°C 32-104°F • • Humidity: 20-80% RH Note Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed. Important information for Burn-in/ Ghost image • • Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1.3 Disposal of product and packing material Taking back/Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2 Install the base 2. Setting up the monitor 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2.1 Installation 1 Package contents Business Monitor 5000 Series 27B1U5601H Quick start Register your product and get support at www.philips.com/welcome Power 2. Hold the stand with both hands. (1) Gently attach the base to the stand. * DP *USB C-C * HDMI (2) Use your fingers to tighten the screw located at the bottom of the base.
DisplayPort output 3 Connecting to your PC 9 USB downstream 3 4 5 10 6 8 11 12 7 9 USBC microphone in combo jack Fast Charger 1 2 10 Audio (In/Out): audio out / or AUDIO OUT (PD15W) 13 11 USBC (Power supply up to 15W) 12 USB downstream/USB fast charger RJ45 13 Kensington anti-theft lock Connect to PC 1. Connect the power cord to the back of the display firmly. USB docking (USB C-C) 1 a-1 2. Turn off your computer and unplug its power cable. 2 c a-2 3.
after the installation has completed. functions active even when the monitor is in sleep/Standby mode. 5. Now you will be able to see “Realtek USB Ethernet Network Adapter” from your program installed list. 6. We recommend to periodically visit the above web link to check for the availability of the most updated driver. Note Please contact Philips service hotline for Mac address clone tool as necessary.
2.2 Operating the monitor 1 Description of the control buttons 2 Webcam 1 2 3 4 1 3 7 6 5 4 2 1 1 Switch monitor’s power ON or OFF. 2 Access the OSD menu. Confirm the OSD adjustment. 3 Adjust the OSD menu. 4 User preference key. Customize your own preference function from OSD to become the “user key”. 5 Change the signal input source. 6 Return to previous OSD level. 7 SmartImage hot key.
3 Customize your own “USER” key This hot key allows you to setup your favorite function key. 4 Description of the On Screen Display What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below: 1. Press button on the front bezel to enter OSD Menu Screen.
5 Resolution notification Note If this display has "DPS" for ECO design, the default setting is "ON" mode: it makes the screen looks slightly dim; for optimum brightness, enter to the OSD to set "DPS" to "OFF" mode. Main menu PowerSensor This monitor is designed for optimal performance at its native resolution, 2560 x 1440. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 2560 x 1440 for best results.
Pivot 6 Physical Function Tilt 30° -5° 0° 0° -90° Swivel 90° Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees. • Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
2.3 Built-in Windows Hello™ pop-up webcam Please follow the steps for the setting: 1. Press the built-in webcam on the top of this monitor, and turn it to the front. 1 What is it? Philips' innovative and secure webcam pops up when you need it and securely tucks back into the monitor when you are not using it. The webcam is also equipped with advanced sensors for Windows Hello facial recognition, which conveniently logs you into your Windows devices in less than 2 seconds, 3 times faster than a password.
4. If you connect the USB cable from “USB C1 ” port of this monitor, please enter OSD menu to make a appropriate selection of “USB C1” under the “KVM” layer. b. Click on sign-in options in the sidebar. c. You need to set up a PIN code before you're allowed to use Windows Hello. Once you've added this, the option for Hello will unlock. Note 1.
1 USBC1 1 PC1/PC2 USBC2 PC1 PC2 2 3. Enter to OSD menu. Go to KVM layer and select “Auto”, “USB C1” or “USB C2” to switch the control of peripherals from one device to another. Simply repeat this step for switching the control system using one set of peripheral. 2.4 MultiClient Integrated KVM 1 What is it? With MultiClient Integrated KVM switch, you can control two separate PCs with one monitor-keyboard-mouse set up.
2.5 Noise Cancelling 2. Connect peripherals to the USB downstream port of this monitor. 1 This monitor has Noise Cancelling functionality. When connected via USBC1/USBC2 during video conferencing, the monitor will automatically filter for human sounds. This function can be turned off in the OSD menu, under Noise Cancelling (default=ON). 1 PC1/PC2 USBC2 USBC1 PC1 PC2 2 USB 3. Enter to OSD menu.
2.6 MultiView PowerSensor PIP / PBP Mode Off LightSensor PIP / PBP Input DisplayPort LowBlue Mode PIP Size Small Input PIP Position Top-Right Picture Swap PIP/PBP 2. Press ▲ or ▼ button to select main menu [PIP / PBP], then press button. 1 What is it? 3. Press ▲ or ▼ button to select [PIP / PBP Mode], then press button.
[PBP]: Picture by Picture • Open up a sub-window side-by-side of another signal source. A (main) B PIP Position: When PIP is activated, there are four sub-window positions to choose. Top-Left B When the sub source is not detected: A (main) B A Top-Right B A (main) (main) Bottom-Left Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode.
2.7 Remove the Base Assembly for VESA Mounting Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 100mm 100mm 2. Place the monitor face down on a smooth surface.
3. Image Optimization 1. Press to launch the SmartImage on screen display. 2. Keep pressing to toggle among EasyRead, Office, Photo, Movie, Game, Economy, LowBlue Mode, Off. 3.1 SmartImage What is it? 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also press "OK" to make confirmation. There are multiple modes to select: EasyRead, Office, Photo, Movie, Game, Economy, LowBlue Mode, Off.
Photo: This profile combines color saturation, dynamic contrast and sharpness enhancement to display photos and other images with outstanding clarity in vibrant colors - all without artifacts and faded colors. by simply press the hotkey , then press to select LowBlue Mode, see above SmartImage selection steps.
3.3 LightSensor What is it? Light Sensor is a unique and intelligent way of optimizing picture quality by measuring and analyzing the incoming signal to automatically adjust picture quality settings. Light Sensor uses a sensor to adjust the picture brightness depending on the room light conditions. How to enable LightSensor? 1. Press button on the front bezel to enter OSD menu screen. 2.
4. Power Delivery and Smart Power 3 Power through USBC1 port: 1. Connect the device to the USBC1 port. You can power your compatible device with up to 96 Watts of power from this monitor. 2. Turn on [Smart Power]. 3. If [Smart Power] is on, and USBC1 is used for power, then maximum power delivery depends on the brightness value of the monitor. You may adjust the brightness value manually to increase power delivery from this monitor.
5. Daisy-chain function DisplayPort multi-streaming over USBC1 DisplayPort Multi-Stream feature enables multiple monitor connections. This Philips display is equipped with DisplayPort interface and DisplayPort over USBC1 which enables daisychaining to multiple displays. PC USBC1 Now you can daisy chain and use multiple monitors via a single cable from one display to the next.
Note The secondary monitor in the chain must support DisplayPort multi-streaming, and the maximum resolution support is 2560 x 1440@60Hz.
6. Designs to prevent computer vision syndrome (CVS) 3. Ideal working posture • Reposition your screen to appropriate height and angle according to your height. 4. Choose Philips monitor for easy-oneyes. Philips monitor is designed to prevent eye strain caused by prolonged computer use. • Anti-glare screen: Anti-glare screen efficiently reduces annoying and distracting reflections that caused eye fatigue.
7. PowerSensor™ How does it work? • PowerSensor works on principle of transmission and reception of harmless “infrared” signals in order to detect user-presence. • When the user is in front of the monitor, the monitor operates normally, at the predetermined settings that the user has set- i.e. brightness, contrast, color, etc • from the monitor use the maximum detection signal for distances up to 120 cm or 47 inches.
mode (90 degree/vertical position); it will automatically turn ON if monitor is returned to its default Landscape position. Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength. Keep sensor lens clean, if the sensor lens is dirty, wipe it with alcohol to avoid reducing of distance detection .
8. Technical Specifications Picture/Display Display Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast ratio(typical) Native Resolution Maximum Resolution Viewing Angle Picture Enhancement Display Colors Vertical Refresh Rate Horizontal Frequency sRGB LowBlue Mode EasyRead Flicker Free Connectivity Signal Input source Connectors Sync input USB USB Ports Power Delivery Super Speed Convenience USER convenience IPS Technology W-LED 27" W ( 68.5 cm ) 16:9 0.2331(W) x 0.
Built-in speaker Built-in Webcam MultiView OSD Languages Other Convenience Plug & Play Compatibility Stand Tilt Swivel Height adjustment Pivot Power Consumption Normal Operation Sleep (Standby mode) Off mode Off mode(AC switch) Heat Dissipation* Normal Operation Sleep (Standby mode) Off mode Off mode (AC switch) PowerSensor Power LED indicator Power Supply Dimensions Product with stand (WxHxD) Product without stand (WxHxD) Product with packaging (WxHxD) 5Wx2 5.
Weight Product with stand Product without stand Product with packaging Operating Condition Temperature range (operation) Relative humidity (operation) Atmospheric pressure (operation) Temperature range (Non-operation) Relative humidity (Non-operation) Atmospheric pressure (Non-operation) Environmental and energy ROHS Packaging Specific Substances Cabinet Color Finish 1 2 3 4 7.30 kg 5.54 kg 10.
8.1 Resolution & Preset Modes H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.50 640 x 480 75.00 35.16 800 x 600 56.25 37.88 800 x 600 60.32 46.88 800 x 600 75.00 48.08 800 x 600 72.19 47.73 832 x 624 74.55 48.36 1024 x 768 60.00 56.48 1024 x 768 70.07 60.02 1024 x 768 75.03 44.77 1280 x 720 59.86 60 1280 x 960 60 63.89 1280 x 1024 60.02 79.98 1280 x 1024 75.03 89.
9. Power Management If you have VESA DPM compliance display card or software installed in your PC, the display can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the display will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: Power Management Definition VESA Mode Video H-sync V-sync Power Used LED Color 27.0 W (typ.) White 187.0 W (max.
10. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 10.1 Philips’ Flat Panel Displays Pixel Defect Policy Philips strives to deliver the highest quality products.
Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
BRIGHT DOT DEFECTS 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* Total bright dot defects of all types ACCEPTABLE LEVEL 2 1 0 >15mm 2 BLACK DOT DEFECTS 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two black dot defects* Total black dot defects of all types ACCEPTABLE LEVEL 3 or fewer 2 or fewer 0 >15mm 3 or fewer TOTAL DOT DEFECTS Total bright or black dot defects of all types ACCEPTABL
10.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
11. Troubleshooting & FAQs • Check to see if the display cable has bent pins. • 11.1 Troubleshooting Make sure the computer is turned on. Visible signs of smoke or sparks This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
11.2 General FAQs “after-image” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. Q1: When I install my display what should I do if the screen shows 'Cannot display this video mode'? Image appears distorted. Text is fuzzy or blurred. Ans.: Recommended resolution for this display: 2560 x 1440. • • Unplug all cables, then connect your PC to the display that you used previously.
and .icm files) when you first install your monitor. Follow the instructions in your user manual, monitor drivers (.inf and .icm files) will be installed automatically. Q8: Can I change the color setting of my display? Ans.: Yes, you can change your color setting through OSD control as the following procedures, Q4: How do I adjust the resolution? Ans.: Your video card/graphic driver and display together determine the available resolutions.
to connect the display to your Mac system. Please contact your Philips sales representative for more information. Q12: Why is my Display not showing sharp text, and is displaying jagged characters? Ans.: Your LCD display works best at its native resolution of 2560 x 1440. For best display, please use this resolution. Q10: Are Philips LCD displays Plug-andPlay? Ans.: Yes, the displays are Plug-andPlay compatible with Windows 11/10/8.1/8/7 Q13: How to unlock/lock my hot key? Ans.
change Auto to OFF and then select DP (DisplayPort) input. This will allow the signal to pass through to the next monitor. Both monitors should begin displaying properly. 2) Disconnect the video cable between the first and second monitor, then connect the second monitor directly to the computer. On the second monitor press the OSD menu button, select Input, change Auto to OFF, and select DP input. Reconnect the first and second monitors to the computer and the daisy chain function will be enabled. 3.
11.3 Multiview FAQs Q1: Can I enlarge the PIP sub window? Ans.: Yes, there are 3 sizes to select: [Small], [Middle], [Large]. You can press to enter OSD menu. Select your preferred [PIP Size] option from the [PIP / PBP] main menu. Q2: How to listen to Audio, independent of video? Ans.: Normally the audio source is linked to the main picture source. If you want to change audio-source input , you can press to enter OSD menu. Select your preferred [Audio Source] option from the [Audio] main menu.
2022 © TOP Victory Investments Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
