User Manual
Step 3: Update the TV software
Warning
Do not switch off the TV or remove the USB fl ash drive during the •
software update.
If a power failure occurs during the update, do not remove the USB •
fl ash drive from the TV. The TV will continue the update as soon as
power is restored.
If an error occurs during the update, retry the procedure. If the error •
reoccurs, contact Philips Consumer Care.
1 Switch off the TV and disconnect all USB storage devices.
2 Connect the USB fl ash drive (containing the software update)
to the USB connector on the TV.
3 Switch on the TV.
The TV detects the USB fl ash drive and starts to scan for »
software version.
A message prompts you to update the software. »
Note
If the USB fl ash drive is not detected, disconnect it and reconnect •
again.
4 Follow the on-screen instructions to update the TV software.
5 Once complete, disconnect the USB fl ash drive from the TV.
6 Select [Restart] , then press OK to restart the TV.
Update the TV software
Philips continually tries to improve its products. To ensure your TV is
up-to-date with the latest features and fi xes, we strongly recommend
you update the TV with the latest software.
When available, software updates can be obtained from your dealer
or www.philips.com/support .
What you need
Before updating the TV software, ensure you have the following:
An empty USB fl ash drive. The USB fl ash drive must be FAT or •
DOS-formatted. Do not use a USB hard drive for the software
update.
A PC with Internet access.•
An archive utility that supports the ZIP fi le format (for •
example, WinZip® for Microsoft® Windows® or Stuffl t® for
Macintosh®).
Step 1: Check the current TV software
version
Before updating the TV software, check the current software
version of your TV. If the software version of your TV is the same
as the latest update fi le found on www.philips.com/support , it is not
necessary to update the TV software.
1 Press MENU on the TV remote control.
2 Select [Setup] > [Software update] > [Current software] ,
then press OK . The version of the current software is
displayed.
Step 2: Download the latest software
1 Insert the USB fl ash drive into a USB port on your PC.
2 In your PC, navigate to www.philips.com/support .
3 Find your product and locate the software and drivers
available for your TV set.
4 If the software version is later than the version on your TV,
click the software update.
5 Accept the license agreement, and save the ZIP fi le to the USB
fl ash drive.
6 Using the archive utility, extract ‘autorun.upg’ to the root
directory of the USB fl ash drive.
7 Disconnect the USB fl ash drive from the PC.