& OPERATING INSTRUCTIONS IN BRIEF The remote control Front of the set STANDBY m Standby CLEAR 0-9 SV/V+ Reset/clear Digit buttons 0-9 ’VIDEOPlus+’ programming TIMER k TIMER programming on the set MENU OK Confirm button GPLAY H Rewind/Reverse scanning h Pause/Stop Forward wind/ Forward scanning Programme number Plus/Minus J Cassette eject Mute sound w Headphones socket Playback Rewind/Reverse scanning Forward wind/ Forward scanning Index search RECORD n Record STILL R Still picture INFO
& Programming with ’VIDEOPlus+’ Selecting a TV channel All the information required for programming is encoded in the ’VIDEOPlus+’ code. SV/V+ 1 Press the 2 Enter the entire ’VIDEOPlus+ code’. This code (up to 9 digits) is found next to the start time of a TV programme in your TV guide. If you entered an incorrect code number, clear it with the CLEAR button. 3 If you want to repeat programming at daily or weekly intervals, select the required settings in the ’DAILY/WEEKLY’ line.
OPERATING INSTRUCTIONS PHILIPS 14PV284/05 Congratulations on the purchase of one of the most sophisticated and simple-to-use television/video recorder combinations (TV Combi) on the market. With this TV Combi you can record and play VHS-standard cassettes. Contents 1. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting additional equipment . . . . . . . . . . . . . . . . . . . Emergency interrupt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. INSTALLATION Important for the United Kingdom Connecting the cables This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5A, A.S.T.A. or BSI approved type. 3 Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.
Connecting additional equipment Making standard settings You can also connect additional equipment to the EXTERNAL socket, for instance, a decoder satellite receiver or camcorder. 1 To start, press the buttons D and STOP h C button. Press the menu simultaneously. INSTALLATION v w LANGUAGE COUNTRY AUTO STORE MANUAL STORE SORT PP STORE EN GB 2 Select the required display language in the ’LANGUAGE’ Emergency interrupt line.
Automatic Channel Search 1 Switch on with the buttons D and STOP h C button. Press the menu simultaneously. 2 Select and confirm the line ’AUTO STORE’ . Allocating channel numbers 1 Switch on with the buttons D and STOP h C button. Press the menu simultaneously. 2 Select and confirm the line ’SORT’ . The ’Automatic Channel Search’ function starts.
2. PLAYBACK 1 Insert a cassette into the cassette slot. Tape position/Index search 2 Press the GPLAY playback button. 3 Picture search: Now press the H (rewind) or I (wind) button once or several times. STOP h 4 Interrupt: Press the button. 5 Wind: Stop the tape and press the I H (rewind) or the J Index search: Every time you start to record, the tape is marked with a code mark. button. Press the I button to select the next code mark or the H button for the previous code mark.
3. RECORD 1 Insert a cassette. Programme a recording P p button to select the programme number from which you wish to record, e.g.: ’P 01’ . 2 Use the 3 Press the RECORD n button. 4 Use the STOP h button to stop the recording. 5 If, whilst recording, you want to switch off the TV screen, press the STANDBY m button once. To switch the TV screen on again, press the button.
Programming with ’VIDEOPlus+’ How to enter, check or clear a TIMER block manually All the information required for programming is encoded in the ’VIDEOPlus+’ code. 1 Press the 1 Press the 2 Select a free TIMER block or the TIMER block you want SV/V+ button on the remote control. 3 Clear: Press the ONCE 01 OK 3 If you want to repeat programming at daily or weekly intervals, select the required setting in the ’DAILY/WEEKLY’ line.
4. SPECIAL FEATURES 3 Select the ’DISPLAY’ line. How to read TELETEXT • • • Press the TELETEXT e button to switch the TXT decoder on and off. The TV-VIDEO Combi is now receiving the TXT of the TV channel currently selected. To store the current page, press the OK button. If you want to select an other page, type in the number with the digit buttons 0-9 . • • If you want to superimpose the clock time, press the CLOCK . button. If you want to go to TELETEXT page 100, press the INFO , button.
3 Select ’SLEEPTIMER’ line. D or the C button you can determine the minutes left until switch off in 15 minutes intervals. When you set the time to ’0’ with the CLEAR button the sleep function is switched off. Manual channel search 4 With the 5 Press the MENU button. In certain cases the Automatic channel search may not be able to find all of the TV channels (e.g.: coded TV channels). You can then use this manual method to set the channels.
Before you call an engineer If, contrary to expectation, you experience any difficulty in operating this TV Combi, please call the customer service in your country. You will find the telephone numbers in the enclosed guarantee leaflet. The set does not respond to any button being pressed: • No power supply. • Technical disturbance: disconnect from the mains for 30 seconds, then re-connect. • The power switch on the side panel is switched off. • Child lock is active. Cassette jammed: • Don’t use force.