4D Hue tap Instructions ----~==a? 4 preset scenes Hue tap is a wireless switch for the hue system that triggers light scenes that you have configured in the hue app. You can preset four scenes. IMPORTANT NOTE: Before you can use hue tap, you need to make sure you have installed the latest hue software (app, bridge and bulbs).
Hue tap works without batteries and harvests its energy when its buttons are pressed. PHI UPS =energy To select a light scene, push any button until you hear a clear ''click". Be sure to push the buttons down firmly, so the big button is pressed completely.
1 Update hue app and configure hue tap Check the App Store or Google Play store for updates in the Philips hue app. To configure the hue tap, open the Philips hue app. In the side menu, go to: > Settings >My Devices > Connect new devices >Switches and follow the instructions.
2 Mount hue tap to the wall Surface should be smooth and degreased ... ,, -----' ' I I '' ' ' \ •\ I I I I I I I ' I I I I I I I I ,, _______ ... >.
3 Remove hue tap from mounting plate Use hue tap as a remote switch (optional)
4 Remove mounting plate from the wall : ;-;. ·~ ' < > --·---- // "'-' ',\ , • .. ~ • ; ' I ' I I I '' \ \ \ \ \ ' . , ·• \ '' '' , ' '
EN •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 3 FR ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• I I ES ••••••••••••••••• • •••••••••••••••••••••• •••••••••••••••••••••• •••••••••••••••••••••• •••••••••••••••••• 21
Visit www.meethue.com to learn more about hue and how to use it. APPROBATION: ETL, FCC FCC Statement Contains FCC ID: SZV-PTM215Z This device complies with Part IS of the FCC Rules and with RDD-21 0 of industry Canada. Operation is subject to the following two conditions: I this device may not cause harmful interference, and; 2 this device must accept any interference received, including interference that may cause undesired operation.
IC certificatio n: Contains transmitter module IC: 5713A-PTM 215Z. This Class B digital apparatus complies with Canadian ICES-003. This digital apparatus does not exceed the class B limits for radio-noise emission from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communica tions.
NOTE: This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part IS of the FCC rules. These Limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
• Reorient or relocate the receiving antenna • Increase the separation between the equipment and • rece1ver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help WARNING S AND CAUTION S: • The device is for indoor use only • Do not use the device in wet locations OPERATIN G INSTRUC TIONS • The device is not a toy designed to be played with by children • Do not place the device on hot su
LIMITE D WARR ANTY: Philips warrant s that this device will be free from defects in material and workma nship and will operate for 2 years when used as directed . If this device does not conform to the warrant y, Philips will send you, at its election , a replacem ent device or refund your original purchas e price upon receipt of the returned device, register receipt and proof of purchas e.
states and provinces do not allow exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and province to province. CLEANING AND MAINTENANCE: To avoid scratching, the product should only be cleaned with a soft dry cloth. Do not use cleaning agents to clean the device. Manage in accordance with disposal laws in your area.
Wireless specificatio n: Wireless RF mode frequency band: 2400-2483.5 MHz Wireless communicat ions protocol: IEEE 802.15.4, Zigbee Green Power Operating channels: II, 15, 20 or 25 Range: 15 - 30m, depending on local circumstanc es Do not install hue tap on metal surfaces Environme ntal specificatio n: Temperatur e (operation): -5 ...45°C Temperatur e (Storage): -40 ... aooc Relative humidity: 0 ...
Philips Lighting Company 200 Franklin Square Drive Somerset, NJ 08873 Philips Electronics Ltd. 281 Hillmout Road Markham, ON L6C 2S3 "Hue tap" and "Hue Personal Wireless Lighting" are trademarks owned by Koninklijke Philips N.V.