User Manual

2. Press the Mode Button to access Preset Mode [ PRE ].

3. Using the Up/Down Buttons, select the preset channel (1-6) that you would like to set

for this frequency.

4. Press and hold the Up/Down Buttons until OK appears on the LCD to save your preset.

5. Repeat steps 1 - 3 for all available preset channels (up to six).

NOTE: To cycle through your preset stations, briefly press the Mode Button until you are

in Preset Mode [ PRE ] and cycle through your preset stations using the Up/Down

Buttons.

Charging Cell Phones/PDAs/Gaming Systems or Other USB

Devices

TransDock features a USB port on the bottom of the unit. You can use this port to charge

most USB devices like cell phones or PDAs. See Controls + Connections [pg.6]. Simply

plug in your device with the appropriate cable (available separately).

Watching iPod Videos on a Mobile Video System

If you have a mobile video system in your car, the TransDock will play your iPod video

and audio content over the system, while it charges your iPod. Simply plug in an AV

mini cable (available separately) into the AV-Out port on the bottom of the TransDock

and attach the connectors at the other end to your car’s AV inputs.

IMPORTANT: With your iPod connected to the TransDock, make sure that your iPod

TV Out setting under Video Settings is set to either Ask or On.

Controlling the OLED Backlight

TransDock features an indigo blue backlit OLED display. The backlight comes on

automatically when you power up TransDock, and any time you change frequencies. By

default, the backlight automatically dims after 10 seconds.

You can program the backlight to turn off after a certain period of time (or have it always

on or off) under the Settings Mode on the TransDock. See TransDock Controls Chart [pg.

TransDock Intelligent Power Control

TransDock features Intelligent Power Control. TransDock turns on automatically when

you plug it in to your auto power outlet or connect your iPod, then automatically shuts

itself off when not in use for one minute (i.e. when no player or device is attached). This