Specification

IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a
combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the
supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in
the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product
acceptance by Authorities Having Jurisdiction.
This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material,
manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of
non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing.
Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc.
Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
This certificate is not evidence of current listing. To verify listing status, visit the IAPMO R&T
Product Listing Directory at pld.iapmo.org
Effective Date: March 2019 Void After: March 2024
Product: Drinking Water System Components - Health
Effects
File No. N-10257
Issued To: Kaiping Samliyu Sanitary Co., Ltd.
No. 51-53,
Jiaxing Industrial Estate
Shuikou Town
Kaiping, GUANGDONG
China
Identification: Each product shall be permanently and legibly marked with the manufacturer's
name or trademark. The product may also be marked with the standard
designation "NSF/ANSI 61".
Characteristics: Materials or products that come into contact with drinking water and/or
drinking water treatment chemicals. Products and materials may include
process media, protective materials, joining and sealing materials, pipes and
related products, mechanical devices used with
treatment/transmission/distribution systems, and mechanical plumbing devices.
To be installed in accordance with the manufacturer's instruction. Lead free
requirements are addressed under a separate certificate of listing.
Products listed on this certificate have been tested by an IAPMO R&T
recognized laboratory. This recognition has been granted based upon the