Instructions / Assembly

Table Of Contents

Assembly

Step 1:

Step 3:

Place table top (C) upside down on a flat,

protected surface.

Attache left leg (G), right leg (H), left door leg(I)

and right door leg ( J) to table top (C) with four

M6*12MM bolts (AA). Please use Phillips

head screwdriver (not included). Please do

not tighten any screws to then end at this

step.

Step 2:

Attach side panel (D) to left leg (G) and right leg

(H) with four M6*12MM bolts (AA), Please use

Phillips head screwdriver (not included). Please

do not tighten any screws to the end at this step.

Attach side panel (D) to left leg (G) and left door

leg (I) with four M6*12MM bolts (AA). Please use

Phillips head screwdriver (not included). Please

do not tighten any screws to the end at this step.

Attach side panel with igniter (E) to right leg (H)

and right door leg(J) with four M6*12MM bolts

(AA). Please use Phillips head screwdriver (not

included). Please do not tighten any screws to the

end at this step.

Pull out the control panel and attach it to side

panel with igniter (E) with four M5*10MM bolts(BB)

and M5 Nut(CC).Please use Phillips head screwdriver

(not included). Please do not tighten any screws

to the end at this step.