Life Gets Better With USE AND CARE GUIDE E02GF-039-BU Questions, problems, missing parts? Before returning to the store, please contact our Customer Service service@alphamarts.com THANK YOU We appreciate the trust and confidence you have placed in PHI VILLA through the purchase of our product. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
LIFE GETS BETTER WITH PHI VILLA Table of Contents Table of Contents 2 Pre-assembly Safety Information 2 Assembly Warranty Care and Maintenance What is Covered 2 2 What is Not Covered 2 3 4-5 6 Safety Information • Tighten each bolt firmly and properly. Do not completely tighten screws until all screws are started. • Some parts may contain sharp edges. Wear protective gloves as necessary.
LIFE GETS BETTER WITH PHI VILLA Pre-assembly (continued) Assemble the item on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. NOTE: Identify all parts packed in the carton against the parts list. Remove all the protective material carefully and DO NOT use a knife to prevent scratching the furniture. NOTE: Hardware not shown to actual size.
LIFE GETS BETTER WITH PHI VILLA Assembly T A 1 L C Q C A 2 C A T L Q B 4
LIFE GETS BETTER WITH PHI VILLA Assembly 3 B A C 4 K I 5
LIFE GETS BETTER WITH PHI VILLA Cleaning and Maintenance ● Clean the furniture with damp cloth, rinse thoroughly. Dry frame parts completely. Do not use bleach, acid or other solvents on the wicker or metal parts. ● Inspect and tighten all SCREW on a regular basis to ensure proper performance and safety. ● In order to prolong the life and beauty of your product, we highly recommend storing it in a dry area and protecting it with a furniture cover from the rain and sun directly when not in use.
Life Gets Better With USE AND CARE GUIDE E02GF-040-BU Questions, problems, missing parts? Before returning to the store, please contact our Customer Service service@alphamarts.com THANK YOU We appreciate the trust and confidence you have placed in PHI VILLA through the purchase of our product. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
LIFE GETS BETTER WITH PHI VILLA Table of Contents Table of Contents 2 Pre-assembly Safety Information 2 Assembly Warranty Care and Maintenance What is Covered 2 2 What is Not Covered 2 3 4-5 6 Safety Information • Tighten each bolt firmly and properly. Do not completely tighten screws until all screws are started. • Some parts may contain sharp edges. Wear protective gloves as necessary.
LIFE GETS BETTER WITH PHI VILLA Pre-assembly (continued) Assemble the item on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. NOTE: Identify all parts packed in the carton against the parts list. Remove all the protective material carefully and DO NOT use a knife to prevent scratching the furniture. NOTE: Hardware not shown to actual size.
LIFE GETS BETTER WITH PHI VILLA Assembly 1 T L E Q E D D 2 D E L Q G D G 4
LIFE GETS BETTER WITH PHI VILLA Assembly 3 D E G 4 K I 5
LIFE GETS BETTER WITH PHI VILLA Cleaning and Maintenance ● Clean the furniture with damp cloth, rinse thoroughly. Dry frame parts completely. Do not use bleach, acid or other solvents on the wicker or metal parts. ● Inspect and tighten all SCREW on a regular basis to ensure proper performance and safety. ● In order to prolong the life and beauty of your product, we highly recommend storing it in a dry area and protecting it with a furniture cover from the rain and sun directly when not in use.
Life Gets Better With USE AND CARE GUIDE E02GF-045-BU Questions, problems, missing parts? Before returning to the store, please contact our Customer Service service@alphamarts.com THANK YOU We appreciate the trust and confidence you have placed in PHI VILLA through the purchase of our product. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
LIFE GETS BETTER WITH PHI VILLA Table of Contents Table of Contents 2 Pre-assembly Safety Information 2 Assembly Warranty Care and Maintenance What is Covered 2 2 What is Not Covered 2 3 4-6 7 Safety Information • Tighten each bolt firmly and properly. Do not completely tighten screws until all screws are started. • Some parts may contain sharp edges. Wear protective gloves as necessary.
LIFE GETS BETTER WITH PHI VILLA Pre-assembly (continued) Assemble the item on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. NOTE: Identify all parts packed in the carton against the parts list. Remove all the protective material carefully and DO NOT use a knife to prevent scratching the furniture. NOTE: Hardware not shown to actual size.
LIFE GETS BETTER WITH PHI VILLA Assembly 1 T L E Q E D D 2 D E L Q G D G 4
LIFE GETS BETTER WITH PHI VILLA Assembly 3 D E G 4 K I 5
LIFE GETS BETTER WITH PHI VILLA Assembly 5 6 O J Q T L Q L T O P P O O O J 7 8 S S J J O P 6
LIFE GETS BETTER WITH PHI VILLA Cleaning and Maintenance ● Clean the furniture with damp cloth, rinse thoroughly. Dry frame parts completely. Do not use bleach, acid or other solvents on the wicker or metal parts. ● Inspect and tighten all SCREW on a regular basis to ensure proper performance and safety. ● In order to prolong the life and beauty of your product, we highly recommend storing it in a dry area and protecting it with a furniture cover from the rain and sun directly when not in use.
ASSEMBLY INSTRUCTIONS USER’S MANUAL Before starting assembly: Read all instructions throughly. Open and check boxes for parts list. If any parts are broken or missing call or email customer service. Keep all packaging until you are satisfied with your product. Returns are not accepted without original packaging. Make sure you have ample space for assembly. WARNING: DO NOT FULLY TIGHTEN ALL SCREWS UNTIL ASSEMBLY IS COMPLETE. DO NOT strain yourself.
Assembly Instructions Gas Fire Pit Table DANGER · FLAMMABLE GAS UNDER PRESSURE. LEAKING LP-GAS MAY CAUSE A FIRE OR EXPLOSION IF IGNITED CAUSING SERIOUS BODILY INJURY OR DEATH. CONTACT LP GAS SUPPLIER FOR REPAIRS, OR DISPOSAL OF THIS CYLINDER OR UNUSED LP-GAS. WARNING · FOR OUTDOOR USE ONLY.* DO NOT USE OR STORE CYLINDER IN A BUILDING, GARAGE OR ENCLOSED AREA. WARNING: WHEN CONNECTING FOR USE: · · · Use only in compliance with appliable codes. Know the odor of LP-gas.
Table of Contents Operating Instructions .........................................12-14 Maintenance...........................................................15 Care and Cleaning ................................................15 Troubleshooting ....................................................16 Table of Contents ..........................................................2 Safety Information...........................................................2-4 Pre-Assembly...……………………...…………………….
Safety Information (continued) WARNING: You must provide propane gas and propane cylinder. Use a standard 20 lb. propane cylinder only. Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the Standard for Storage and Handling of Liquefied Petroleum Gas, ANS/NFPA 58. Your local library or fire department should have this book. The pressure regulator and hose assembly supplied with the appliance must be used.
Safety Information (continued) WARNING: Solid fuels shall not be burned in this appliance. The installation must conform with local codes or, in the absence of local codes, ANSIZ223. 1/NFPA54, NFPA58 Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2.
Pre-Assembly PLANNING ASSEMBLY Carefully remove all pieces from the carton and make sure that you have all parts (refer to the hardware and package contents list). If you are missing parts, please contact for further assistance. YOUR OWNER’S MANUAL Keep and store this Owner’s Manual for future reference. It contains important instructions and procedures for safety and maintenance. NOTE: Please read and understand the entire manual before you assemble, operate, or install the fire pit.
Package Contents I J K F C B E D A G H L N M 6
Package Contents PART DESCRIPTION A Leg A B Leg B C Leg C D Leg D E Side Panel With Window F Back Panel G Side Panel H Door I Lid J Fire Glass K Table Top With Burner L Door Knob M N Tank Support Tray 7 QUANTITY 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Assembly 1 Step 1: H Attach Door Knob (L) to Door Panel (H) using one M6 x 12mm Bolt(AA). AA L B Step 2: C A D Attach the Leg (A,B,C,D)to the Table Top by using eight M6*12 Bolts. Do not tighten the bolts at this step. AA Step 3: Attach Side Panel With Window(E) to Leg (A) and Leg (B) by using four M6*12mm Bolts (AA). Attached the control panel to the side panel with window by using four M5*10mm Bolts(CC) and M5 Nut(DD). Do not tighten the bolts at this step.
Assembly (continued) F Step 4: G Attached the Back Panel(F) With Side Panel (G) by using M6x10mm bolts(AA). Do not tighten the bolts at this step. AA B Step 5: C F G Attached the Back Panel(F) to Leg(B). Do not tighten all screws at this step. D A Attached the Side Panel(G) to Table Top(K). Tighten these two bolts. AA Tigten these two bolts Attached the Rray(N) to the Tank Support(M) by using six M6*10mm bolts(AA). Please tighten these six bolts.
Assembly (continued) M Step 7: Attach the Tank Support (M) to Leg (A B C D) by using M6x20mm bolts(EE). Please do not tighten any bolts at this step. EE M Step 8: Connect the Side Panel (G) to Tank Support(M) by using M6x10mm bolts( AA). Please tighten all of the bolts from step 2-8. AA Step 9: Insert the Door(H) to the Side Panel(G), and attach it with one M6x20mm Hex (BB).
Assembly (continued) Step 10: Put the propane tank (not included) into the Tank Support (M). Secure the tank by tighting the screw in the Tank Support(M). Connect the hose and regulator to the propane tank. NOTE: USE A STANDARD 20LB PROPANE TANK ONLY. Step 11: Open the igniter cover and place the AAA battery into it. Then tighten the igniter cover completely. Place the Fire Glass into fire bowl,Ensure fire glass do not cover the ignition portion of the burner . Finish and enjoy your fire pit table.
Operating WARNING: Never use this appliance for other than the intended use. DO NOT use this appliance to prepare food. Initial Lighting: When lit for the first time, the appliance emits a slight odor. This is a normal temporary condition caused by the “burn-in ” of internal paints and lubricants used i n the manufacturing process and does not occur again. Simply run the main burner on high for approximately one-half hour.
Operating (continued) LEAK TESTING OPERATION WARNING: A leak test must be performed annually or if a part of the gas system is replaced. WARNING: Never use an open flame to check for gas leaks. Be certain no sparks or open flames are in the area while you check for leaks. Sparks or open flames will result in a fire or explosion, damage to property, serious bodily injury, or death. LEAK TESTING: 1, Make 2-3 oz. of leak detection solution by mixing one part liquid dishwashing soap with three parts water.
Operating (continued) LIGHTING CAUTION: Keep the outdoor gas appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids. CAUTION: Do NOT obstruct the flow of combustion and ventilation air. CAUTION: Check and clean burner/venturi tubes for insects and insect nests. A clogged tube can lead to a fire. Lighting: 1. Make sure the control knob is in the “OFF” position (Figure A). 2. Fully open LP cylinder valve.
Maintenance Storage between uses: □ Turn the control knob to “OFF” position. □ Disconnect LP source. □ Store heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail, snow, dust and debris). □ If desired, cover heater to protect exterior surfaces and to help prevent build up in air passages. NOTE: Wait until heater is cool before covering. Storage during periods of extended inactivity or when transporting: □ Turn the control knob to “OFF” position.
Troubleshooting PROBLEM PROBLEM CAUSE SOLUTION The flame and heat are low when the valve is turned to high. The propane lighting procedure was not followed correctly. Ensure lighting procedure is followed carefully. The valve must be in the off position when the tank valve is turned on. Turn the tank on slowly to allow pressure to equalize. See Lighting Instructions in the Operating section. Burners burn with yellow flame, accompanied by the smell of gas.
