Enjoy Your USE AND CARE GUIDE E02GR022 This appliance is for Household use only. This is not a commercial appliance. Assembly, Care And Use Instructions Read Carefully Important:Retain These Instructions For Future Reference. GA S TIFIED ER C Questions, problems, missing parts? Before returning to the store, please contact our Customer Service service@alphamarts.com THANK YOU inually create quality products designed to enhance your home.
ENJOY YOUR CAPTIVA DESIGNS Table of Contents Safety Information 2 Troubleshooting 20 21 Warnings 3-5 First-time Operation Package Contents 6-7 Care and Maintenance 22-23 8 Product Specifications 24 Warranty 24 Preparation Assembly Instructions 8-16 Operation Instructions 17-19 Safety Information Assembler/Installer This instruction manual contains important information necessary for the proper assembly and safe use of this appliance.
ENJOY YOUR CAPTIVA DESIGNS Warnings PROP 65 WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which are known to the State of California to cause cancer and birth defects or other reproductive harm.For more information visit www.P65Warnings.ca.gov.
ENJOY YOUR CAPTIVA DESIGNS Warnings This gas grill must be installed in accordance with all local codes. If installation is planned in an area with no local codes, your gas grill must be installed in accord with the National Fuel Gas Code with the National Fuel Gas Code ANSI Z223.1, and storage and handling of CSA B149. 2 propane installation code. This grill is for outdoor use only. The manufacturer cannot be held responsible for damage or injury caused by improper use of this appliance.
ENJOY YOUR CAPTIVA DESIGNS Warnings The self-contained LP system appliance is design-certified to be used with a standard 20-lb., 12 1/4”-diameter, 18”-tall cylinder with right-handed connection threads. This is the maximum size LP tank to be used with this grill. The cylinder must be marked in accordance with the latest U.S. Department of Transportation specifications for LP gas cylinders. (DOT.
ENJOY YOUR CAPTIVA DESIGNS Package Contents 21 25 6
ENJOY YOUR CAPTIVA DESIGNS Package Contents No. Name Qty No.
ENJOY YOUR CAPTIVA DESIGNS Preparation Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list on previous page and hardware contents below. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, Spray bottle, Pliers, Adjustable Wrench Magnetic screwdriver CAUTION: THIS UNIT IS HEAVY.
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions 2 A 20 A M6 x 12 4 pcs 3 11 A 13 A M6 x 12 12 pcs 9
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions 4 21 25 5 12 A 25 A M6 x 12 8 pcs 10
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions 7 6 A A M6 x 12 2 pcs 7 7 8 B C 8 B C B 17 B M4 x 15 4 pcs C Door bolt 2 pcs 11 8
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions 8 14 16 15 D M4 x 6 4 pcs D 9 5 Please remove bottom and two sides shipping protective metal bracket before assembly.
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions 10 26 A 5 A M6 x 12 2 pcs 11 5 A A M6 x 12 4 pcs 13
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions 12 6 23 A A M6 x 12 6 pcs 13 A M6 x 12 4 pcs A A 14
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions 14 23 Step1: Take out the corrugated pipe connect gas tube to side burner. E Step3: Connect the ignition wire. Step2: Insert the corrugated pipe into side burner and fix by E. The hole here between pipe and side burner is correct for mix Oxygen.
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions 16 4 27 17 29 16
ENJOY YOUR CAPTIVA DESIGNS Operation Instructions 3 CHECKING FOR LEAKS After all connection are made, check all connections and fittings on the LP gas tank valve, gas hose and regulator for leaks with a water and soap solution. To prevent fire or explosion while testing for a leak: • Always perform leak test prior to lighting the grill. • Do not smoke while testing for a leak. • Always perform leak tests outdoors in a well-ventilated area. • Do not use the grill until any and all leaks are corrected.
ENJOY YOUR CAPTIVA DESIGNS Operation Instructions 3 CONNECTING GAS CYLINDER The propane gas supply cylinder to be used must be constructed and marked in accordance with the specifications for LP gas Cylinders of the U.S. Department of Transportation(D.O.T) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and Commission, as applicable; and provided with a listed overfilling prevention device. Use only 20-pound cylinders (height: 18.
ENJOY YOUR CAPTIVA DESIGNS Operation Instructions NOTE: Other cylinders may be acceptable for use with this appliance if they are compatible with the appliance nesting hole and retention means. Refer to Page 19 of the Assembly Instructions for correct cylinder to cylinder holder connection. WARNING: ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND/OR INJURY. CONNECTING THE LP TANK 1. The knob on the LP tank must be closed.
ENJOY YOUR CAPTIVA DESIGNS Troubleshooting Problem Solution Possible Cause 1. Carefully follow the lighting procedures outlined on Pages 21. Remember, all gas grill valves must be in the OFF position when the tank valve is turned on. Slowly turn the tank on to allow pressure to equalize. 2. Preheat the grill with main burners on high for 10–15 minutes. Low heat or low flame 1. For propane: improper when valve is turned lighting procedure. to high. Excessive flare-ups/ uneven heat. 1.
ENJOY YOUR CAPTIVA DESIGNS First-time Operation Prior to using your Captiva Designs gas grill, verify that all of the following is true: • The burner tube is free of any debris or obstruction. • The proper gas type, gas connection, and regulator settings have been installed. • You’ve checked for gas leaks. • Minimum clearances listed on certification tag are maintained. • All packaging has been removed. • All parts and components are properly in place.
ENJOY YOUR CAPTIVA DESIGNS Care and Maintenance Cooking Grates The best time to ‘burn-off’ the cooking grates is after every use (approx. 15 minutes). The grill is already hot from cooking thus requiring less fuel to obtain necessary temperature for ‘burn-off’. To ‘burn off’ or heat clean your grill, turn the burners to highest position and run for 15 minutes with the lid closed. Then turn off the burners and use a wire brush to clean excess food residue from the grates.
ENJOY YOUR CAPTIVA DESIGNS Care and Maintenance Burner Assembly Removing The Burner Assembly 1. Make sure all control knobs are in the OFF position, the LP gas supply valve has been closed, and the gas hose is disconnected from the gas supply. 2. Open lid and remove warming rack, cooking grates, heat tents, clip for burner, ignition chain and main burners. 3.Slide the burner forward and out of the firebox. 4.Detach ignition wire from electrode. Cleaning the Burner Assembly – Make sure the grill is cool 1.
GA S FIED RTI CE ENJOY YOUR CAPTIVA DESIGNS Product Specifications Conforms to ANSI Z21.58-2022 CSA 1.6-2022 Certified to CSA 1.6-2022 Outdoor Cooking Specialty Gas Appliance Model No. E02GR022 BTU Type of Gas 46700 BTU Tank Capacity 20 LB Cooking Area 24.2"x14.8" Product Size 48.6"x19.1"x45.1" Net/Gross Weight 63.11Ibs/73.78Ibs 3 Propane Warranty The warranty is for original owners only at the original site of delivery, and cannot be transferred to new owners.
