Open-Ceiling Speaker Specifications Sheet

and be available for 25, 70.7 & 100 Volt
modes with voice coil/4 Ohm direct.
The frequency-dividing network shall
have a crossover frequency of 100 Hz
with a 6 dB per octave (1st order) slope
for the low pass filter. Rated power
capacity shall be at least 150 Watts con-
tinuous power (RMS) and conform to
EIA-426-B testing. Maximum continu-
ous output at 1 meter shall be 112.5 dB.
Installation for the RS1001i-II shall be
by aircraft cable affixed to the speaker
chassis via a carabiner. For seismic &
safety redundancy, a secondary aircraft
cable shall be included and attach to the
speaker chassis via #10 bolt. The exter-
nal wiring input connector shall be a
4-pin, 5 mm Euroblock for 4 Ohm or dis-
tributed systems and shall accept from
10 – 22 gauge wire. The system shall be
for indoor & outdoor applications, and
shall have a weather-resistant terminal
boot covering all wire connectors.
The enclosure shall be constructed of
injection molded, mineral filled, glass
reinforced ABS. The grille shall be con-
structed of iridite-plated, powder-coated
steel for lasting performance in the ele-
ments. Overall cabinet dimensions shall
be no more than 437.6 mm (17.23 in) in
height by 376.4 mm (14.82 in) in diam-
eter. The RS1001i-II shall include hang-
ing hardware, Euroblock connector and
weather-resistant terminal boot.
The system shall be the SoundTube
RS1001i-II subwoofer with hanging
hardware for both low & high imped-
ance applications.
SoundTube Entertainment
6430 North Business Park Loop
Park City, Utah 84098
Phone [phone]
Fax [phone]
Toll Free 800.647.TUBE
www.soundtube.com
All SoundTube products come
with a 5-year limited warranty.
SoundTube Entertainment manufactures a complete line of speakers for:
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing
All SoundTube products are designed and engineered in the USA.
RS1001i-ll
Open-Ceiling Speaker
Technical Information for System Engineers