Open-Ceiling Speaker Specifications Sheet

ManualsBrandsPhase Technology ManualsSpeakerRS1001i-II

Key Features

• One 254 mm (10.0 in) polypropylene

woofer mounted to a proprietary cast-

aluminum M8

™

baffle and heat sink.

• Weatherized components for indoor

& outdoor applications.

• Includes hanging hardware with aircraft

cables and integrated SpeedClamp

™

self-locking cable grip for fast, easy &

secure installation.

• Patented ZeroReflection

™

enclosure tech-

nology for optimal sound reproduction

& cabinet rigidity. Also includes Eurob-

lock connector & terminal weather boot.

• Easy access 5-position selectable tap

switch for 25, 70.7 and 100 Volt applica-

tions with 4 Ohm bypass simplifies

ordering and inventory tracking.

• Iridite-plated steel grille with protective

powder-coated finish for lasting durability.

• 93.5 dB Sensitivity offers high-output

capabilities & reduced amplification costs.

• UL 1480 rev. 5, CE approval (EMC Direc-

tive 89/366/EEC, EN55020, EN55013), Mil-

spec 810 & IEC529 approval pending.

• High-quality black or white paint finish.

Custom paint colors optional.

Description

The RS1001i-II is a 10” subwoofer with

an open-ceiling enclosure design that

delivers additional low-end response (40

Hz) for satellite/subwoofer applications.

The RS1001i-II speaker design incorporates

a low-profile grille, 5-position tap switch

with voice coil/4 Ohm direct. Hanging

hardware is included & features Speed-

Clamp

™

self-locking cable grip for fast,

easy & secure installation.

Applications

Designed for indoor & outdoor back-

ground subwoofer applications, the

RS1001i-II includes a single point mount-

ing system for rapid open-ceiling installa-

tions. True low-end response (40 Hz) and

high sensitivity (90.5 dB 1W/1M) make

the RS1001i-II ideal for additional bass

response in retail, restaurants and other

open-ceiling subwoofer applications.

RS1001i-ll

Open-Ceiling Speaker

Technical Information for System Engineers

SoundTube continually develops new product innovations and improvements. Updates to existing

products without prior notice are an example of SoundTube’s drive for constant improvement.

Specifications: RS1001i-II

System Type

Impedance (nominal)

Sensitivity dB @ 2.83V/1M

Sensitivity dB @ 1W/1M

Distance Factor

Frequency Response (- 3 dB)

Frequency Response (-10 dB)

Max. Program Power

Max. Continuous Power RMS

Max. UL program power

Max. Power SPL @ 1 M

Max. SPL @ x% distortion

Coverage Angle (-6 dB @ 2 kHz)

Coverage Angle (-6 dB @ 10 kHz)

Directivity Fact or (Q )

Directivity Index (DI) dB

Tap Selector

Transducer - Low Frequency Driver

Transducer - High Frequency Driver

Low Frequency Voice Coil

Crossover Frequency

Network Type: Low Pass

Network Type: High Pass

Enclosure Material

Motor-board

Grille

Inputs

Colors

Height (SM = Height)

Diameter (SM = Width)

Weight

Shipping Weight

Accessories

Included

Packaging

10” Subwoofer, open-ceiling, ported (150 Watt optional

transformer for 25/70.7/100 Volt or 4 ohm direct)

4 ohm

93.5dB

90.5dB

N/A

53 Hz - 120 Hz

40 Hz - 300 Hz

300w

150w

100w

112.5dB

N/A

5-Position rotary switch with 4 ohm direct

1 x 254mm (10in) Polypropylene cone, butyl rubber surround

N/A

35.0mm 1.38in

100.0 kHz

6dB per octave, 1st order

N/A

Injection molded ABS, glass fiber reinforced

N/A

Iridite-plated steel with powder-coat finish

4 Pin, 5mm Euroblock for individual or daisy chain connection

Black or white

17.23 in / 437.6 mm

14.82 in / 376.4 mm

27.0 lb / 12.3 kg

32.5 lb / 14.8 kg

Hanging hardware, Euroblock connector & terminal

weather boot

1 per box

Transformer Taps

70.7 V Output 100 V Output 25 V Output

Impedance listed per IEC 60268-5 with

a minimum less than 80% the nominal

impedance

1w1m sensitivity determined using nominal

impedance

Frequency response measured in half or

full space as dictated by speaker mounting

configuration

Max program power is 3 dB above max

continuous power

Continuous power rating, EIA-426-B test

Max output based on max continuous power

Max useable SPL based on testing

by NWAA Labs

150w 112.5dB

75w 109.5dB

38w 106.5dB

19w 103.5dB

150w 112.5dB

75w 109.5dB

38w 106.5dB

19w 103.5dB

9.5w 100.5dB

4.8w 97.5dB

2.4w 94.5dB

Summary of content (4 pages)

PAGE 1
RS1001i- ll Open-Ceiling Speaker Technical Information for System Engineers Key Features Specifications: RS1001i-II System Type 10” Subwoofer, open-ceiling, ported (150 Watt optional transformer for 25/70.7/100 Volt or 4 ohm direct) 4 ohm Impedance (nominal) 1 93.5dB Sensitivity dB @ 2.83V/1M 90.5dB Sensitivity dB @ 1W/1M 2 N/A Distance Factor 53 Hz - 120 Hz Frequency Response (- 3 dB) 3 40 Hz - 300 Hz Frequency Response (-10 dB) 3 300w Max. Program Power 4 150w Max. Continuous Power RMS 5 100w Max.
PAGE 2
RS1001i- ll Open-Ceiling Speaker Technical Information for System Engineers Frequency Response 100.0 180.0 dBSPL Deg 90.0 108.0 80.0 36.0 70.0 -36.0 60.0 -108.0 Patented SoundTube Technologies SoundTube Entertainment is constantly developing new technologies that enhance audio product performance. SoundTube Entertainment innovations are protected by multiple U.S. & international patents, which explicitly cover SoundTube dispersion, enclosure & dome technologies.
PAGE 3
RS1001i- ll Open-Ceiling Speaker Technical Information for System Engineers and be available for 25, 70.7 & 100 Volt modes with voice coil/4 Ohm direct. The frequency-dividing network shall have a crossover frequency of 100 Hz with a 6 dB per octave (1st order) slope for the low pass filter. Rated power capacity shall be at least 150 Watts continuous power (RMS) and conform to EIA-426-B testing. Maximum continuous output at 1 meter shall be 112.5 dB.
PAGE 4