SDS

ManualsBrandsPFERD ManualsAbrasive Wheels1" Crimped Wire End Brush

SAFETY DATA SHEET

Power Wire Brushes – Carbon Steel

SDS #20

1. PRODUCT AND COMPANY IDENTIFICATION

Product Identifier: Power Wire Brushes – Carbon Steel

Identified Uses of the Manufactured Article and Uses Advised Against: Abrasive materials.

Details of the Supplier of the Safety Data Sheet

Manufacturer: PFERD INC.

9201 W. Heather Ave.

Milwaukee, WI 53224, USA

Internet: www.pferd.com

E-Mail: Jim.Sucharski@pferdusa.com

Information Phone: 262-509-5614

Emergency Telephone Number: 1-800-342-9015 (8.00 a.m. to 4.30 p.m. Eastern Time)

SDS Date of Preparation: April 2, 2013

2. HAZARDS IDENTIFICATION

This product is gray-black with no odour.

EMERGENCY OVERVIEW

Dust may cause eye and respiratory irritation. Dust particles may cause abrasive injury to the eyes.

Other Hazards

A greater hazard, in most cases, is the exposure to the dust/fumes from the material being brushed and the

potential hazard from this exposure must be evaluated.

3. COMPOSITION/INFORMATION ON INGREDIENTS

The components listed below represent the chemical composition of the wire material:

Hazardous Component

CAS #

Iron

7439-89-6

95-99

Carbon

7439-44-0

0.01-1.1

Manganese

7439-96-5

0.25-1.65

Silicon

7440-21-3

≤1.6

Chromium

7440-47-3

0.01-1.5

Phosphorous

7723-14-0

≤0.04

Sulfur

7704-34-9

0.001-0.035

Vanadium

7440-62-2

0.01-0.35

Summary of content (6 pages)

PAGE 1
SAFETY DATA SHEET Power Wire Brushes – Carbon Steel SDS #20 1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier: Power Wire Brushes – Carbon Steel Identified Uses of the Manufactured Article and Uses Advised Against: Abrasive materials. Details of the Supplier of the Safety Data Sheet Manufacturer: PFERD INC. 9201 W. Heather Ave. Milwaukee, WI 53224, USA Internet: www.pferd.com E-Mail: Jim.Sucharski@pferdusa.com Information Phone: 262-509-5614 Emergency Telephone Number: 1-800-342-9015 (8.00 a.m. to 4.
PAGE 2
SDS #20 Power Wire Brushes – Carbon Steel (4/13) 4. FIRST AID MEASURES Description of First Aid Measures Ingestion: If dust is swallowed, seek medical attention. Inhalation: If overexposed to dust, remove victim to fresh air and get medical attention. Eye Contact: Flush eyes thoroughly with water, holding open eyelids. Get medical attention if irritation occurs and persists. Skin Contact: Wash dust from skin with soap and water. Launder contaminated clothing before reuse.
PAGE 3
SDS #20 Power Wire Brushes – Carbon Steel (4/13) 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control Parameters: Hazardous Component Iron Carbon Manganese Silicon Chromium Phosphorous Sulfur (as Sulfur Dioxide) Vanadium (as Vanadium pentoxide, as V) OSHA PEL ACGIH TLV Ontario Québec None Established None Established 5 mg/m3 Ceiling None Established None Established 0.02 mg/m3 TWA (Respirable) 0.1 mg/m3 TWA (Inhalable) None Established None Established None Established 0.
PAGE 4
SDS #20 Power Wire Brushes – Carbon Steel (4/13) Autoignition Temperature: Not Applicable Viscosity: Not Applicable Oxidizing Properties: Not an Oxidizer Molecular Formula: Mixture Molecular Weight: Mixture Decomposition Temperature: Not Available Explosive Properties: Not Explosive Relative Density: 7 Flammability (solid, gas): Not flammable 10.
PAGE 5
SDS #20 Power Wire Brushes – Carbon Steel (4/13) Persistence and Degradability: No data available Bioaccumulative Potential: No data available Mobility in Soil: Not applicable Results of PBT and vPvB Assessment: Not applicable Other Adverse Effects: Not applicable 13. DISPOSAL CONSIDERATIONS Waste Treatment Methods: Dispose in accordance with all applicable local, state/provincial and federal regulations. Local regulations may be more stringent than regional and national requirements.
PAGE 6
SDS #20 Power Wire Brushes – Carbon Steel (4/13) This product has been classified under the CPR and this SDS discloses information elements required by the CPR. 16. OTHER INFORMATION NFPA Hazard Rating: Health: 1 Fire: 0 Reactivity: 0 Date Previous Revision: None Date This Revision: 04/02/2013 Revision Summary: New SDS Prepared By: Chandra D Gioiello, CIH IH&SC Inc., Shelton, CT 06484 Dr. Axel Deeg.