Installation Guide

®
PERPLAC AUTOADESIVO is a peel and stick high pressure laminate, for wall applications. With the new concept
adhesive laminate is suitable for fast and easy coating, small or large areas, with a perfect finish.
Available in more than 150 patterns, among solid colors, wood, stones or customized with the image of your choice.
01. Sand, level and clean the wall; 02.
03. Remove the protective back coat 04. Find the right position to apply and press firmly the laminate against the wall.
Measure and cut. Attention: do not remove the back protective coat yet;
Installation Instructions
PERPLAC AUTOADESIVO APPLICATION:
®
The application of Perplac Autoadesivo is much faster than the traditional coatings. In new environments or renovations,
it can be installed on a clean work way, without glue, allowing your flexibility and fast solution.
®
STEP 01
STEP 02
STEP 02
STEP 03
STEP 04
EASY AND FAST. THE END OF THE WASTE.
USES AND APPLICATIONS
®
PERPLAC AUTOADESIVO must be applied to cover walls that are dry and free of moisture.
Manufacturing by Pertech do Brasil
Av. Piraporinha, 852 - São Bernardo do Campo/SP/CEP: 09891-902 - Brazil
www.pertech.com.br
CLEANING AND MAINTENANCE
No use of chemicals, waxe, or varnishes. Daily cleaning is done with a damp cloth and neutral detergent.
Important: Never use abrasive products.
ENVIRONMENT
For storage, it is necessary to have a clean and dry environment (free from dirt and water). Contamination
affects product performance. Mainly, if moisture reaches the back protective coat it will reduce the adhesiveness
®
of the PERPLAC AUTOADESIVO
PANEL DS LLC - Importer / Distributor
1990 NE 163rd street,Suite 209 - North Miami Beach, FL 33162
Contact: phone [phone] email: [e-mail]
www.panelds.com
Please refer to Use and Care Guide/Warranty.
®
Perplac Autoadesivo
PEEL’N STICK
Surfaces for application: Masonry, paint, drywall and wood (MDF or plywood).
Surfaces we do not recommend to apply: tile, wallpaper and vinyl.