Use and Care Manual

Step 8

 Place the 6 pcs of tool hooks on each side shelf end and tighten with nuts. See A.

 Screw (1) M6x12 shoulder screw into the lower hole of each side shelf support bracket. See B

& D.

 For each side shelf, hold the shelf in attachment position on the side of cart. Screw (1) M6x12

shoulder screw through the shelf attachment slot and into the upper hole of each side shelf

support bracket. See C & E.

NOTE: To raise shelf to use position, lift shelf from long side. To lower shelf, grasp by front and

back short sides and raise up slightly, then guide shelf down to collapsed position.