Playpen Barrier Fits openings 28.8” - 145.7” (73cm - 3.7m) IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE. This product complies with safety standard ASTM F1004. AFTER SALES SUPPORT info@childsafetyhelp.com www.permachildsafety.com Product Code: 2747, 2751 For installation video, visit www.permachildsafety.
Playpen Barrier User Guide Parts List A. B. C. D. E. F. G. H. I. 5x Barrier panel 1x Gate panel 1x Top underside wall bracket 1x Top topside wall bracket 2x Lower wall bracket 1x Top cap 1x Bottom cap 8x Screws 7x Corner tubes C D E I A B F G H If any parts are missing do not attempt to use your Playpen Barrier. Please call after sales support to obtain replacements. Only use parts supplied by the manufacturer with your Playpen Barrier.
Playpen Barrier User Guide Safety Information WARNING • Adult Assembly Required • To prevent serious injury or death, securely install gate or enclosure and use according to manufacturer’s instructions. • Never leave child unattended when using this product. • Incorrect installation can be dangerous. • Do not use the safety barrier if any components are damaged or missing. • The safety barrier must not be fitted across windows.
Playpen Barrier User Guide General Assembly Select the appropriate fixing method from the following list. This barrier must only be fixed to a solid and secure surface. To install you will need a Phillips screwdriver, pencil and drill. Timber Plasterboard Hard wall Timber Fixing Drill 1/16” (2mm) pilot holes and use the timber screws provided screwing directly into the timber. Plaster Board Walls Locate timber stud and follow timber fixing instructions.
Playpen Barrier User Guide 1 Adding Extra Panels Align opposite ends of panels, place the corner tube into the top hole first, pull the corner tube up so you can position the bottom of the corner tube into the bottom hole. Unlocked 2 Locked Turn the base knob into locked position to secure panels.
Playpen Barrier User Guide Underside Bracket Wall Assembly Expanded: C Parts Required: 1x Top Underside Wall Bracket C 1x Lower Wall Bracket I E E 1x Bottom Cap G G NOTE: Place Lower Wall Bracket (F) over Corner Tube (J) before assembly.
Playpen Barrier User Guide 1 2 C E 1. Mark screw positions with pencil. 2. Disassemble and screw in Top Underside Wall Bracket (C) and Lower Wall Bracket (E). 3 C G I E A G 3. Reassemble Panel A, Corner Tube (I) and Bottom Cap (G) into Top Underside Wall Bracket (C) and Lower Wall Bracket (E).
Playpen Barrier User Guide Topside Bracket Wall Assembly Parts Required: Expanded: D 1x Top Topside Wall Bracket D B 1x Lower Wall Bracket I E E 1x Top Cap F F NOTE: Place Lower Wall Bracket (E) over Corner Tube (I) before assembly.
Playpen Barrier User Guide 1 2 D E 1. Mark screw positions with pencil. 2. Disassemble and screw in Top Topside Wall Bracket (D) and Lower Wall Bracket (E). 3 D I E B F F 3. Reassemble Panel A, Corner Tube (I) and Top Cap (F) into Top Topside Wall Bracket (D) and Lower Wall Bracket (E).
Playpen Barrier User Guide Operation 1 2 Using one hand place thumb on the button and grip gate with fingers. Slide button and lift gate, then open gate in either direction, when released gate will swing closed automatically. Always check gate is properly closed. Up to 3 panels including the gate may be used in open configurations providing the 2 end panels are securely fixed to a wall with the fixings provided. 90° To enable stay open feature, completely open gate to a 90° angle.
Playpen Barrier User Guide Using Playpen Barrier as Room Divider or Safety Barrier Up to 6 panels including the gate may be used in open configurations providing the 2 end panels are securely fixed to a wall with the fixings provided.
Playpen Barrier User Guide Playpen Assembly 1 2 1 1. Align Panel A and Panel B/C, place the corner tube into the top hole first, pull the corner tube up so you can position the bottom of the corner tube into the bottom hole. 2. Align arrow with hexagon icon. Do this for all corners. 3 Locked 3. Turn the base knob into locked position to secure panels.
Playpen Barrier User Guide Safety Play Mat (Sold Separately) Note: A safety play mat is required if playpen is used with children. The play mat is available separately, contact after sales support for details. Your child’s play mat can now be placed into the playpen and secured to the bottom bars of each panel with the ties. 1. Release corner tube. 2. Place loop of play mat under the playpen. 3. Install corner tube through loop and fix.
Playpen Barrier User Guide Warranty Certificate Congratulations! You have made an excellent choice of this quality product. Our commitment to quality also includes our service. Should you, contrary to expectations, experience defects due to manufacturing faults, we will provide you with a warranty against defects as follows: Warranty The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase.
Playpen Barrier Warranty Card Details: Product Name: Playpen Barrier Product Number: 2747, 2751 Your Name: _______________________________________________________ Address: _________________________________________________________ ________________________________________________________________ Phone:___________________________________________________________ Email: ___________________________________________________________ Date of Purchase: __________________________________________________ Location of Pu
