Manualshelf

Installation Guide

ManualsBrandsPERFORMANCE ACCESSORIES ManualsFlooringWhite 0.62 in. T x 3.3 in. W x 94.5 in. L Base Molding
1
0721_WBInstall P.1
Wall Base Molding Installation
1. Measure the length of the wall where the wall base will be installed.
2. Cut the wall base with a miter saw, circular saw or hand saw to the necessary length.
3. Place the wallbase against the wall and test the t.
4. Nail the quarter round into the wall with nishing nails.
5. Fill nail holes with coordinating putty.
6. Use quarter round to cover the ooring expansion gap at the wall base, if necessary or
preferred.

Summary of content (1 pages)