User's Manual

A4Schools SIA
5
⓭ Line In: For 3.5mm audio line in.
⓮ Belt Clip: Use this to clip the microphone unit to your belt while wearing the headset
microphone if desired.
Remark-*&**: The volume adjustment only for the volume control of the microphone itself.
ii. The Wireless Microphone Main Menu Diagram
iii Wireless Speaker Indicator Introduction
It has 4 indicators(red, blue, yellow and green), one of which is a bi-color (red, green) light.
1. No Light –The speaker is OFF
2. Green Light – The speaker is ON. the speaker may turn ON if Aux input has been
detected (In this case, the speaker shows that it is ON, but no Microphones or BT devices
are connected)
3. Flashing Yellow Light – The microphone pairing mode is being activated and speaker is
pairing to the microphone
4. Yellow Light – The speaker is connected to the microphone – it can be Master, Slave or
both of them
5. Flashing Blue Light –The Bluetooth pairing mode is activated
6. Blue Light– The speaker is connected to the BT device
7. Red – Emergency announcement
8.
Remark:
1. There is a setting input priority, the green light will be lit when there isn’t Bluetooth and
broadcast signal input, the microphone and cable can be input at the same time.