Operation Manual
Table Of Contents
- Important Notices
- Accessing the Camera
- Accessing the Live Video Page
- System Menu
- Using the Network & Security Menu
- Using the Imaging Menu
- Configuring Exposure Settings
- Configuring Focus Settings
- Setting White Balance
- Using Window Blanking
- Configuring Options in the PTZ Menu
- Using A/V Streams Menu
- Events
- Configuring Sources
- Configuring Handlers
- Configuring an Event Handler: Send Email
- Configuring an Event Handler: Upload JPEG to FTP Server
- Configuring an Event Handler: Write JPEG to SD Card
- Configuring an Event Handler: Run Pattern
- Configuring an Event Handler: Go to Preset
- Configuring an Event Handler: Run Tour
- Configuring an Event Handler: Run Scan
- Configuring an Event Handler: Open/Close Relay
- Configuring an Event Handler: Display Overlay
- Configuring an Event Handler: Play Audio
- Configuring an Event Handler: Write Recording to SD Card
- Configuring an Event Handler: Upload Recording to FTP Server
- Deleting an Event Handler
- Analytic Configuration
- Event Stream
- Contacting Pelco for Troubleshooting
Spectra Enhanced 7 Operations Manual, PTZDome Cameras
C6653M-B | 06/20
28
a. Select the zone from the PTZ Zones area.
b. Click Delete Zone.
Configuring Pelco Camera Link
The Pelco Camera Link automatically tracks objects of interest. You can link Pelco’s Optera™ and a
nearby, mounted Spectra Enhanced camera. Optera provides seamless panoramic coverage for total
situational awareness while the Spectra Enhanced with 30x optical zoom provides detail and automatic
object tracking.
When Auto tracking is enabled, Pelco Camera Link acts as an automatic PTZ operator. Pelco Camera Link
uses the analytic information from Optera™ to enable point and zoom so the camera will follow moving
objects in the scene.
To setup Pelco Camera Link:
1. Establish a connection with Optera by specifying the address and credentials of the Optera system.
Enter the IP Address, Username, and Password.
2. Alternatively, you can click the Advanced button to specify the IP Address, Username, Password,
SSL/TLS, and HTTP Port parameters.
3. Click Connect to link the camera with the Optera system.
4. Click Disconnect to disconnect the link between the camera and the Optera system.
5. Configure the Optera Analytics by clicking Go to Optera Analytics™ Page. Once you are at the
Pelco Camera Link configuration page, you can establish a connection by activating and enabling '2-
Camera Tracking' as an Optera Analytic profile, and then return to this page and refresh.
6. Calibrate the connected cameras by clicking the Calibrate button. Doing so will calibrate the
connected cameras so that they know where they are relative to one another.
Using A/V Streams Menu
A/V Streams provides access to Preset Configurations, Video Configurations, Audio Configurations, RTP
Settings, and Smart Compression settings for your device’s video and audio streams.
Selecting Preset Video Configurations
The Video Presets page contains fully-configured video configurations, offering a balance between video
performance and bandwidth. These presets can also be used as a starting point for a custom video
configuration. Video preset configurations can vary depending on the camera model.
Configuring Presets
Current Configuration (custom): This box displays user specified (custom settings) for primary, secondary,
and tertiary streams. Go to Video Configuration > Custom to establish custom video stream
configurations.
Alternatively, select your desired Preset Configurations of High, Medium, or Low and click Save.
Note: Preset Configuration details are displayed in the user interface next to the desired profile.
Preset Configurations include:
l High: Primary Stream H264, 30 IPS, 1920x1080, 6000 kbps | Secondary Stream H264, 30 IPS,
1920x1080, 6000 kbps | Tertiary Stream H264, 30 IPS, 640x360, 1250 kbps