Operation Manual

Spectra Enhanced 7 Operations Manual, PTZDome Cameras
C6653M-B | 06/20
27
g. You can include a pattern, preset, or preset tour in the Scan. At the lower left corner of the
page, select a pattern, preset, or preset tour from the drop-down menu. Click Start to start the
scan. Click the adjacent Stop button to end the scan.
2. To edit an existing scan:
a. Select the scan from the PTZ Scans area.
b. In the Scan Name field, type in the name for the scan to edit.
c. (Optional) Type in a value for the Left Pan Limit, and then click Save as Left Pan Limit.
d. (Optional) Type in a value for the Right Pan Limit, and then clickSave as Right Pan Limit.
Note
: Scan limits are optional. Scan limits will be disabled if the Left and Right Pan limits
are set to the same value.
e. Type in a Speed in Degrees/Seconds.
f. Type in a Dwell Time in Seconds.
g. You can include a pattern, preset, or preset tour in the Scan. At the lower left corner of the
page, select a pattern, preset, or preset tour from the drop-down menu. Click Start to start the
scan. Click the adjacent Stop button to end the scan.
3. To run an existing scan:
a. Select the scan from the PTZ Scans area.
b. Click Run.
c. When appropriate, click Stop.
4. If appropriate, delete an existing scan:
a. Select the scan from the PTZ Scans area.
b. Click Delete.
Configuring Pan/Tilt/Zoom Zones
From the PTZ Zones page, you can create zones. When the camera is in view of a zone, the zone name
will appear as an Intelligent On Screen Display (OSD). Click Manage OSDi Settings to configure the
Current Zone Label on the OSDi page and enable this feature.
1. To create a new PTZ Zone:
a. Click New Zone.
b. In the New Scan area of the window, type in a Zone Name.
c. Use the pan, tilt, and zoom controls to select the Zone Position.
d. Click Save.
2. To edit an existing zone:
a. Select the zone from the PTZ Zones area.
b. Make the changes in the Edit Zone area.
c. Click Save.
3. If appropriate, delete an existing zone: