User's Manual

User's Manual 2-9



If you need to restart the tablet, tap Power and then select Restart in the
Settings charm.

Slee p Mode

If you have to interrupt your work, you are able to turn off the power without
exiting from your software by placing the tablet into Sleep Mode. In this
mode data is maintained in the tablet's main memory so that when you turn
on the power again, you can continue working right where you left off.

Your system supports Connected Standby function, which starts working
after your tablet goes into Sleep Mode. Connected Standby function is to
provide a constant connectivity while delivering long battery life, and at the
same time, some activities are allowed to run to ensure that the supported
Connected Standby scenarios (for example, receiving emails, updating tiles
alive with fresh content, downloading/uploading a file from/to a website,
and playing music) are functioning properly.


When you have to turn off your tablet aboard an aircraft or in places where
electronic devices are regulated or controlled, always completely shut
down the tablet. This includes turning off any wireless communication
functionalities, and cancelling settings that reactivate the tablet
automatically, such as a timer recording function. Failure to completely shut
down the tablet in this way could allow the operating system to reactivate
and run pre-programmed tasks or preserve unsaved data, which could
interfere with aviation or other systems, possibly causing serious injury.


Before entering Sleep Mode, be sure to save your data.
Do not switch to Sleep Mode while transferring data to external media,
such as USB devices, memory media or other external memory
devices. Data will be lost.


When the AC adaptor is connected, the tablet will go into Sleep Mode
according to the settings in the Power Options (to access it, tap
Desktop Assist -> Control Panel -> System and Security -> Power
Options under TOSHIBA group in the Apps view).
To restore the operation of the tablet from Sleep Mode, press the
power button.
If the tablet enters Sleep Mode while a network application is active,
the application might not be restored when the tablet is next turned on
and the system returns from Sleep Mode.
To prevent the tablet from automatically entering Sleep Mode, disable
Sleep Mode within the Power Options.