Specification Sheet

STANDARD SPECIFICATIONS
• Tub/Shower. Requires 1 1/2" wall cavity.
1/2"
(13 mm)
Face of plasterguard
should be flush with
finish wall line
Maximum Allowable
Deviation
Supply
2 3/4"
(71 mm)
C\L supply lines
3 1/2"
(89 mm)
7"
(178 mm)
P188775
TUB/SHOWER FAUCET
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
Indicates compliance to
ICC/ANSI A117.1 - Valve control only
• ASSE 1016
WARRANTY
PSP-B-P188775 Rev. D
8"
(203 mm)
Min.
18"
(457 mm)
Max.
• Valve has back-to-back installation capability.
• Field adjustable means to limit handle rotation into
hot water zone. Per ASSE 1016.
• Temperature control to rotate a maximum of 120
from full cold to the maximum temperature.
0
• Single Handle.
• Pressure Balance.
• Temperature Only Controlled with Handle.
2 15/32"
(63 mm)
• Lever Handle Tub/Shower, model P188775.
• Forged brass body.
• Slip-on tub spout.
*1/2*-14 threaded tub spout with
slip-on adapter included
RP44121▲
Full Spray
RP70537▲
3 23/32"
(95 mm)
6 3/32"
(155 mm)
5 11/32"
(136 mm)
2 15/32"
(62 mm)
RP71609▲
5 11/32"
(136 mm)
2 15/32"
(62 mm)
2.0 GPM Max.
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
( )
G
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
( )
7
26.5
Tub Filler
30.3
34.1
8
9
Showerhead
2.0 GPM
▲ Designate Proper Finish Suffix
• Lifetime limited warranty on parts (other than
electronic parts and batteries) and
inishes; or,
for commercial users, for 5 years from the date
of purchase.
• 5 year limited warranty on electronic parts (other
than batteries); or for commercial users, for 1 year
from the date of purchase. No warranty is provided
on batteries.