Installation Guide

ManualsBrandsPeerless ManualsKitchenCore 4 in. Centerset 1-Handle Bathroom Faucet in Chrome

Estimated Time For Assembly

The estimated time to install this faucet is 45 minutes. The estimated time

to install the pop-up assembly is 30 minutes. These estimates do not

include removing the old faucet and pop-up assembly.

Tiempo Estimado para Instalar

El tiempo estimado para instalar esta llave de agua es 45 minutos. El

tiempo estimado para instalar el ensamble del desagüe automático es 30

minutos. Estos estimados no incluyen el tiempo que toma quitar la llave

de agua vieja y el ensamble del desagüe automático.

Durée d’installation estimée

La durée d’installation de ce robinet est estimée à 45 minutes. La durée

d’installation estimée du renvoi mécanique est de 30 minutes. Ces

estimations n’incluent pas la dépose du vieux robinet et du vieux renvoi.

Allow clearance for lift rod and handle movements.

Permita un espacio para los movimientos de alzar la barra y la manija.

Laissez le dégagement nécessaire aux mouvements de la tirette et des manettes.

Sink Hole Dimensions

Dimensiones del Hoyo Lavamanos

Dimensions des orifices de l’évier

Record Your Model Number Here For Future Reference

Anote Aquí Número del Modelo Comprado Para Referencia Futura

Inscrivez le numéro de modèle ici pour pouvoir le retrouver.

Instruction Manual Printed in China

Manual de Instrucciones Impreso en China

Manuel d’instructions Imprimé en Chine

1 66399 Rev. A

1-1/8" Max

(29 mm)

(102 mm)

2" Max

(51 mm)

1" Dia.

(25 mm)

1-1/8" Dia.

(29 mm)

SINGLE HANDLE LAVATORY FAUCET

MODELS P130LF, P131LF, P135LF, P136LF, P136LF-M

LLAVE DE LAVAMANOS DE UNA MANIJAS

MODELOS P130LF, P131LF, P135LF, P136LF, P136LF-M

ROBINET À UNE MANETTE POUR LAVABO

MODÈLES P130LF, P131LF, P135LF, P136LF, P136LF-M

You may need

Usted puede necesitar

Articles dont vous pouvez avoir besoin:

Silicone sealant:

(NOT PROVIDED)

If sink is uneven use silicone sealant under base

of faucet.

Sellador de silicón:

(NO PROPORCIONADAS)

Si el lavamanos está desnivelado use sellador de

silicón debajo de la base del borde.

Composé d’étanchéité à la silicone :

(NON FOURNIS)

si la surface de l’évier est inégale, appliquez du

composé d’étanchéité à la silicone sous la base

du robinet.

Wrench(es):

(NOT PROVIDED)

For faucet removal/installation.

Llave(s):

(NO PROPORCIONADAS)

Para quitar/instalación de fregaderos.

Clé(s):

(NON FOURNIS)

pour pose et dépose de robinet

Water supply hook-ups:

(NOT PROVIDED)

Choose hook-ups for 1/2" I.P.S. connections: Ball

nose riser (3/8" O.D. copper tubing), or

1/2" I.P.S. faucet connector.

Suministros de agua:

(NO PROPORCIONADAS)

Escoja conexiones para I.P.S. de 1/2": Tubos

montante bola-nariz (tubería de cobre de 3/8"

D.E.), o conector de llave I.P.S. de 1/2".

Raccords :

(NON FOURNIS)

Choisissez des raccords compatibles 1/2 po IPS.

Tubes-raccords à portée sphérique (tube en cuivre

3/8 po d.e.) ou raccords de robinet 1/2 po IPS.

The Peerless

Installation Helpline

1-800-438-6673

www.peerless-faucet.com

ASSEMBLY PARTS LIST

LISTA DE PIEZAS PARA LA INSTALACIÓN

LISTE DES PIÈCES

Description

Descripción

Description

Quantity

Calidad

Quantité

Faucet

Llave

Robinet

Gasket

Empaque

Joint

Mounting Washers & Nuts

Arandelas de Montaje y Tuercas

Rondelles et Écrous

Coupling Nuts

Tuercas de Acoplamiento

Écrou de Raccordement

Lift Rod

Barra de Alzar

Tige de Manoeuvre

P138LF-M

P131LF

Pop-Up

Desagüe automático

Renvoi Mécanique

11/16/10

ASME A112.18.1 / CSA B125.1

ASME A112.18.2 / CSA B125.2

P135LF

P130LF

P136LF

P136LF-M

ET P138LF-M

Y P138LF-M

& P138LF-M

Summary of content (8 pages)

PAGE 1
SINGLE HANDLE LAVATORY FAUCET MODELS P130LF, P131LF, P135LF, P136LF, P136LF-M & P138LF-M LLAVE DE LAVAMANOS DE UNA MANIJAS MODELOS P130LF, P131LF, P135LF, P136LF, P136LF-M Y P138LF-M ASME A112.18.1 / CSA B125.1 ASME A112.18.2 / CSA B125.2 ROBINET À UNE MANETTE POUR LAVABO MODÈLES P130LF, P131LF, P135LF, P136LF, P136LF-M ET P138LF-M Record Your Model Number Here For Future Reference Anote Aquí Número del Modelo Comprado Para Referencia Futura Inscrivez le numéro de modèle ici pour pouvoir le retrouver.
PAGE 2
Peerless® Lifetime Faucet and Finish Limited Warranty All parts and finishes of the Peerless® faucet are warranted to the original consumer purchaser to be free from defects in material & workmanship for as long as the original consumer purchaser owns their home. Peerless Faucet Company recommends using a professional plumber for all installation & repair.
PAGE 3
RP70194Ÿ Handle w/Set Screw & Button Manija con Tornillo de Ajuste y Botón Manette avec Vis de Calage et Bouton RP70204 Knob Handle w/Button, Screw, Connector and Set Screw Perilla con Botón, Tornillo, Conectador y Tornillo de Ajuste Manette Sphérique avec Bouton, Vis et Vis de Calage 1 Adjusting Ring Anillo de Ajuste Anneau de Réglage RP44123Ÿ Repair Kit Equipo/Herramientas para reparaciones Kit de réparation RP70203Ÿ Lift Rod Barra de Alzar Tige de Manoeuvre 3 Ball Assembly Ensamble de la Bola Rotu
PAGE 4
Care Instructions Care should be given to the cleaning of this product. To clean: Wipe gently with a damp cloth. Blot dry with a soft towel. WARNING: SCRUBBING BUBBLES ® BATHROOM CLEANER and LYSOL ® BASIN TUB AND TILE CLEANER must not be used on the clear knob handles and levers. Use of these cleaners can result in cracked or severely damaged handles. If overspray gets onto the handles, immediately wipe them dry with a soft cotton cloth.
PAGE 5
1 2 1 2 1 2 1 2 SHUT OFF WATER SUPPLIES. Disconnect and remove old faucet. Place gasket (1) on bottom of new faucet. Assemble nuts (2) to studs. Place faucet through mounting holes in sink. Slide washers (1) in place under sink and between nuts, with slotted openings around tubes. Secure faucet to sink by tightening nuts (2) with a wrench. For metal pop-up installation refer to steps 3A-3D; for plastic pop-up installation refer to steps 4A-4D; for grid strainer installation refer to steps 5A-5D.
PAGE 6
3D 3C 3 4 4 5 1 5 2 2 3 1 6 Remove pivot nut (1). Install horizontal rod (2) and stopper (3) as removable (4) or non removable (5). Hand tighten pivot nut (1). Attach horizontal rod (1) to strap (2) using clip (3). Insert lift rod (4) into strap and tighten screw (5). Connect assembly to drain (6). Enlevez l’écrou du pivot (1). Installez la tige horizontale (2) et la bonde (3) de manière que la bonde soit amovible (4) ou non amovible (5). Serrez l’écrou (1) du pivot à la main.
PAGE 7
4D 4C 4 5 4 3 5 2 2 1 3 1 6 Remove pivot nut (1). Install horizontal rod (2) and stopper (3) as removable (4) or non-removable (5). Hand tighten nut (1). Attach horizontal rod (1) to strap (2) using clip (3). Install lift rod (4), tighten screw (5). Connect assembly to drain (6). Quite la tuerca del pivote (1). Instale la barra horizontal (2) y el tapón (3) como desmontable (4) o fijo (5). Apriete la tuerca mano (1). Conecte la barra horizontal (1) a la barra chata (2) usando el gancho (3).
PAGE 8
5C 5D C. 1 1 2 Apply silicone sealant to underside of grid flange (1). Insert grid strainer assembly (2) up through bottom of lavatory. Screw grid flange back on and secure. Pull grid strainer straight down into drain hole and secure gasket, washer and nut (1). DO NOT TURN GRID STRAINER WHILE TIGHTENING NUT OR SEALANT MAY NOT SEAL DRAIN. REMOVE EXCESS SEALANT. Connect assembly to drain. Aplique sellador de silicón a la parte de abajo del reborde de la rejilla (1).