User's Manual

ISSUED: 09-19-05 SHEET #: 055-9441-5 10-31-08
Visit the Peerless Web Site at www.peerlessmounts.com
7 of 12
For customer care call 1-800-729-0307 or 708-865-8870.
3/8 -16 THREADED ROD
(NOT INCLUDED)
Thread two 3/8-16 hex thin nylon-insert locknuts (not included) on two 3/8-16 threaded rods (not included) to the
desired height of projector mount assembly. Attach projector mount assembly (A) to the two 3/8-16 threaded rods
using two 3/8-16 hex thin nylon-insert locknuts as shown in figure 4.1 or figure 4.2.
A
Installation to Threaded Rod
(Not evaluated by UL - Professional installation only)
3/8 -16 THREADED ROD
(NOT INCLUDED)
A
3/8 -16 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
4
3/8 -16 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
3/8 -16 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
3/8 -16 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
FRONT OF
MOUNT
FRONT OF
MOUNT
fig. 4.1
fig. 4.2