IP Phone User Manual

1.1 Incoming Call Features
Feature Guide 37
1.1.3.2 Ring Tone Pattern Selection
Description
A ring tone pattern can be selected for each incoming call type on a Ring Tone Pattern Table
basis, which can be assigned for each extension.
[Ring Tone Patterns]
[Programming Example of Ring Tone Pattern Table]
There are a specified number of programmable tables each of which allows the assignment of
ring tone patterns for the following incoming call types:
For trunk calls (including trunk call hold recalls) and doorphone calls, select ring tone patterns
on a trunk group or a doorphone port basis.
Each extension can select one of the tables.
Conditions
•"PT Ring off Setting" can be enabled or disabled through system programming. If
disabled, PT users cannot set the ring off.
Table
No.
Intercom
Call/Hold
Recall
Trunk Call/Hold
Recall
Doorphone Call
Timed
Reminder
Call
Back
LCS
TRG1 TRG2 ... Port 1 Port 2 ...
1 Double Single Single
2 Single Double Double
:: :::::::::
1 280 ms
S
ingle
D
ouble
T
riple
S
-Double