IP Phone User Manual

1.1 Incoming Call Features
32 Feature Guide
1.1.1.7 Intercept Routing—No Destination
Description
Provides automatic redirection of an incoming trunk call which does not have a destination
assigned. The intercept destination is an operator (tenant/PBX) ( Operator Assignment [006]
*For PBX operator only).
Conditions
• Intercept Routing—No Destination on/off
The Intercept Routing—No Destination feature can be enabled or disabled through system
programming.
If disabled, reorder tone will be sent to the caller. However, the Intercept Routing—No
Destination feature always works for calls through the LCOT or T1 (LCOT/GCOT) card
even when disabled.
• If an operator (tenant/PBX) is not assigned:
The lowest jack numbered extension will be the intercept destination.
• Intercept Routing—No Destination also applies to:
Calls from doorphones.
Feature Guide References
2.2.5 Operator Features