IP Phone User Manual

1.9 Automatic Route Selection (ARS) Features
116 Feature Guide
5. Carrier Table Assignment
A specified number of carriers can be programmed. Assign the following items for each
Carrier Table:
Carrier Name : Assign the carrier name.
Removed Number of Digits : Assign the number of digits to remove from the beginning
of the user-dialled number.
Carrier Access Code : Assign the code to access the carrier.
Trunk Group : Assign the trunk groups which connect to each carrier.
Modify Command : Assign the commands to modify the dialled number to access the
carrier.
[Command Explanation]
[Programming Example]
Command Description
Number Add the number.
C Add the Carrier Access code.
P Analogue Line: Insert a pause.
ISDN/T1/E1 Line: Insert a pause and change to tone (DTMF) signal.
A
Add the Authorisation code for a tenant ( ).
G
Add the Authorisation code for a trunk group ( ).
I
Add the Itemised Billing code ( ).
H Add the dialled number after the digits are removed (Home position).
*1
:
ARS Carrier Name [350]
*2
:
ARS Removed Number of Digits for Carrier Access [352]
7
8
9
10
11
12
13
14
15
A telecom
6
0077
1, 2, 3
CH#12
Carrier Name
*1
Removed Number of Digits
*2
Carrier Access Code
*3
Trunk Group
*4
Modify Command
Carrier Table
7
9
10
11
[Example]
Dialled number: 0123456789
(Trunk Access no. is ignored.)
Modification:
012345 6789 0077 6789 #12
Remove 6 digits.
9
12
Add the Carrier Access
code ( ).
C
H
8
12
B telecom
0
0088
1, 2
CH
#12
Add the number.
1
2
10