ENG 1 2015-04-28 #:150-9052-3 (2017-07-12)
WARNING ENG - Do not begin to install product until you have read and understood the instructions and warnings contained in this user guide. This product is designed to be installed on wood stud, solid concrete or cinder block walls. Hardware is included for wood stud, solid concrete and cinder block installation. Before installing make sure the supporting surface will support the combined load of the equipment and hardware. Screws must be tightly secured.
ENG Tools Needed for Assembly. ENG To properly tighten screws: Tighten until screw head makes contact, then tighten another 1/2 turn. Do not overtighten screws.
ENG Parts (Before beginning, make sure you have all parts shown below). Parts List Description A kiosk BLK kiosk SLV B M5 x 12mm pan phl screw C M5 X 25mm pan phl screw D M6 x 12mm pan phl screw E M6 x 25mm pan phl screw F M8 x 12mm pan phl screw G M8 x 25mm pan phl screw H M5/M4/M6 multi washer I 1/4"spacer J key K 4mm allen wrench L 8mm concrete anchor M #14 x 2.
A (1) B (4) kiosk C (4) M5 x 12 mm M5 x 25 mm D (4) E (4) M6 x 12 mm M6 x 25 mm F (4) G (4) M8 x 12 mm M8 x 25 mm J (2) K (1) key L (4) allen wrench H (4) 8mm concrete anchor I (4) spacer M5/M4/M6 washer M (4) N (2) #14 x 2-1/2" wood screw adaptor bracket O (1) power strip P (6) cable tie 5 2015-04-28 #:150-9052-3 (2017-07-12)
ENG This page intentionally left blank.
1 J (2) A 2 A 7 2015-04-28 #:150-9052-3 (2017-07-12)
3 ENG Concrete/Cinder block. ENG Wood stud wall. 3b 3a 3a WARNING ENG - When installing Peerless wall mounts on a wood stud wall covered with gypsum board (drywall), verify that the wood studs are a minimum of 2" x 4" nominal size. Do not install over gypsum board thicker than 5/8". 3a-1 ENG Use stud finder to locate and mark stud center lines. 3a-2 A ENG Level wallplate. Mark mounting holes on stud center lines.
3a-3 2.5" (64mm) 5/32" (4mm) 5/32" (4mm) ENG Drill mounting holes into supporting surface (2.5" (64 mm) minimum depth required). ENG Mounting hole must center on stud. 3a-4 ENG Level wallplate. Install using wood screws provided. 3/8" (10mm) A ENG Maximum 80 in. • lb (9 N.M.).
3b WARNING ENG - When installing Peerless wall mounts on a concrete wall, the wall must be at least 8" thick with a minimum compressive strength of 2000 psi. When installing Peerless wall mounts on a cinder block wall, the cinder blocks must meet ASTM C-90 specifications and have a minimum nominal width of 8". Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" (25 mm) minimum from the side of the block.
3b-3 L ENG Insert anchor flush to concrete. L (4) 3b-4 ENG Maximum 80 in. • lb (9 N.M.). 3/8" (10mm) ENG Level wallplate. Install using concrete anchors and wood screws provided.
4 X ENG Center adaptor brackets vertically on back of screen. N (2) X 5 x3 ENG Use of spacers is optional.
6 7 ENG Note: Mounting Arm swings out to access adapter brackets and behind display 13 2015-04-28 #:150-9052-3 (2017-07-12)
8 K 14 2015-04-28 #:150-9052-3 (2017-07-12)
9 10 J (2) A KIP640, KIP640-S, KIP642, KIP642-S, KIP643, KIP643-S, KIP646, KIP646-S, KIP647, KIP647-S, KIP648, KIP648-S, KIP649, KIP649-S, KIP655, KIP655-S 15 2015-04-28 #:150-9052-3 (2017-07-12)
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal use, for a period of five years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product's manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
