Operation Manual

34


1. To save a preset you have edited, first press and hold the Preset Encoder for 2 seconds, then release.
The screen will now look like Fig 1. You can now rename and save your preset.
2. In this mode, the bottom row on the display scrolls through different commands. In this example, the
display reads “Turn Stomp=NEXT BANK” meaning that the inst/stomp encoder is used to quickly scroll
through the banks allowing you to choose the desired bank in which to save the current preset (See Fig. 2).
3. The amplifiers and effects encoders are used to rename the preset. Use the amplifiers encoder to move
the cursor and use the effect encoder to change the chosen character (See Fig 3 and Fig 4).
To save the preset, simply press the PRESET ENCODER.


Fig 1
Fig 2
Fig 3
Fig 4
0
7
8
1
2
3
4
5
6
10
11
9
12
13
1%
50%
100%
inst/stomp amplifiers effects
aux inUSB phones
preset name
turn to search
press to select
P1 P2 delay feedback delay level reverb level
push to select channel/
hold for tuner/menu
push to edit/hold to bypass push to edit/hold to bypass
edit mode
pre-gainmodel presetspresets low mid high post-gain master
guitar
input
power
sponge
looper
tap tempo
VIP-3
VYPYR
®