User Manual

4.Front Panel Operation
9
4. Front Panel Operation
4.1 Turn On/Off the Channel Output
Press the orange ON/OFF key to turn on/off the Channel 1 output.
Press the blue ON/OFF key to turn on/off the Channel 2 output.
Press the ON/OFF CH3 key to turn on/off the Channel 3 output.
4.2 Set the Output Voltage/Current
4.2.1 Set the Output Voltage
 Set the output voltage of CH1
Press the orange Volt/CV key, the first digit of the CH1 set voltage is flashing,
indicating the value is editable. There are two methods to change the value.
Modify: Turn the knob to change the value. Press the
＜
/
＞
key to move the
cu rso r. Press the knob or the key to confirm.
Input: Use the numeric keys to input, the input box of Channel 1 output voltage will
pop up. Enter a desired value. Press the key to confirm.
 Set the output voltage of CH2
Press the blue Volt/CV key to enter edit mode. You can set the value in the same way
as CH1 above.
 Set the output voltage of CH3
Press the Volt CH3 key to enter edit mode. You can set the value in the same way as
CH1 above.
4.2.2 Set the Output Current
 Set the output current of CH1
Press the orange Curr/CC key, the first digit of the CH1 set current is flashing,
indicating the value is editable. There are two methods to change the value.
Modify: Turn the knob to change the value. Press the
＜
/
＞
key to move the
cu rso r. Press the knob or the key to confirm.
Input: Use the numeric keys to input, the input box of Channel 1 output current will
pop up. Enter a desired value. Press the key to confirm.
 Set the output current of CH2