Datasheet

13.2. Full Screen
Switch to full screen state, the menus on right of screen and the parameters on the left of screen will
both disappear.
Pressing this key again will exit the full screen state and easy for user to watch the detail trace
information.
13.3. Active Fctn
Select the position in which the active function is displayed for convenient view of the trace.
Optional is Top, Center, Bottom, the default is Top.
13.4. Screen Off
Turn on or off the display, the default is On.
14. Preset
When this key pressed, the system will return to Factory settings or user defined state.
15. System Setup
Set the parameters on system.
15.1. Language
Select Chines or English for display language.
15.2. Reset
The function includes: select the instrument setting (Last or Preset) to be recalled after the analyzer
is powered on. Set the type for Preset (“Factory Setting” or User Defined). Save the system setting.
1. Power On
Set the power on setting to Last or Preset
 If Last is selected, settings before ths last power-off will be recalled when power on.
 If Preset is selected, settings defined in the Preset Type will be recalled when power on.
2. Preset Type
Select the preset type to “Factory Setting” (default) or “User-defined”.
 If select the power on for preset, the analyzer will recall the preset when power on.
 After power on, you can press Preset key to recall the specified Preset Type under any
operation menu.
3. Save Preset
Save the current instrument settings.
-40-