Datasheet
16.10. Max Hold:
Enables or disables the Max Hold, default is Off. When enabled, the function of which is same as the
one of Trace.
16.11. % Pwr :
Sets the occupied bandwidth percentage, that is the percentage of signal power occupied within
integral bandwidth power.
OBW Span:
Sets the integral frequency range in main channel, span will be set as the integral bandwidth
16.13. n dB:
Sets the n dB value for calculates the transmitting bandwidth
16.14. Limits:
The menu includes OBW, CW Offs and ACP
16.15. OBW:
Sets the limitation to Occupied Bandwidth
16.16. CW Offs:
Sets the limitation to frequency offset
16.17. Chain Pwr:
Sets the limitation to channel power
Chapter 3 Remote control
Users can control this series of digital Spectrum Analyzers through USB, LAN and RS-232 remote
interface. This chapter introduces the basic information and method of remote control of the
instrument.
The contents of this chapter are as follows:
Remote control overview (refer to the Spectrum Analyzer software instructions)
Remote control method (refer to the Spectrum Analyzer software instructions)
-43-