Datasheet

1. Safety introduction
This product complies with the requirements of the following European Community Directives:
2004/108/EC (Electromagnetic Compatibility) and 2006/95/EC (Low Voltage) as amended by
2004/22/EC (CE-Marking).
To ensure safe operation of the equipment and eliminate the danger of serious injury due to short-
circuits (arcing), the following safety precautions must be observed.
Damages resulting from failure to observe these safety precautions are exempt from
any legal claims whatever.
Before operating this instrument, read the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. For safe operation, be sure to operate this
instrument in accordance with the provisions.
 Use proper power cord
Only power cord that is recognized by the country where this instrument is located is allowed.
 Reliable grounding
This product is grounded through the grounding wire of the power cord. To avoid electrical
shock, before connecting any input or output terminal of the product, make sure reliable
connection between the grounding terminal of the power cord of this product and protective
earth terminal.
 Check all terminal ratings
Check all ratings and markings on the product to avoid the impact of fire and excessive current,
please consult the manual for further ratings information before any connections.
 Overvoltage protection
Ensure that no excessive voltage (such as voltage caused by lightning or other large voltage)
reach the product. Otherwise the operator may have a risk of electric shock.
 Do not operate without cover
Do not operate the Spectrum Analyzer with covers or panels removed.
 Use proper fuse
Only fuse specified by the Spectrum Analyzer is allowed.
 Do not expose circuit
Do not touch exposed connectors and components when the unit is powered.
 Do not operate with suspected failures
 If you suspect a failure of this product, please contact PEAKTECH authorized maintenance
personnel to detect. Any maintenance, adjustment or parts replacement must be performed by
PeakTech
®
authorized maintenance personnel.
 Keep proper ventilation
Try to ensure good ventilation, bad ventilation will cause temperature increase of the instrument,
thereby causing damage to it. Keep good ventilation when operating, check the vents and fan
regularly.
-1-