Datasheet

1. Single
Set the sweep mode to Single and the number 10 in parameter icon shows the current sweep
number.
2. Continue
Set the sweep mode to Continue. The “Cont” in parameter icon denotes the analyzer is sweeping
continuously.
Key points:
 In single mode, when pressed, the system enter into continue sweep mode and will sweep
when trigger condition allows.
 In continue mode, the system send initialization signal automatically and enter into the judement
program directly when each sweep finishes.
6.3. Single
In single sweep mode, the menu is used for the initialization of trigger. After executing, the system
will sweep (or measure) as specificed numbers when trigger condition allows.
Key points:
 In continue mode, when select Single menu, the system enter into signle sweep mode and will
sweep with specified numbers when trigger condition allows.
 If the sytem has been already in signle mode, selecting this menu will make anlalyzer sweep (or
measure) as specified number when trigger condition allows.
 In single sweep mode, the system needs to execute the trigger initialization first and then judge
the trigger condition.
-25-