Datasheet

Parameter setting
Realize parameter input with numeric keys, adjusting knob or direction keys. This section
introducs thress parameter setting methods with an example (set center frequency to 1500
MHz).
1. Use numeric keys
1) Press FREQ  Center frequency;
2) Use numeric keys to input value “750”;
3) Select desired unit “MHz” from the unit menu that pops up.
2. Use adjusting knob
In the parameters editable state, turn the knob to increase (clockwise) or decrease (counter-
clockwise) parameters at specified steps.
1) Press FREQ Center frequency;
2) Turn the knob to get desired parameter value (750 MHz).
3. Use direction keys
In the parameter editable state, the direction keys can be used for the progressive increment or
decrement of the parameter value according to a certain step.
1) Press FREQ  Center frequency;
2) Press the up / down direction key to get desired parameter value (750 MHz).
-10-