Datasheet

91
3. Press F3 to switch to Gated.
4. Press F2 to select Start Phase, define the Start and the Stop Point in a
waveform. The phase varies from -360° to +360°. For an Arbitrary Waveform, 0° is
the first waveform point.
5. Press F5 to switch between Positive/Negative. Set the Polarity for the Gated
Signal.
5.40. To Save and Recall
Press Save function button to enter the file system.
5.41. To Use USB Storage
The storage location is divided into the internal storage (FLASH) and the U disk storage
(USBDEVICE only P 4124 - 4165). When a U disk is connected, the storage menu will
show "USBDEVICE" and "FLASH". Otherwise, the storage menu will show "FLASH" only.
1. Install the U disk: insert a USB disk into the "⑨USB Host port" on the rear panel in
Abb 0-2; and the screen will show "Detect USB device". Press Save function button to
enter the file system, the storage menu will show "USBDEVICE" and "FLASH".
2. Enter the storage: Turn the knob or press / direction key to choose the
desired storage. Press F1 to enter the chosen storage. Provide operations as Next
level, Up one level, New folder, Delete, Rename, Copy, Paste.
3. Remove the U disk: Remove the U disk from the USB Host port on the rear panel.
The system will inform you "The USB device is removed", and the "USBDEVICE" in
the storage menu will disappear.
5.42. To Edit the File Name
In file system, the user can edit the name of a file or a folder. When the system needs the
user to input a name, an input keyboard will appear.
Figure 0-23: Edit the File Name
1. Turn the knob or press / direction key to move the cursor left and right in the
keyboard. Press F3 to switch between capital and small of the characters.